fsipv6SecAssocLifetime
ARICENT-IPSECV6-MIB ·
.1.3.6.1.4.1.2076.29.2.4.1.13
Object
column
r/w
Integer32
This specifies the duration in seconds for which this Security Association remains active. After this time interval, the entry becomes inactive and has to be manually made active again. If the value is 0, it signifies that the lifetime is infinity. By default it is set to infinity. Valid values are in the range 300 to 2592000.
Context
- MIB
- ARICENT-IPSECV6-MIB
- OID
.1.3.6.1.4.1.2076.29.2.4.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsipv6SecAssocEntry
- Table
- fsipv6SecAssocTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-0
range: 300-2592000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsipv6SecAssocIndex A unique non-zero value identifying the
particular Security Association.
This index value is used by the object
fsipv6SecPolicySaBundle of the policy
table to associate the poli… | column | Integer32 | .1.3.6.1.4.1.2076.29.2.4.1.1 |
| fsipv6SecAssocEspKey2 This object is used for configuring the second key
of 3des-cbc.This key must be 8 Bytes only | column | OctetString | .1.3.6.1.4.1.2076.29.2.4.1.10 |
| fsipv6SecAssocEspKey3 This object is used for configuring the third key
of 3des-cbc.This key must be 8 Bytes only | column | OctetString | .1.3.6.1.4.1.2076.29.2.4.1.11 |
| fsipv6SecAssocLifetimeInBytes The timer interval interms of number of bytes.
IPSEC counts the number of bytes to which the
IPSEC algorithm is applied. This object specifies the
allowed maximum number of bytes.… | column | Integer32 | .1.3.6.1.4.1.2076.29.2.4.1.12 |
| fsipv6SecAssocAntiReplay The object is used for activating the anti
repaly functionality of the security protocols | column | Enumeration | .1.3.6.1.4.1.2076.29.2.4.1.14 |
| fsipv6SecAssocStatus This object is used to create and delete rows
from the fsipv6SecAssocTable. It can be set
to the value of createAndGo(4),createAndWait(5),
notInService(2),active(1) and destroy(… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.29.2.4.1.15 |
| fsipv6SecAssocDstAddr This destination address is matched with the
destination address in the packet during
authentication of inbound and outbound datagrams. | column | OctetString | .1.3.6.1.4.1.2076.29.2.4.1.2 |
| fsipv6SecAssocProtocol Security header used for either authentication
(AH) or encryption (ESP). | column | Enumeration | .1.3.6.1.4.1.2076.29.2.4.1.3 |
| fsipv6SecAssocSpi This is an arbitrary 32-bit value identifying
the security association for this datagram. The
Security Parameter Index value 0 is reserved to
Indicate that 'no security associatio… | column | Integer32 | .1.3.6.1.4.1.2076.29.2.4.1.4 |
| fsipv6SecAssocMode The supporting security association mode.
The secassoc mode is configured as Transport or Tunnel
when the router is acting as a host. A Security gateway
can be configured only in… | column | Enumeration | .1.3.6.1.4.1.2076.29.2.4.1.5 |
| fsipv6SecAssocAhAlgo The authentication algorithm configured for
the particular security association entry.
This object is not mandatory for creation
of an entry.Setting the algorithm to keyed-md5(2)
… | column | Enumeration | .1.3.6.1.4.1.2076.29.2.4.1.6 |
| fsipv6SecAssocAhKey This is the key used for authentication
when the algorithm configured is either
keyed-md5 or hmac-md5 or hmach-sha1 .
This object is not mandatory for creation
of an entry. If… | column | OctetString | .1.3.6.1.4.1.2076.29.2.4.1.7 |
| fsipv6SecAssocEspAlgo The type of algorithm used for Encapsulation
Security Palyload (ESP) Header.This object is to
be configured only if the Security protocol to be
used is ESP | column | Enumeration | .1.3.6.1.4.1.2076.29.2.4.1.8 |
| fsipv6SecAssocEspKey ESP authentication key.This must be of
8 Bytes only | column | OctetString | .1.3.6.1.4.1.2076.29.2.4.1.9 |