fsMIIpv6AddrAdminStatus
ARICENT-MIIPV6-MIB ·
.1.3.6.1.4.1.29601.2.35.1.4.1.3
Object
Indicates the desired status of the address. Also a creation of an address can trigger IPv6 to be enabled over the interface. Similarly deletion of all the address may trigger IPv6 to be disabled on the interface. NotInService value is not supported.
Context
- MIB
- ARICENT-MIIPV6-MIB
- OID
.1.3.6.1.4.1.29601.2.35.1.4.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIIpv6AddrEntry
- Table
- fsMIIpv6AddrTable
- Siblings
- 10
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIIpv6AddrAddress The IPv6 address to which this entry's addressing
information pertains. | column | OctetString | .1.3.6.1.4.1.29601.2.35.1.4.1.1 |
| fsMIIpv6AddrSENDCgaModifier This object stores the 128 bit modifier used for generating
cryptographically generated address (CGA).
Note: This object is defined as read-write object to enable it to be saved
a… | column | OctetString | .1.3.6.1.4.1.29601.2.35.1.4.1.10 |
| fsMIIpv6AddrSENDCollisionCount This object stores the collision count for Duplicate Address Detection (DAD).
Note: This object is defined as read-write object to enable it to be saved
and restored. Only read wr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.35.1.4.1.11 |
| fsMIIpv6AddrPrefixLen The length of the prefix (in bits) associated with
the IPv6 address of this entry. For a link-local address,
the prefix is always start with '0xfe80' and the prefix
length is 128 … | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.4.1.2 |
| fsMIIpv6AddrType Indicates whether the address is a unicast, anycast or
link-local address. Syntactically there is no difference
between a unicast address and a anycast address while a
link-local … | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.4.1.4 |
| fsMIIpv6AddrProfIndex Indicates the index into the IPv6 Address Profile Table.
This entry of the IPv6 Address Profile table defines the
parameters for this address. For a link-local address,
this objec… | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.4.1.5 |
| fsMIIpv6AddrOperStatus Indicates the operational status of the address. A
status of failed(4) indicates that a duplicate address has
been detected on this IPv6 interface. On interfaces on
which Duplicat… | column | Enumeration | .1.3.6.1.4.1.29601.2.35.1.4.1.6 |
| fsMIIpv6AddrContextId Indicates the virtual router to which the IPv6 address is
applied. | column | Integer32 | .1.3.6.1.4.1.29601.2.35.1.4.1.7 |
| fsMIIpv6AddrScope Scope is a 4-bit value that describes the scope of
an IPV6 address.An unicast address can possibly have 2
scopes (Linklocal and Global) only. A multicast address
can have a maxim… | column | INET-ADDRESS-MIBInetScopeType | .1.3.6.1.4.1.29601.2.35.1.4.1.8 |
| fsMIIpv6AddrSENDCgaStatus This object displays the CGA generation status.
When true, it indicates that the address is cryptographically generated address(CGA).
When false, it indicates that the address is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.35.1.4.1.9 |