fsLldpTraceOption
ARICENT-LLDP-MIB ·
.1.3.6.1.4.1.2076.158.1.4
Object
scalar
SNMPv2-SMIInteger32
This object is used to store the trace options that are enabled
by the user. The bit positions of the traces is shown below
Bit 0 - init-shut
Bit 1 - mgmt
Bit 2 - data
Bit 3 - ctrl
Bit 4 - pkt-dump
Bit 5 - resource
Bit 6 - all-fail
Bit 7 - buf
Bit 8 - inventory-management
Bit 9 - vid-digest
Bit 10 - mgmt-vid
Bit 11 - med-capability
Bit 12 - network-policy
Bit 13 - critical
Bit 14 - redundancy
Bit 15 - mandatory-tlv
Bit 16 - location-id
Bit 17 - ex-power-mdi
Bit 18 - port-descr
Bit 19 - sys-name
Bit 20 - sys-descr
Bit 21 - sys-capab
Bit 22 - mgmt-addr
Bit 23 - port-vlan
Bit 24 - ppvlan
Bit 25 - vlan-name
Bit 26 - proto-id
Bit 27 - mac-phy
Bit 28 - pwr-mdi
Bit 29 - lagg
Bit 30 - max-frame
Bit 31 - -
By default, critical trace(Bit 13) is set.
Context
- MIB
- ARICENT-LLDP-MIB
- OID
.1.3.6.1.4.1.2076.158.1.4- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- fsLldpSystem
- Siblings
- 8
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsLldpSystemControl The administrative system control status of LLDP
module. The value 'start' (1) indicates that all
resources required by LLDP module should be allocated
and LLDP should be suppor… | scalar | Enumeration | .1.3.6.1.4.1.2076.158.1.1 |
| fsLldpModuleStatus The administrative module status of LLDP module.
This enables or disables LLDP in the system. A value of
'enabled' (1) indicates that LLDP is enabled in the device
and can be en… | scalar | Enumeration | .1.3.6.1.4.1.2076.158.1.2 |
| fsLldpTraceInput This object stores the trace option string input given by the user.
To enable particular trace, the user has to enter
the corresponding string(given below) assigned for that.
For… | scalar | OctetString | .1.3.6.1.4.1.2076.158.1.3 |
| fsLldpTraceLevel This object is used to store the trace options that are enabled
by the user through WEBUI. The bit positions of the traces is shown below.
If all values are set, it means all trac… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.158.1.5 |
| fsLldpTagStatus When this object is enabled:
a) Tagged LLDP packets will be transmitted on the Edge Virtual Bridge
(EVB) - Uplink Access Ports (UAP).
Untagged LLDP packets will be transm… | scalar | Enumeration | .1.3.6.1.4.1.2076.158.1.6 |
| fsLldpConfiguredMgmtIpv4Address This object specifies the Configured management IPv4 address which
will be carried in the Management address TLV when the LLDP tag status
is set to 'enabled'. | scalar | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.2076.158.1.7 |
| fsLldpConfiguredMgmtIpv6Address This object specifies the Configured management IPv6 address which
will be carried in the Management address TLV when the LLDP tag status
is set to 'enabled'. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.2076.158.1.8 |
| fsLldpInterfaceLabel When this attribute is not disabled, ingress LLDPDU
processing will attempt to update the interface
description for the ingress interface. The description
is set based on the curr… | scalar | Enumeration | .1.3.6.1.4.1.2076.158.1.9 |