fsLldpTraceLevel

ARICENT-LLDP-MIB · .1.3.6.1.4.1.2076.158.1.5

Object

scalar r/w SNMPv2-SMIInteger32

This object is used to store the trace options that are enabled
by the user through WEBUI. The bit positions of the traces is shown below.
If all values are set, it means all traces are enabled
          
Bit 0  - init-shut
Bit 1  - mgmt
Bit 2  - data
Bit 3  - ctrl
Bit 4  - pkt-dump
Bit 5  - resource
Bit 6  - all-fail
Bit 7  - buf
          
Bit 8  - neigh-add
Bit 9  - neigh-del
Bit 10 - neigh-updt
Bit 11 - neigh-drop
Bit 12 - neigh-ageout
Bit 13 - critical
Bit 14 - redundancy
Bit 15 - chassis-id
          
Bit 16 - port-id
Bit 17 - ttl
Bit 18 - port-descr
Bit 19 - sys-name
Bit 20 - sys-descr
Bit 21 - sys-capab
Bit 22 - mgmt-addr
Bit 23 - port-vlan
          
Bit 24 - ppvlan
Bit 25 - vlan-name
Bit 26 - proto-id
Bit 27 - mac-phy
Bit 28 - pwr-mdi
Bit 29 - lagg
Bit 30 - max-frame
Bit 31 - -
          
By default, critical trace(Bit 13) is set.

Context

MIB: ARICENT-LLDP-MIB
OID: .1.3.6.1.4.1.2076.158.1.5
Type: scalar
Access: readwrite
Status: current
Parent: fsLldpSystem
Siblings: 8

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsLldpSystemControl The administrative system control status of LLDP module. The value 'start' (1) indicates that all resources required by LLDP module should be allocated and LLDP should be suppor…	scalar	Enumeration	`.1.3.6.1.4.1.2076.158.1.1`
fsLldpModuleStatus The administrative module status of LLDP module. This enables or disables LLDP in the system. A value of 'enabled' (1) indicates that LLDP is enabled in the device and can be en…	scalar	Enumeration	`.1.3.6.1.4.1.2076.158.1.2`
fsLldpTraceInput This object stores the trace option string input given by the user. To enable particular trace, the user has to enter the corresponding string(given below) assigned for that. For…	scalar	OctetString	`.1.3.6.1.4.1.2076.158.1.3`
fsLldpTraceOption This object is used to store the trace options that are enabled by the user. The bit positions of the traces is shown below Bit 0 - init-shut Bit 1 - mgmt Bit 2 - da…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.158.1.4`
fsLldpTagStatus When this object is enabled: a) Tagged LLDP packets will be transmitted on the Edge Virtual Bridge (EVB) - Uplink Access Ports (UAP). Untagged LLDP packets will be transm…	scalar	Enumeration	`.1.3.6.1.4.1.2076.158.1.6`
fsLldpConfiguredMgmtIpv4Address This object specifies the Configured management IPv4 address which will be carried in the Management address TLV when the LLDP tag status is set to 'enabled'.	scalar	INET-ADDRESS-MIBInetAddressIPv4	`.1.3.6.1.4.1.2076.158.1.7`
fsLldpConfiguredMgmtIpv6Address This object specifies the Configured management IPv6 address which will be carried in the Management address TLV when the LLDP tag status is set to 'enabled'.	scalar	INET-ADDRESS-MIBInetAddressIPv6	`.1.3.6.1.4.1.2076.158.1.8`
fsLldpInterfaceLabel When this attribute is not disabled, ingress LLDPDU processing will attempt to update the interface description for the ingress interface. The description is set based on the curr…	scalar	Enumeration	`.1.3.6.1.4.1.2076.158.1.9`