fsLldpPortConfigNotificationType
ARICENT-LLDP-MIB ·
.1.3.6.1.4.1.2076.158.2.3.1.3
Object
column
r/w
Enumeration
This object is used to set the notification type.
If the associated fsLldpNotificationType object has a value of
remTabChg (1), then LLDP agent sends trap notification to NMS
whenever remote table change occurs.
If the associated fsLldpNotificationType object has a value of
misCfg (1), then LLDP agent sends trap notification to NMS
whenever mis-configuration is identified.
If the associated fsLldpNotificationType object has a value of
remTabChgAndMisCfg(3), then LLDP agent sends trap notification to
NMS whenever remote table change occurs and/or whenever
mis-configuration is identified.
LLDP agent sends the trap messages only when MIB Object
lldpPortConfigNotificationEnable is true. So,
fsLldpNotificationType Object is valid when
lldpPortConfigNotificationEnable object is true.
Context
- MIB
- ARICENT-LLDP-MIB
- OID
.1.3.6.1.4.1.2076.158.2.3.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsLldpLocPortEntry
- Table
- fsLldpLocPortTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | remTabChg |
2 | misCfg |
3 | remTabChgAndMisCfg |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsLldpLocPortIdSubtype The type of port identifier encoding used to identify the port
component associated with the local port.
When port id subtype is configured as portcomp/local it is… | column | Enumeration | .1.3.6.1.4.1.2076.158.2.3.1.1 |
| fsLldpLocPortId The string value used to identify the port component associated
with the local port.
Write operation to this object is allowed only when the port id
subtype is co… | column | OctetString | .1.3.6.1.4.1.2076.158.2.3.1.2 |
| fsLldpLocPortDstMac The MAC address to be used as destination MAC for the LLDP agent.
The default value would be the LLDP multicast MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2076.158.2.3.1.4 |
| fsLldpMedAdminStatus This object is used to enable or disable the LLDP-MED functionality in
particular port. A value of 'enabled' (1) indicates that
LLDP-MED functionality is enabled on the port. A … | column | Enumeration | .1.3.6.1.4.1.2076.158.2.3.1.5 |
| fsLldpLocPortExpReset This object supports enabling/disabling automatic port PoE
reset upon LLDP neighbor data expiration. When enabled, neighbor
expiration causes the PoE administrative state to be to… | column | Enumeration | .1.3.6.1.4.1.2076.158.2.3.1.6 |
| fsLldpLocPortExpResetCount Increments each time the PoE administrative state is toggled
(disabled/enabled) for the port based on LLDP neighbor data
expiration. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.158.2.3.1.7 |
| fsLldpLocPortAutoMedVoiceDisc This object supports enabling/disabling automatic
LLDP-MED VoIP device discovery processing. When
enabled, received LLDP-MED data is examined to
determine if automated voice VLAN-… | column | Enumeration | .1.3.6.1.4.1.2076.158.2.3.1.8 |
| fsLldpLocPortMgmtAddrTlvTx This object supports enabling/disabling Mgmt-Addr basic
TLV transmission on a per-port basis independent of
specific management addresses. When enabled, configured
management ad… | column | Enumeration | .1.3.6.1.4.1.2076.158.2.3.1.9 |