issPortCtrlPauseFloodTraceOption

ARICENT-ISS-MIB · .1.3.6.1.4.1.2076.81.2.2.1.21

Object

column r/w SNMPv2-SMIInteger32

This object is used to store the debug trace types that are enable by the user
for particular Interface. The bit positions of the traces is shown below.
Bit 0  - no trace
Bit 1  - init-shut
Bit 2  - mgmt
Bit 3  - sampling
Bit 4  - os resource
Bit 5  - entry
Bit 6  - exit

Context

MIB: ARICENT-ISS-MIB
OID: .1.3.6.1.4.1.2076.81.2.2.1.21
Type: column
Access: readwrite
Status: current
Parent: issPortCtrlEntry
Table: issPortCtrlTable
Siblings: 25

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
issPortCtrlIndex Interface index of the port for which the configuration in this entry applies.	column	Integer32	`.1.3.6.1.4.1.2076.81.2.2.1.1`
issPortAutoNegAdvtCapBits A value uniquely identifies the set of capabilities advertised by the local auto negotiation entity other than the standard capabilities supported by ifMauAutoNegCapAdvertisedBits…	column	OctetString	`.1.3.6.1.4.1.2076.81.2.2.1.10`
issPortCpuControlledLearning Enables or disables the CPU controlled learning on a port. The default behavior is hardware learning. By enabling this object software learning on that particular port is enable…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.11`
issPortMdiOrMdixCap Specifies the port should be in Auto-Mdix mode or Mdi/Mdix. Setting the value to `auto` enables the Auto MDIX in the port - issPortCtrlIndex. This will be effective…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.12`
issPortCtrlFlowControlMaxRate Configures the maximum rate (kbps) - a high water mark beyond which pause frames will be generated to flow control the ingress traffic. This value should be set to 0 if no pause f…	column	Integer32	`.1.3.6.1.4.1.2076.81.2.2.1.13`
issPortCtrlFlowControlMinRate Configures the minimum rate (kbps) - a low water mark below which pause frames generation will be stopped. This value should be set to a value lesser that of 'issPortCtrlFlowCon…	column	Integer32	`.1.3.6.1.4.1.2076.81.2.2.1.14`
issPortCtrlPauseFloodProtect This object is used to enable or disable the pause flood detection-only or detection and protection feature on a port. The default behavior is to have this feature disabled on a p…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.15`
issPortCtrlPauseFloodMode This object specifies the pause flood mode as disabled/detected-only/enabled 'disabled' - In this mode, port is not monitored for pause flood condition. …	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.16`
issPortCtrlPauseFloodStatus This object specifies the pause flood status. 'normal' - This status specifies that the pause flood condition has not been detected or the featur…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.17`
issPortCtrlPauseFloodReset This object is used to recover or re-eanble the pause-flood detection-only/enabled condition. Recovery action in Detection-only mode has to log every sampling and clear the status…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2076.81.2.2.1.18`
issPortCtrlPauseFloodStats This object is used to hold the number of times the port entered pause flood condition.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2076.81.2.2.1.19`
issPortCtrlMode Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates with…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.2`
issPortCtrlPauseFloodStatsClear This object is used to clear the number of times the port entered pause flood condition.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2076.81.2.2.1.20`
issPortCtrlSwitchModeType This object is used to configure switching mode configuration per port-level. Switching mode can be configured only for physical ports. When configur…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.22`
issPortCtrlSwitchModeStatus This object is a read-only scalar MIB object to reflect the switching mode configuration of the port in the hardware. Switching mode configuration: CutThroughSameSp…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.23`
issPortCtrlInbandAutoNeg This object is used to enable or disable the CPSS inband auto-negotiation. This is required by certain 1G transceivers.	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.24`
issPortCtrlBypassInbandAutoNeg This object is used to enable or disable the CPSS bypass inband auto-negotiation. When this is enabled auto-negotiation may be bypassed when negotiating link if one side does not …	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.25`
issPortCtrlForceSpeed This object is used to detect manual speed settings on sfp ports.	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.26`
issPortCtrlDuplex Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtr…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.3`
issPortCtrlSpeed Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from …	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.4`
issPortCtrlFlowControl deprecated Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obta…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.5`
issPortCtrlRenegotiate When configured as 'true', restarts autonegotiation on the interface. Once autonegotiation is restarted, the value of this object reverts to 'false'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2076.81.2.2.1.6`
issPortCtrlMaxMacAddr Specifies the maximum number of new MAC addresses that can be learnt over the interface.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.81.2.2.1.7`
issPortCtrlMaxMacAction Specifies the action to be taken when the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'drop', the packe…	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.8`
issPortHOLBlockPrevention Enables or disables Head-Of-Line Blocking prevention on a port.	column	Enumeration	`.1.3.6.1.4.1.2076.81.2.2.1.9`