fsipv6AddrType
ARICENT-IPV6-MIB ·
.1.3.6.1.4.1.2076.28.1.2.4.1.5
Object
column
r/w
Enumeration
Indicates whether the address is a unicast, anycast or link-local address. Syntactically there is no difference between a unicast address and a anycast address while a link-local address has the prefix '0xfe80'. This object can be modified only if fsipv6AddrOperStatus is down.
Context
- MIB
- ARICENT-IPV6-MIB
- OID
.1.3.6.1.4.1.2076.28.1.2.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsipv6AddrEntry
- Table
- fsipv6AddrTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unicast |
2 | anycast |
3 | linklocal |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsipv6AddrIndex The index value which uniquely identifies the IPv6
interface on which this IPv6 address entry exists.
The interface identified by a particular value of this
index is the same int… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2076.28.1.2.4.1.1 |
| fsipv6AddrSENDCgaModifier This object stores the 128 bit modifier used for generating
cryptographically generated address (CGA).
Note: This object is defined as read-write object to enable it to be saved … | column | OctetString | .1.3.6.1.4.1.2076.28.1.2.4.1.10 |
| fsipv6AddrSENDCollisionCount This object stores the collision count for Duplicate Address Detection (DAD).
Note: This object is defined as read-write object to enable it to be saved
and restored. Only r… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.28.1.2.4.1.11 |
| fsipv6AddrAddress The IPv6 address to which this entry's addressing
information pertains. | column | OctetString | .1.3.6.1.4.1.2076.28.1.2.4.1.2 |
| fsipv6AddrPrefixLen The length of the prefix (in bits) associated with
the IPv6 address of this entry. For a link-local address,
the prefix is always start with '0xfe80' and the prefix
length is 128 … | column | Integer32 | .1.3.6.1.4.1.2076.28.1.2.4.1.3 |
| fsipv6AddrAdminStatus Indicates the desired status of the address. Also a creation
of an address can trigger IPv6 to be enabled over the
interface. Similarly deletion of all the address may trigger
IPv… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.28.1.2.4.1.4 |
| fsipv6AddrProfIndex Indicates the index into the IPv6 Address Profile Table.
This entry of the IPv6 Address Profile table defines the
parameters for this address. For a link-local address,
this objec… | column | Integer32 | .1.3.6.1.4.1.2076.28.1.2.4.1.6 |
| fsipv6AddrOperStatus Indicates the operational status of the address. A
status of failed(4) indicates that a duplicate address has
been detected on this IPv6 interface. On interfaces on
which Duplicat… | column | Enumeration | .1.3.6.1.4.1.2076.28.1.2.4.1.7 |
| fsipv6AddrScope Scope is a 4-bit value that describes the scope of
an IPV6 address.An unicast address can possibly have 2
scopes (Linklocal and Global) only. A multicast address
can have a maxim… | column | INET-ADDRESS-MIBInetScopeType | .1.3.6.1.4.1.2076.28.1.2.4.1.8 |
| fsipv6AddrSENDCgaStatus This object displays the CGA generation status.
When true, it indicates address is cryptographically generated address(CGA).
When false, it indicates the address is not a crypto… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.28.1.2.4.1.9 |