fsIssuMaintenanceMode
ARICENT-ISSU-MIB ·
.1.3.6.1.4.1.29601.2.103.1.1
Object
This object allows the system to enter into maintenance mode or exit from maintenance
mode.
When this object is set as 'TRUE' it triggers the system to enter into
maintenance mode in which In-Service Software Upgrade (ISSU) can be
carried out.
During this mode,
--> Management configuration to the system other than ISSU related
commands/objects are not allowed.
--> Hardware MAC table is frozen.
--> Protocols are maintained in the same state.
--> New programming to hardware will not be allowed.
When this object is set as 'FALSE' it triggers the system to exit from the
maintenance mode to restore normal system operations.
Context
- MIB
- ARICENT-ISSU-MIB
- OID
.1.3.6.1.4.1.29601.2.103.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsIssuSystem
- Siblings
- 16
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsIssuCommand This object specifies ISSU process that has the following three steps to upgrade the software in both
active and standby nodes.
loadversion - Load new software in fu… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.10 |
| fsIssuCommandStatus This object specifies the status of previous ISSU command
notstarted - ISSU command is not triggered and this is the default state.
inprogress - Indicat… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.11 |
| fsIssuProcedureStatus This object specifies the overall status of previous ISSU procedure.
notinitiated - ISSU command is not triggered and this is the default state.
inprogress … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.12 |
| fsIssuRollbackSoftwareVersion This object specifies the version of the rollback software. When ISSU procedure has failed,
the system should be rolled back to this software version.
When ISSU is completed, thi… | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.13 |
| fsIssuTraceOption This object enables tracing in the selected
Issu Management module.
A 32 bit integer is used to store the Tracing level in the
specified module.
Different Tracing Lev… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.103.1.14 |
| fsIssuTrapStatus This object enables or disables the trap for ISSU Management feature. | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.15 |
| fsIssuLastUpgradeTime This object holds the timestamp of last software upgrade/downgrade through
ISSU procedure. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.29601.2.103.1.16 |
| fsIssuSoftwareCompatForVersion This object specifies the software version proposed to be loaded to the system
for which compatibility relationship with the current running software
needs to be verified.
When s… | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.17 |
| fsIssuMaintenanceOperStatus This object indicates if the configured maintenance mode is functionally
applied to the system or not.
When 'Maintenance mode' is set as 'TRUE' the 'maintenance operat… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.103.1.2 |
| fsIssuLoadSWPath This object specifies the path of the new software that can be
loaded to the system through In-Service Software Upgrade procedure. | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.3 |
| fsIssuRollbackSWPath This object defines the path from which software will be loaded if
ISSU fails [during software upgrade]. After ISSU is completed,
this will be same as the current software path.… | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.4 |
| fsIssuCurrentSWPath This object specifies the path of the current running software | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.5 |
| fsIssuSoftwareCompatFilePath This object specifies the path of the compatibility matrix file.
When software compatibility check is initiated, current software
version will be verified against this compatibi… | scalar | OctetString | .1.3.6.1.4.1.29601.2.103.1.6 |
| fsIssuSoftwareCompatCheckInit This object specifies the software compatibility check initiation control.
When this object is set as 'true', software compatibility
check will be initiated.
Before i… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.103.1.7 |
| fsIssuSoftwareCompatCheckStatus This object specifies the result of previous software compatibility
check initiated.
notinitiated - ISSU compatibility check is not initiated and this
is the default … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.8 |
| fsIssuMode This object specifies the ISSU upgrade process that can be done in two modes.
- In 'fullcompatible' software upgrade, the node which gets upgraded
gets reloaded in 'wa… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.103.1.9 |