issCpuMirrorType
ARICENT-ISS-MIB ·
.1.3.6.1.4.1.2076.81.3.10
Object
scalar
r/w
Enumeration
This object is used to set the type of mirroring to be done for CPU traffic. When set to 'ingress(1)', enables mirroring of ingress traffic over CPU port to the CPU mirrored-to port specified in 'issCpuMirrorToPort'. When set to 'egress(2)', enables mirroring of egress traffic over CPU port to the CPU mirrored-to port. specified in 'issCpuMirrorToPort'. When set to 'both(3)', enables mirroring of egress and ingress traffic over CPU port to the CPU mirrored-to port specified in 'issCpuMirrorToPort'. When set to 'disable(4)', CPU mirroring configuration will be removed.
Context
- MIB
- ARICENT-ISS-MIB
- OID
.1.3.6.1.4.1.2076.81.3.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- issMirror
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ingress |
2 | egress |
3 | both |
4 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| issMirrorStatus This object is used to enable/disable mirroring
feature in hardware.
When set to 'disabled (1)', all mirroring configurations will be
removed from hardware.
When set to 'enabled (… | scalar | Enumeration | .1.3.6.1.4.1.2076.81.3.1 |
| issCpuMirrorToPort This object specifies the physical port to which the CPU traffic specified
by issCpuMirrorType are mirrored. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.81.3.11 |
| issMirrorToPort Specifies the port to which the active mirrored traffic controlled
by issMirrorCtrlTable is to be copied. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.81.3.2 |
| issMirrorCtrlTable A table to control mirroring features for each interface
in the switch.
Parameters in this table are valid only when the
'issMirrorStatus' for the switch is not 'disa… | table | - | .1.3.6.1.4.1.2076.81.3.3 |
| issMirrorCtrlRemainingSrcRcrds Specifies the number of source records remaining in the system.
Each record can store at least one source information. In case
consecutive source id are configured then record wi… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.81.3.4 |
| issMirrorCtrlRemainingDestRcrds Specifies the number of destination records remaining in the system.
Each record can store at least one destination information. In case
consecutive destination id are configured… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.81.3.5 |
| issMirrorCtrlExtnTable This Table is used to configure advanced mirroring features like
- Port Based Mirroring:
- flow based mirroring
- vlan based mirroring
Following are the configurat… | table | - | .1.3.6.1.4.1.2076.81.3.6 |
| issMirrorCtrlExtnSrcTable A table to configure list of source entities for mirroring sessions | table | - | .1.3.6.1.4.1.2076.81.3.7 |
| issMirrorCtrlExtnSrcVlanTable A table to configure list of vlan source entities for mirroring sessions | table | - | .1.3.6.1.4.1.2076.81.3.8 |
| issMirrorCtrlExtnDestinationTable A table to configure list of destination entities | table | - | .1.3.6.1.4.1.2076.81.3.9 |