fsMIBgp4GlobalTraceDebug
ARICENT-MI-BGP-MIB ·
.1.3.6.1.4.1.29601.2.77.1
Object
This object is used to enable global trace for the BGP module. A four byte integer value is specified for enabling the level of tracing. Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - All Failures, 1 - All Resource Allocation failure, 2 - Init & Shutdown Trace, 3 - Management Trace, 4 - Control Path Trace, 5 - Data Path Trace, 6 - Peer Connection Trace, 7 - Update Message Trace, 8 - FDB Update Trace, 9 - Keep-Alive Trace, 10 - All Transmission Trace, 11 - All Reception Trace, 12 - Dampening Trace, 13 - Events Trace, 14 - High level Packet Dump 15 - Low level packet Dump 16 - Hex Dump This Traces will be displayed when fsMIBgp4LocalAs is configured for any VR.
Context
- MIB
- ARICENT-MI-BGP-MIB
- OID
.1.3.6.1.4.1.29601.2.77.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsMIBgp
- Siblings
- 46
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIBgp4GRMode This object indicates whether the BGP speaker is restarting speaker
or receiving speaker. | scalar | Enumeration | .1.3.6.1.4.1.29601.2.77.10 |
| fsMIBgp4RestartSupport The router's support for BGP graceful restart Options include:
no restart support, only planned restarts, or both planned and unplanned
restarts. This object is persistent and whe… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.77.11 |
| fsMIBgp4RestartStatus Current status of BGP graceful restart, it indicates whether the speaker
restarted or not if it is restarted whether it is a planned restart or unplanned restart | scalar | Enumeration | .1.3.6.1.4.1.29601.2.77.12 |
| fsMIBgp4ForwardingPreservation This object indicates whether the forwarding plane is preserved during restart or not | scalar | Enumeration | .1.3.6.1.4.1.29601.2.77.13 |
| fsMIBgpContextTable This context table contains the global parameters of BGP
that is required to be configured for each context. | table | - | .1.3.6.1.4.1.29601.2.77.14 |
| fsMIBgp4RRDMetricTable A table describing the configuration of metric values to
the redistributed routes. | table | - | .1.3.6.1.4.1.29601.2.77.15 |
| fsMIBgpComm | node | - | .1.3.6.1.4.1.29601.2.77.16 |
| fsMIBgpExtComm | node | - | .1.3.6.1.4.1.29601.2.77.17 |
| fsMIBgp4TCPMD5Auth | node | - | .1.3.6.1.4.1.29601.2.77.18 |
| fsMIBgpAsc | node | - | .1.3.6.1.4.1.29601.2.77.19 |
| fsMIBgp4LocalAs This is Global local autonomous system number. | scalar | Unsigned32 | .1.3.6.1.4.1.29601.2.77.2 |
| fsMIBgp4MpeBgpPeerTable BGP peer table. This table contains, one entry per BGP peer,
information about the connections with BGP peers. | table | - | .1.3.6.1.4.1.29601.2.77.20 |
| fsMIBgp4MpeBgp4PathAttrTable The BGP-4 Received Path Attribute Table
contains information about paths to
destination networks received from all
BGP4 peers. | table | - | .1.3.6.1.4.1.29601.2.77.21 |
| fsMIBgp4MpePeerExtTable BGP Peer Extension Table. The entries in the table specifies
the additional features supported for a peer by futureBGP4
Speaker in addition to the features specified as in bgpPeer… | table | - | .1.3.6.1.4.1.29601.2.77.22 |
| fsMIBgp4MpeMEDTable BGP4 MED table. This table contains the MED values that are to
be assigned to routes. | table | - | .1.3.6.1.4.1.29601.2.77.23 |
| fsMIBgp4MpeLocalPrefTable BGP Local Preference table. This table contains,
the value that is to be assigned to the Local
Preference attibute. | table | - | .1.3.6.1.4.1.29601.2.77.24 |
| fsMIBgp4MpeUpdateFilterTable BGP Update Filter Table. This table contains
Rules to filter out updates based on the AS from
which it is received, NLRI and AS through which it
had passed. | table | - | .1.3.6.1.4.1.29601.2.77.25 |
| fsMIBgp4MpeAggregateTable BGP Aggregate Table. The entries in the table
specifies the IP address based on which the routing
information has to be aggregated. | table | - | .1.3.6.1.4.1.29601.2.77.26 |
| fsMIBgp4MpeImportRouteTable Non-BGP routes imported into the BGP RIB can be viewed through this table.
Also allows importing a static route into BGP.After updating the RIB tree,
if there is any change in the… | table | - | .1.3.6.1.4.1.29601.2.77.27 |
| fsMIBgp4MpeFsmTransitionHistTable Gets FSM transitions history per peer | table | - | .1.3.6.1.4.1.29601.2.77.28 |
| fsMIBgp4MpeRfd | node | - | .1.3.6.1.4.1.29601.2.77.29 |
| fsMIBgp4MaxPeerEntry The Maximum number of peers supported by BGP | scalar | Integer32 | .1.3.6.1.4.1.29601.2.77.3 |
| fsMIBgp4MpeComm | node | - | .1.3.6.1.4.1.29601.2.77.30 |
| fsMIBgp4MpeExtComm | node | - | .1.3.6.1.4.1.29601.2.77.31 |
| fsMIBgp4MpeCaps | node | - | .1.3.6.1.4.1.29601.2.77.32 |
| fsMIBgp4MpeRtRefresh | node | - | .1.3.6.1.4.1.29601.2.77.33 |
| fsMIBgp4MpeSoftReconfigOut | node | - | .1.3.6.1.4.1.29601.2.77.34 |
| fsMIBgp4MpePrefixCountersTable Additional per-peer, per AFI/SAFI counters for prefixes | table | - | .1.3.6.1.4.1.29601.2.77.35 |
| fsMIBgp4DistInOutRouteMap | node | - | .1.3.6.1.4.1.29601.2.77.36 |
| fsMIBgp4Notification | node | - | .1.3.6.1.4.1.29601.2.77.37 |
| fsMIBgp4NeighborRouteMap | node | - | .1.3.6.1.4.1.29601.2.77.38 |
| fsMIBgp4PeerGroupTable A table for configuring the bgp peer groups. Configuring
a property for the peer group copies it to all the peers
present in the peer group. | table | - | .1.3.6.1.4.1.29601.2.77.39 |
| fsMIBgp4MaxNoofRoutes It represents the maximum number of routes in the routing table | scalar | Integer32 | .1.3.6.1.4.1.29601.2.77.4 |
| fsMIBgp4PeerGroupListTable A table for adding/removing the bgp peers to a peer group. | table | - | .1.3.6.1.4.1.29601.2.77.40 |
| fsMIBgp4RestartReason The router's restarter reason of BGP graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade.
This object is persistent and when written
the entity SHOULD sa… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.77.41 |
| fsMIBgp4TCPMKTAuth | node | - | .1.3.6.1.4.1.29601.2.77.42 |
| fsMIBgp4TCPAOAuthPeer | node | - | .1.3.6.1.4.1.29601.2.77.43 |
| fsMIBgp4ORFListTable A table for adding/removing Outbound Route Filter entries received from the peer | table | - | .1.3.6.1.4.1.29601.2.77.44 |
| fsMIBgp4RRDNetworkTable A table for local network addresses that will be advertised to BGP . | table | - | .1.3.6.1.4.1.29601.2.77.45 |
| fsMIBgp4MacMobDuplicationTimeInterval This interval is the upper bound on the amount of time a VM
Moved among the PEs for about MaxMacMoves times. | scalar | Integer32 | .1.3.6.1.4.1.29601.2.77.46 |
| fsMIBgp4MaxMacMoves This is the Maximum number of times a VM(MAC) can be moved among PEs
before the Mac Duplication timer Interval expiry | scalar | Integer32 | .1.3.6.1.4.1.29601.2.77.47 |
| fsMIBgp4GRAdminStatus This object is used to enable or disable GR capability in BGP speaker. | scalar | Enumeration | .1.3.6.1.4.1.29601.2.77.5 |
| fsMIBgp4GRRestartTimeInterval This is the estimated time (in seconds) it will take for the BGP
session to be re-established after a restart. Suggested default value
should be less than or equal to Hold Time ca… | scalar | Integer32 | .1.3.6.1.4.1.29601.2.77.6 |
| fsMIBgp4RestartExitReason Describes the outcome of the last attempt at a graceful restart.
If the value is 'none': no restart has yet been attempted.
'inProgress': a restart attempt is currently underway.… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.77.7 |
| fsMIBgp4GRSelectionDeferralTimeInterval This interval is the upper bound on the amount of time a router
defers its route selection. The value of this timer should be large
enough, so as to provide all the peers of the R… | scalar | Integer32 | .1.3.6.1.4.1.29601.2.77.8 |
| fsMIBgp4GRStaleTimeInterval This interval is the upper bound on the amount of time a router retains
the stale routes.
The GR stale time interval configured can be used only for the new peers
sess… | scalar | Integer32 | .1.3.6.1.4.1.29601.2.77.9 |