fsMIFsbTraceOption
ARICENT-FSB-MI-MIB ·
.1.3.6.1.4.1.29601.2.102.1.1.1.7
Object
This object is enables Trace Statements in
FSB module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer represents a particular
level of Trace.
The mapping between the bit positions & the level of trace is
as follows:
0 - Init and Shutdown Traces
1 - Management Traces
2 - Data Path Traces
3 - Control Plane Traces
4 - Packet Dump Traces
5 - Traces related to All Resources except Buffers
6 - All Failure Traces
7 - Buffer Traces
8 - Critical Traces
The remaining bits are unused. Combination of levels are
also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are set then user has to
set the value 3.
Context
- MIB
- ARICENT-FSB-MI-MIB
- OID
.1.3.6.1.4.1.29601.2.102.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIFsbContextEntry
- Table
- fsMIFsbContextTable
- Siblings
- 10
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIFsbContextId This object distinguishes between the
multiple virtual bridge contexts within a bridge. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.102.1.1.1.1 |
| fsMIFsbDefaultVlanId This object configures the VLAN ID used in the system for classifying
untagged VLAN discovery frames in FIP Snooping Module,
in this virtual switch context.
This o… | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.29601.2.102.1.1.1.10 |
| fsMIFsbRowStatus This object specifies the status of the conceptual row.
The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value be… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.102.1.1.1.11 |
| fsMIFsbSystemControl This object controls status requested
by management for the FSB feature.
When set to 'start(1)', FSB module will be started in this context,
memory allocated for … | column | Enumeration | .1.3.6.1.4.1.29601.2.102.1.1.1.2 |
| fsMIFsbModuleStatus This object enables or disables FIP Snooping functionality in the system. A value of
'enabled' (1) indicates that FIP Snooping is enabled in the device.
A value of 'disabled' (2)… | column | Enumeration | .1.3.6.1.4.1.29601.2.102.1.1.1.3 |
| fsMIFsbFcMapMode This object specifies the FCMAP mode supported in the FIP Snooping Ethernet
Bridge.
When the object is set to global, the value of fsMIFsbFcmap
is used in the vali… | column | Enumeration | .1.3.6.1.4.1.29601.2.102.1.1.1.4 |
| fsMIFsbFcmap This object configures the FC-MAP value associated with the
FIP snooping Ethernet Bridge. | column | OctetString | .1.3.6.1.4.1.29601.2.102.1.1.1.5 |
| fsMIFsbHouseKeepingTimePeriod This object specifies the amount of time the FCoE switch waits to receive keep alive
messages from the ENode for a given FCoE session.
When the time expires and no keep alive mess… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.102.1.1.1.6 |
| fsMIFsbTrapStatus This object enables or disables the trap for FIP Snooping module. | column | Enumeration | .1.3.6.1.4.1.29601.2.102.1.1.1.8 |
| fsMIFsbClearStats This object is used to clear the global statistics, per vlan
statistics and per session statistics in this virtual switch context. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.102.1.1.1.9 |