fsMIBgp4mpePeerExtOverrideCapability
ARICENT-MI-BGP-MIB ·
.1.3.6.1.4.1.29601.2.77.22.1.18
Object
column
r/w
Enumeration
If this object is set to enable/disable the override capability
Context
- MIB
- ARICENT-MI-BGP-MIB
- OID
.1.3.6.1.4.1.29601.2.77.22.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIBgp4MpePeerExtEntry
- Table
- fsMIBgp4MpePeerExtTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIBgp4mpePeerExtPeerType The Type of the remote peer | column | ARICENT-BGP-MIBInetAddressType | .1.3.6.1.4.1.29601.2.77.22.1.1 |
| fsMIBgp4mpePeerExtTcpRcvBufSize This object configures the tcp window size on the receiver side. | column | Integer32 | .1.3.6.1.4.1.29601.2.77.22.1.10 |
| fsMIBgp4mpePeerExtLclAddress This object specifies which address should be used as the source address
of the TCP session initiated with the Peer. By default this object takes
value as 0 and the source address… | column | ARICENT-BGP-MIBInetAddress | .1.3.6.1.4.1.29601.2.77.22.1.11 |
| fsMIBgp4mpePeerExtNetworkAddress This object specifies the remote peer's network address. TCP connection is
established using the peer's remote-address. If the peer's remote-address
is a IPv4 address, the peer's … | column | ARICENT-BGP-MIBInetAddress | .1.3.6.1.4.1.29601.2.77.22.1.12 |
| fsMIBgp4mpePeerExtGateway This object specifies the gateway router's address that will be used as
nexthop in the routes advertised to the peer. This ensures that the
traffic coming from this peer is rou… | column | ARICENT-BGP-MIBInetAddress | .1.3.6.1.4.1.29601.2.77.22.1.13 |
| fsMIBgp4mpePeerExtCommSendStatus Community Send status of the peer.
o none - is for read-only
o send - send communities to this peer
o donotsend - do not send communities to this peer. | column | Enumeration | .1.3.6.1.4.1.29601.2.77.22.1.14 |
| fsMIBgp4mpePeerExtECommSendStatus Extended Community Send status of the peer.
o none - is for read-only
o send - send extended communities to this peer
o donotsend - do not send extended communities to… | column | Enumeration | .1.3.6.1.4.1.29601.2.77.22.1.15 |
| fsMIBgp4mpePeerExtPassive This object is used to set a peer connection to be passive, that means
the speaker will not initiate the session with that peer instead it
waits for the remote peer to initiate th… | column | Enumeration | .1.3.6.1.4.1.29601.2.77.22.1.16 |
| fsMIBgp4mpePeerExtDefaultOriginate If this object is set to enable/disable the advertisement of the default
route to the peer. This object overrides the global default
route configuration (fsMIBgp4DefaultOriginate)… | column | Enumeration | .1.3.6.1.4.1.29601.2.77.22.1.17 |
| fsMIBgp4mpePeerExtPeerRemoteAddr The remote IP address of this entry's BGP peer. | column | ARICENT-BGP-MIBInetAddress | .1.3.6.1.4.1.29601.2.77.22.1.2 |
| fsMIBgp4mpePeerExtConfigurePeer This object is used to create or delete a peer. If called with create
and no matching peer exists, then a new peer entry will be created. The
admin status of this newly created pe… | column | Enumeration | .1.3.6.1.4.1.29601.2.77.22.1.3 |
| fsMIBgp4mpePeerExtPeerRemoteAs The remote autonomous system number of the Peer. The peer admin status
can be made up only if this object is configured for a valid AS number.
When OPEN message is received from t… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.77.22.1.4 |
| fsMIBgp4mpePeerExtEBGPMultiHop This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected. By default, only directly connected E… | column | Enumeration | .1.3.6.1.4.1.29601.2.77.22.1.5 |
| fsMIBgp4mpePeerExtEBGPHopLimit This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected and seperated by a maximum hop limit a… | column | Integer32 | .1.3.6.1.4.1.29601.2.77.22.1.6 |
| fsMIBgp4mpePeerExtNextHopSelf This object specifies how the next hop attribute sent in the update
messages to this peer has to be generated. When the object takes the
value of self,the next Hop attribute wil… | column | Enumeration | .1.3.6.1.4.1.29601.2.77.22.1.7 |
| fsMIBgp4mpePeerExtRflClient This object specifies whether the peer is Client peer or Non-Client
peer. By default, the peer is created as Non-Client Peer. | column | Enumeration | .1.3.6.1.4.1.29601.2.77.22.1.8 |
| fsMIBgp4mpePeerExtTcpSendBufSize This object configures the tcp window size on the sender side. | column | Integer32 | .1.3.6.1.4.1.29601.2.77.22.1.9 |