fsErpsRingRplNextNeighbourPort
ARICENT-ERPS-MIB ·
.1.3.6.1.4.1.29601.2.40.2.1.1.22
Object
This object identifies the RPL Next Neighbour port of the ring.
Valid values for this object are '0', 'IfIndex of fsErpsRingPort1' and
'IfIndex of fsErpsRingPort2'.
When a port is configured as a RPL Next Neighbour port, that node becomes RPL
Next Neighbour node for that ring. [Reference : Section VIII.4 of
ITU-T G.8032 Y.1344 (03/2010)]
Value '0' indicates that none of the ring ports is a RPL Next Neighbour port
and hence the node is not a RPL Next Neighbour.
In an interconnected node of a sub-ring, the 'fsErpsRingPort1' alone
can be chosen as an RPL Neighbour port when administrator decides to have the
interconnected node as the RPL Neighbour of the sub-ring.
RPL owner node, RPL Neighbour node and RPL next neighbour node cannot be enabled
at the same Ethernet Ring Node.
Administrator has to ensure that, only nodes in a ring which are adjacent to
the RPL owner or RPL Neighbour node are configured as RPL Next Neighbour Nodes.
This object is applicable only when the compatible version is 2.
Context
- MIB
- ARICENT-ERPS-MIB
- OID
.1.3.6.1.4.1.29601.2.40.2.1.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsErpsRingEntry
- Table
- fsErpsRingTable
- Siblings
- 29
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsErpsRingId Unique numeric identifier of a ring within the context for administrative
purposes. In service based protection mode(Multiple ERP instances), this
object represents the id of the… | column | RingId | .1.3.6.1.4.1.29601.2.40.2.1.1.1 |
| fsErpsRingMonitorMechanism This object indicates the type of monitoring mechanism used for
detecting faults of the ring link.
Currently 'cfm' and 'MPLS OAM' is supported as monitoring mecha… | column | RingMonitorMechanismType | .1.3.6.1.4.1.29601.2.40.2.1.1.10 |
| fsErpsRingPort1Status This object indicates ring port1's current status updated by
ERPS control process of this ring.
If the status is blocked then:
- Data traffic will be blocked on this port.
… | column | Enumeration | .1.3.6.1.4.1.29601.2.40.2.1.1.11 |
| fsErpsRingPort2Status This object indicates ring port2's current status updated by
ERPS control process of this ring.
If the status is blocked then:
- Data traffic will be blocked on this port.
… | column | Enumeration | .1.3.6.1.4.1.29601.2.40.2.1.1.12 |
| fsErpsRingSemState This object gives the node state as per the G.8032 state event
machine. When ring Row status is not active or when ERPS is disabled
in the virtual context, this object will show … | column | Enumeration | .1.3.6.1.4.1.29601.2.40.2.1.1.13 |
| fsErpsRingNodeStatus A 32 bit mask giving the current status of the ring by specifying the
events/status currently present.
Bit 1 - Signal-failure on Ring Port 1
Bit 2 - Signal-fa… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.40.2.1.1.14 |
| fsErpsRingRowStatus Row status of the ring entry. Entries in this table can be modified
by setting the RowStatus as NOT_IN_SERVICE.
This RowStatus can be made active only if:
- fsE… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.40.2.1.1.15 |
| fsErpsRingMacId This object represents the id of the ring instance to be communicated
via R-APS PDUs to other ring nodes. For this ring instance, the value
of this object forms the last octet of… | column | Integer32 | .1.3.6.1.4.1.29601.2.40.2.1.1.16 |
| fsErpsRingProtectedVlanGroupId This object identifies the vlan group associated with this ring
instance.
If VlanGroupManager is 'mstp', then this object identifies the
Mstp Instance Id.
Otherwise this object… | column | Integer32 | .1.3.6.1.4.1.29601.2.40.2.1.1.17 |
| fsErpsRingProtectionType This object specifies the type of protection being provided by this
ring instance. The following two protection switching types are
possible:
portBased - Port Based Protectio… | column | Enumeration | .1.3.6.1.4.1.29601.2.40.2.1.1.18 |
| fsErpsRingRAPSCompatibleVersion This is used to configure the compatible version number of the node in the ring.
The default value is version2 (2).[Reference : Section 10.1.13 Backward
compatibility logic of ITU… | column | Enumeration | .1.3.6.1.4.1.29601.2.40.2.1.1.19 |
| fsErpsRingVlanId This object identifies the dedicated VLAN Id used by a ring for its
R-APS messages communication.
It is recommended that the,
* R-APS VLANs should be used only… | column | ARICENTQ-BRIDGE-MIBVlanId | .1.3.6.1.4.1.29601.2.40.2.1.1.2 |
| fsErpsRingRplNeighbourPort This object identifies the RPL Neighbour port of the ring .
Valid values for this object are '0', 'IfIndex of fsErpsRingPort1' and
'IfIndex of fsErpsRingPort2'.
… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.29601.2.40.2.1.1.20 |
| fsErpsRingRAPSSubRingWithoutVC This configuration helps to configure the sub-ring to run with or
without an RAPS Virtual Channel.
When this object is set to 'false',the sub-ring is configured t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.40.2.1.1.21 |
| fsErpsRingPort1NodeID This object indicates the Node ID of the Last R-APS PDU
received on ring port 1.
This object is used for the Flush Logic feature
mentioned in Section 10.1.10 of ITU-T G.8032 Y.134… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.40.2.1.1.23 |
| fsErpsRingPort2NodeID This object indicates the Node ID of the Last R-APS PDU
received on ring port 2.
This object is used for the Flush Logic feature
mentioned in Section 10.1.10 of ITU-T G.8032 Y.134… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.40.2.1.1.24 |
| fsErpsRingPort1BPRBitVal This object indicates the Blocked Port Reference (BPR bit)
status of the Last R-APS PDU Received on ring port 1.
This object is used for the Flush Logic feature
mentioned in Secti… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.40.2.1.1.25 |
| fsErpsRingPort2BPRBitVal This object indicates the Blocked Port Reference (BPR bit)
status of the Last R-APS PDU Received on ring port 2.
This object is used for the Flush Logic feature
mentioned in Secti… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.40.2.1.1.26 |
| fsErpsRingProtectedVlanGroupList This object indicates the list of VLAN groups mapped to the ring entry.
If the ring is running in portBased protection mode then this
object will not have any effec… | column | OctetString | .1.3.6.1.4.1.29601.2.40.2.1.1.27 |
| fsErpsRingServiceType This object indicates the service on which protection is provided
for this ring.
The following service types are provided.
- vlan(1)
- mplsLSP(2)
- mplsPW(3)
-… | column | RingServiceType | .1.3.6.1.4.1.29601.2.40.2.1.1.28 |
| fsErpsRingPort1SubPortList This object specifies the list of interfaces to which R-APS service can be extended,
without actually running R-APS. An interface identified in this
fsErpsRingPort1SubPortList is… | column | OctetString | .1.3.6.1.4.1.29601.2.40.2.1.1.29 |
| fsErpsRingName This object indicates the name of the ring. By default, the ring name
will be constructed by appending ring ID to the string 'ring'.
Example: Default ring name for a ring with ID… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.29601.2.40.2.1.1.3 |
| fsErpsRingPort2SubPortList This object specifies the list of interfaces to which R-APS support is extended,
without actually running R-APS. An interface identified in this
fsErpsRingPort2SubPortList is th… | column | OctetString | .1.3.6.1.4.1.29601.2.40.2.1.1.30 |
| fsErpsRingPort1 First port of the two ring ports participating in the ring. Any
interface with valid interface ID can be configured as a ring port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.29601.2.40.2.1.1.4 |
| fsErpsRingPort2 Second port of the two ring ports participating in the ring. Any
interface with valid interface ID can be configured as a ring port.
On the interconnected node of a sub-ring, thi… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.29601.2.40.2.1.1.5 |
| fsErpsRingRplPort This object identifies the RPL port of the ring.
Valid values for this object are '0', 'IfIndex of fsErpsRingPort1' and
'IfIndex of fsErpsRingPort2'.
… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.29601.2.40.2.1.1.6 |
| fsErpsRingPortBlockingOnVcRecovery This object is applicable for the interconnected nodes of a sub-ring.
This configuration helps to avoid the possibility of temporary loops
getting formed in the sub-ring during … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.40.2.1.1.7 |
| fsErpsRingNodeType This object identifies the node state of this ring node.
If fsErpsRingRplPort is configured for a ring node, then that ring
node becomes 'rplOwner', otherwise the node remains as… | column | Enumeration | .1.3.6.1.4.1.29601.2.40.2.1.1.8 |
| fsErpsRingOperatingMode This object identifies whether the ring is operating in revertive or
nonRevertive manner.
In revertive mode of operation, once the failed link recovers, the data
path will be swit… | column | Enumeration | .1.3.6.1.4.1.29601.2.40.2.1.1.9 |