fsLldpSystemControl
ARICENT-LLDP-MIB ·
.1.3.6.1.4.1.2076.158.1.1
Object
scalar
r/w
Enumeration
The administrative system control status of LLDP
module. The value 'start' (1) indicates that all
resources required by LLDP module should be allocated
and LLDP should be supported in the device on all ports.
The value 'shutdown' (3) indicates that LLDP should be
shutdown in the device on all ports and all allocated
memory must be released.
Here, start and shutdown are configurable values.
shutdownInProgress can only be read and cannot be wriiten.
When 'shutdown' (3)is configured, the value is changed to
'shutdownInProgress' (2). This is because shutdownInProgress
is used to indicate that shutdown process has been initiated
by setting the object as shutdown but the process is not
comitted. The value should be changed to shutdown once
LLDP is shut on all ports and memory is released.
Context
- MIB
- ARICENT-LLDP-MIB
- OID
.1.3.6.1.4.1.2076.158.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsLldpSystem
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | start |
2 | shutdownInProgress |
3 | shutdown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsLldpModuleStatus The administrative module status of LLDP module.
This enables or disables LLDP in the system. A value of
'enabled' (1) indicates that LLDP is enabled in the device
and can be en… | scalar | Enumeration | .1.3.6.1.4.1.2076.158.1.2 |
| fsLldpTraceInput This object stores the trace option string input given by the user.
To enable particular trace, the user has to enter
the corresponding string(given below) assigned for that.
For… | scalar | OctetString | .1.3.6.1.4.1.2076.158.1.3 |
| fsLldpTraceOption This object is used to store the trace options that are enabled
by the user. The bit positions of the traces is shown below
Bit 0 - init-shut
Bit 1 - mgmt
Bit 2 - da… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.158.1.4 |
| fsLldpTraceLevel This object is used to store the trace options that are enabled
by the user through WEBUI. The bit positions of the traces is shown below.
If all values are set, it means all trac… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.158.1.5 |
| fsLldpTagStatus When this object is enabled:
a) Tagged LLDP packets will be transmitted on the Edge Virtual Bridge
(EVB) - Uplink Access Ports (UAP).
Untagged LLDP packets will be transm… | scalar | Enumeration | .1.3.6.1.4.1.2076.158.1.6 |
| fsLldpConfiguredMgmtIpv4Address This object specifies the Configured management IPv4 address which
will be carried in the Management address TLV when the LLDP tag status
is set to 'enabled'. | scalar | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.2076.158.1.7 |
| fsLldpConfiguredMgmtIpv6Address This object specifies the Configured management IPv6 address which
will be carried in the Management address TLV when the LLDP tag status
is set to 'enabled'. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.2076.158.1.8 |
| fsLldpInterfaceLabel When this attribute is not disabled, ingress LLDPDU
processing will attempt to update the interface
description for the ingress interface. The description
is set based on the curr… | scalar | Enumeration | .1.3.6.1.4.1.2076.158.1.9 |