fsIssuMode
ARICENT-ISSU-MIB ·
.1.3.6.1.4.1.29601.2.103.1.9
Object
scalar
r/w
Enumeration
This object specifies the ISSU upgrade process that can be done in two modes.
- In 'fullcompatible' software upgrade, the node which gets upgraded
gets reloaded in 'warm-boot mode'. Hence data traffic through that
node does not get impacted during the upgrade procedure.
Static configuration and dynamic states are synched up from the active
node to the upgraded standby node.
This mode is feasible ONLY when software upgrade is across minor releases.
- In 'basecompatible' software upgrade, the standby node which gets
upgraded is booted in 'cold-boot'mode.
Static configuration and dynamic states are synched up from the active
node to the upgraded standby node.
This mode feasible for a major version of software upgrade.
- In 'incompatible' software upgrade, the standby node which gets
upgraded is booted in 'cold-boot'mode.
The static configuration and dynamic states are NOT synched up from the
active node.
When software upgrade to an incompatible software version is required
then ISSU in 'incompatible mode' should be configured.
The administrator triggered compatibility check helps to decide whether
the ISSU mode has to be configure in fullcompatible, basecompatible
or incompatible mode.
Note:
- Configuring 'fullcompatible or basecompatible mode' of ISSU, will leave
system unpredictable when the compatibility check resulted 'incompatible'.
- Appropriate ISSU mode should be configured before starting the ISSU
procedure through ISSU commands
Context
- MIB
- ARICENT-ISSU-MIB
- OID
.1.3.6.1.4.1.29601.2.103.1.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsIssuSystem
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | fullcompatible |
2 | basecompatible |
3 | incompatible |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsIssuMaintenanceMode This object allows the system to enter into maintenance mode or exit from maintenance
mode.
When this object is set as 'TRUE' it triggers the system to enter into
mai… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.103.1.1 |
| fsIssuCommand This object specifies ISSU process that has the following three steps to upgrade the software in both
active and standby nodes.
loadversion - Load new software in fu… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.10 |
| fsIssuCommandStatus This object specifies the status of previous ISSU command
notstarted - ISSU command is not triggered and this is the default state.
inprogress - Indicat… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.11 |
| fsIssuProcedureStatus This object specifies the overall status of previous ISSU procedure.
notinitiated - ISSU command is not triggered and this is the default state.
inprogress … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.12 |
| fsIssuRollbackSoftwareVersion This object specifies the version of the rollback software. When ISSU procedure has failed,
the system should be rolled back to this software version.
When ISSU is completed, thi… | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.13 |
| fsIssuTraceOption This object enables tracing in the selected
Issu Management module.
A 32 bit integer is used to store the Tracing level in the
specified module.
Different Tracing Lev… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.103.1.14 |
| fsIssuTrapStatus This object enables or disables the trap for ISSU Management feature. | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.15 |
| fsIssuLastUpgradeTime This object holds the timestamp of last software upgrade/downgrade through
ISSU procedure. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.29601.2.103.1.16 |
| fsIssuSoftwareCompatForVersion This object specifies the software version proposed to be loaded to the system
for which compatibility relationship with the current running software
needs to be verified.
When s… | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.17 |
| fsIssuMaintenanceOperStatus This object indicates if the configured maintenance mode is functionally
applied to the system or not.
When 'Maintenance mode' is set as 'TRUE' the 'maintenance operat… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.103.1.2 |
| fsIssuLoadSWPath This object specifies the path of the new software that can be
loaded to the system through In-Service Software Upgrade procedure. | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.3 |
| fsIssuRollbackSWPath This object defines the path from which software will be loaded if
ISSU fails [during software upgrade]. After ISSU is completed,
this will be same as the current software path.… | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.4 |
| fsIssuCurrentSWPath This object specifies the path of the current running software | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.5 |
| fsIssuSoftwareCompatFilePath This object specifies the path of the compatibility matrix file.
When software compatibility check is initiated, current software
version will be verified against this compatibi… | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.6 |
| fsIssuSoftwareCompatCheckInit This object specifies the software compatibility check initiation control.
When this object is set as 'true', software compatibility
check will be initiated.
Before i… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.103.1.7 |
| fsIssuSoftwareCompatCheckStatus This object specifies the result of previous software compatibility
check initiated.
notinitiated - ISSU compatibility check is not initiated and this
is the default … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.8 |