fsMIY1731MepLbmNodeId
ARICENT-ECFM-Y1731-MI-MIB ·
.1.3.6.1.4.1.29601.2.7.1.2.4.1.135
Object
This object specifies the Node Id of the specific MIP node in MPLS-TP
network for which loopback connectivity verification(ping) or diagnostic
tests has to be initiated.
This must be interpreted in conjunction with the fsMIY1731MepLbmIcc
object.
This must be configured in conjunction with
fsMIY1731MepTransmitLbmDestType as mipid(3),
fsMIY1731MepLbmIcc, fsMIY1731MepLbmIfNum. fsMIY1731MepLbmTTL.
This object must be set ONLY to perform loopback connectivity
verification or diagnostic tests to a MIP (and not for remote MEP) in
the MPLS-TP network.
Context
- MIB
- ARICENT-ECFM-Y1731-MI-MIB
- OID
.1.3.6.1.4.1.29601.2.7.1.2.4.1.135- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIY1731MepEntry
- Table
- fsMIY1731MepTable
- Siblings
- 136
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIY1731MepIdentifier This object specifies the Integer that is unique among all the MEPs in the same ME.
Other definition is: a small integer, unique over a given
Maintenance Entity, identifying a spe… | column | IEEE8021-CFM-MIBDot1agCfmMepId | .1.3.6.1.4.1.29601.2.7.1.2.4.1.1 |
| fsMIY1731MepTransmitLbmStatus This object specifies an Enumerated value set to 'start' to initiate LBM transmission
and 'stop' to stop LBM transmission.
'ready' and 'notReady' indicates whether LBM can be ini… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.10 |
| fsMIY1731MepLckCondition This object specifies if MEP is in LCK condition.
LCK condition occurs when it receives a LCK frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.100 |
| fsMIY1731MepLckInterval This object specifies the Interval between two successive LCK transmissions to be
used by the MEP. | column | FsY1731AisLckInterval | .1.3.6.1.4.1.29601.2.7.1.2.4.1.101 |
| fsMIY1731MepLckPeriod This object specifies the Time period (in seconds) for which LCK messages are to be
transmitted. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.102 |
| fsMIY1731MepLckPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LCK frame. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.103 |
| fsMIY1731MepLckDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LCK frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.104 |
| fsMIY1731MepLckDelay This object specifies When a MEP is set as locked (for out-of-service operations), data traffic through
that MEP will be blocked after this delay. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.105 |
| fsMIY1731MepDefectConditions This object specifies a vector of Boolean indicates the defect conditions. | column | FsY1731MepDefects | .1.3.6.1.4.1.29601.2.7.1.2.4.1.106 |
| fsMIY1731MepUnicastCcmMacAddress This object specifies the Unicast MacAddress used for performance monitoring through Continuity
Check Messages.
Continuity Check Messages are to be transmitted as … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.107 |
| fsMIY1731MepRowStatus This object specifies the status of MEP row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.108 |
| fsMIY1731MepRxFCf This object specifies the value of fsMIY1731MepRxFCf field is the value of in-profile data frames
received from its peer MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.109 |
| fsMIY1731MepTransmitLbmResultOK This object specifies the result of LBM transaction,
- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.11 |
| fsMIY1731Mep1DmTransInterval This object specifies the Time interval (in 0.01 seconds) between two successive One-way DM Transactions
and is used to carry out Delay Variation Measurement for
1DM transactions.… | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.110 |
| fsMIY1731MepTransmitThDestMacAddress This object specifies the the Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for Throughput Measurement. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.111 |
| fsMIY1731MepTransmitThDestMepId This object specifies an indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Asso… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.7.1.2.4.1.112 |
| fsMIY1731MepTransmitThDestIsMepId This object when True indicates that MEPID of the target MEP is used for
Throughput Measurement.
False indicates that unicast destination MAC address of the
target MEP is used f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.113 |
| fsMIY1731MepTransmitThMessages This object specifies the number of Throughput messages (LBM / TST) to be transmitted. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.114 |
| fsMIY1731MepTransmitThPps This object specifies the number of Throughput messages being transmitted in a second.
It is used to calculate the time interval between two successive
message transmission. It's… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.115 |
| fsMIY1731MepTransmitThDeadline This object specifies a timeout, in seconds, before Throughput Measurement operation exits.
Throughput Measurement operation exits, if configured number of messages are
sent befo… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.116 |
| fsMIY1731MepTransmitThType This object specifies the Type of Throughput measurement to be initiated:
- oneWay(1) Measurement (by TST) is calculated at initiation end with
the use of VSM P… | column | Enumeration | .1.3.6.1.4.1.29601.2.7.1.2.4.1.117 |
| fsMIY1731MepTransmitThStatus This object specifies an Enumerated value set to 'start' to initiate Throughput transaction
and 'stop' to stop Throughput transaction.
'ready' and 'notReady' indicates whether Th… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.118 |
| fsMIY1731MepTransmitThFrameSize The object specifies the initial total packet size configured by the user
including the Test TLV of the (LBM / TST) message.
As the Frame Size value is varied to c… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.119 |
| fsMIY1731MepTransmitLbmDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitL… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.12 |
| fsMIY1731MepTransmitThBurstMessages This object specifies the number of Throughput messages (LBM / TST) to be transmitted in a
burst. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.120 |
| fsMIY1731MepTransmitThBurstDeadline This object specifies the time period, in milliseconds, for which a burst exists (LB Burst
/ TST Burst ). | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.121 |
| fsMIY1731MepTransmitThBurstType This object specifies the Throughput Burst can be initiated as:
- burstMessages(1) Number of Throughput messages (LBM / TST) to be
transmitted in a burst.
… | column | Enumeration | .1.3.6.1.4.1.29601.2.7.1.2.4.1.122 |
| fsMIY1731MepTransmitThTestPatternType This object specifies the type of the pattern to be included in the test TLV of
Throughput frame(LBM/TST PDU) .
TestTlvPattern Types can be:
patternNullSignalWithoutCRC32(0) Patte… | column | FsY1731TestTlvPatternType | .1.3.6.1.4.1.29601.2.7.1.2.4.1.123 |
| fsMIY1731MepThVerifiedBps This object specifies the verified throughput value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.124 |
| fsMIY1731MepThUnVerifiedBps This object specifies the throughput value under verification. This is the
throughput value for which verification is still to be performed. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.125 |
| fsMIY1731MepTransmitLbmMode This object specifies the LBMs which can be initiated as:
- burst(1) Lbms are initiated without waiting for the reception of
LBR PDUs.
- request… | column | Enumeration | .1.3.6.1.4.1.29601.2.7.1.2.4.1.126 |
| fsMIY1731MepLbmOut This object specifies the Number of LBM messages transmitted. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.127 |
| fsMIY1731MepTransmitLbmTimeout This object specifies the Time for all the replies (LBR) of LBMs to be received by
the MEP.No reply (LBR) would be entertained thereafter (timeout). | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.128 |
| fsMIY1731MepTstCapability This object specifies the administrative status of Tst capability.
This enables or disables capability of MEP to initiate and process
Tst operation.
A value of 'enabled' (1) ind… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.129 |
| fsMIY1731MepTransmitLbmDestMepId This object specifies the Maintenance association End Point Identifier of another
MEP in the same Maintenance Entity to which the LBM is
to be sent.
This address will be used if t… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.7.1.2.4.1.13 |
| fsMIY1731MepTransmitThResultOK This object specifies the result of Th transaction,
- true The TH Message(s) will be
(or has been) sent.
- false The TH Message(s) will not
b… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.130 |
| fsMIY1731MepThVerifiedFrameSize This object specifies the Frame Size with which verified Throughput is achieved | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.131 |
| fsMIY1731MepAisOffload This object specifies the administrative MEP AIS Offloading status.
When value 'enabled' (1) is set, the AIS Offloading is enabled for the
MEP. When value 'disabled' (2) is set,… | column | Enumeration | .1.3.6.1.4.1.29601.2.7.1.2.4.1.132 |
| fsMIY1731MepLbmTTL This object specifies the time-to-live(TTL) value to be used in the
MPLS outer label header when loopback connectivity verification (ping)
or diagnostic tests has to be performe… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.133 |
| fsMIY1731MepLbmIcc This object specifies the ICC(ITU Carrier Code) of the MIP node in ICC
based MPLS-TP network for which loopback connectivity verification
(ping) or diagnostic tests has to be ini… | column | OctetString | .1.3.6.1.4.1.29601.2.7.1.2.4.1.134 |
| fsMIY1731MepLbmIfNum This object specifies the Interface Number of the specific MIP node in
MPLS-TP network for which loopback connectivity verification(ping) or
diagnostic tests has to be initiated… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.136 |
| fsMIY1731MepLoopbackStatus This object specifies the loopback status of the MEP. This object used
in Y1564/RFC2544 to put the remote end in loopback mode for looping
back all the data packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.137 |
| fsMIY1731MepTransmitLbmDestType This object specifies the Lbm Destination Type i.e. Unicast, MepID, Multicast
or MipId(MIP Id applicable only for MPLS-TP network). | column | FsY1731DestType | .1.3.6.1.4.1.29601.2.7.1.2.4.1.14 |
| fsMIY1731MepTransmitLbmMessages This object specifies the number of Loopback messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.15 |
| fsMIY1731MepTransmitLbmInterval This object specifies the Interval between two successive LBM transmissions to be used by the
MEP.
fsMIY1731MepTransmitLbmIntervalType are used as units for this object.
… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.16 |
| fsMIY1731MepTransmitLbmIntervalType This object specifies the Units of fsMIY1731MepTransmitLbmInterval to be used by the
MEP for LBM transmission. | column | FsY1731TimeIntervalType | .1.3.6.1.4.1.29601.2.7.1.2.4.1.17 |
| fsMIY1731MepTransmitLbmDeadline This object Specifies a timeout, in seconds, before loopback (ping) exits.
Loopback (ping) exits, if configured number of messages
fsMIY1731MepTransmitLbmMessages are sent before … | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.18 |
| fsMIY1731MepTransmitLbmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LBM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.19 |
| fsMIY1731MepOutOfService This object specifies a Boolean indicating the administrative service that is being or to be
performed.
true indicates operation needs to be performed Out-of-service
and false i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.2 |
| fsMIY1731MepTransmitLbmPriority This object is used to configure LBM Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority value to be… | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.20 |
| fsMIY1731MepTransmitLbmVariableBytes This object specifies a varying number of data bytes is to be transmitted in the
LBM.
'true' indicates that LBMs to be transmitted are with varying bytes
of data and 'false' i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.21 |
| fsMIY1731MepTransmitLbmTlvType This object specifies the type of the TLV to be included in the LBM frame, if
required to be send. | column | FsY1731TransmitLbmTlvTypeOrNone | .1.3.6.1.4.1.29601.2.7.1.2.4.1.22 |
| fsMIY1731MepTransmitLbmDataPattern This object specifies an arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent, determined by the
fsMIY1731MepTransmitLbmTlvType.
… | column | OctetString | .1.3.6.1.4.1.29601.2.7.1.2.4.1.23 |
| fsMIY1731MepTransmitLbmDataPatternSize This object specifies the size (bytes) of the
pattern(fsMIY1731MepTransmitLbmDataPatterm)
to be included in the Data TLV, if the Data TLV is to be included in the
LBM.
fsMIY1731… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.24 |
| fsMIY1731MepTransmitLbmTestPatternType This object specifies the type of pattern to be included in the test TLV of the LBM,
if the Test TLV is selected to be sent. | column | FsY1731TestTlvPatternType | .1.3.6.1.4.1.29601.2.7.1.2.4.1.25 |
| fsMIY1731MepTransmitLbmTestPatternSize This object specifies the size of the pattern to be included in the Test TLV,
if the Test TLV is selected to be sent.
Maximum frame size supported by ECFM is 9K,
fo… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.26 |
| fsMIY1731MepTransmitLbmSeqNumber This object specifies the sequence number to be transmitted in the next LBM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.27 |
| fsMIY1731MepBitErroredLbrIn This object specifies the number of bit-errored LBRs received.
LBR with different pattern as of Test TLV in the sent LBM is considered
as bit-errored LBR | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.28 |
| fsMIY1731MepTransmitLtmStatus This object specifies a Enumerated value set to 'transmit' to initiate LTM transmission.
'ready' and 'notReady' indicates whether LTM can be initiated or not.
Note… | column | Enumeration | .1.3.6.1.4.1.29601.2.7.1.2.4.1.29 |
| fsMIY1731MepRdiCapability This object specifies the administrative status of RDI Transmission capability.
This enables or disables the transmission of RDI bit in the CCM PDU by
the MEP.
If fsMIY1731MepRdi… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.3 |
| fsMIY1731MepTransmitLtmResultOK This object specifies the result of the operation:
- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.30 |
| fsMIY1731MepTransmitLtmFlags This object specifies the flags field for LTMs transmitted by the MEP. Indicates that only MAC
address learned in bridge's forwarding tables is to be used to forward
the LTM to th… | column | Bits | .1.3.6.1.4.1.29601.2.7.1.2.4.1.31 |
| fsMIY1731MepTransmitLtmTargetMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitL… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.32 |
| fsMIY1731MepTransmitLtmTargetMepId This object specifies an indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Asso… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.7.1.2.4.1.33 |
| fsMIY1731MepTransmitLtmTargetIsMepId This object specifies True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is use… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.34 |
| fsMIY1731MepTransmitLtmTtl This object specifies the LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each entity … | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.35 |
| fsMIY1731MepTransmitLtmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted LTM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.36 |
| fsMIY1731MepTransmitLtmPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LTM frame. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.37 |
| fsMIY1731MepTransmitLtmSeqNumber This object specifies the sequence number to be transmitted in next LBM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.38 |
| fsMIY1731MepTransmitLtmTimeout This object specifies the Time for all the replies (LTR) of a LTM to be received by
the MEP.No reply (LTR) would be entertained thereafter (timeout). | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.39 |
| fsMIY1731MepRdiPeriod This object specifies the Time (in seconds) for which RDI Capability (fsMIY1731MepRdiCapability)
is enabled. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.4 |
| fsMIY1731MepMulticastTstRecvCapability This object specifies the administrative status of multicast TST frame reception. This
enables or disables the capability of MEP to process the multicast TST.
A value of 'enabled… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.40 |
| fsMIY1731MepTransmitTstPatternType This object specifies the type of the pattern to be included in the test TLV of TST
frame. | column | FsY1731TestTlvPatternType | .1.3.6.1.4.1.29601.2.7.1.2.4.1.41 |
| fsMIY1731MepTransmitTstVariableBytes This object specifies a varying number of data bytes to send in the TST.
True indicates that TSTs are to be send with varying bytes of data and
False indicates that TST(s) are sen… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.42 |
| fsMIY1731MepTransmitTstPatternSize This object specifies the size of the pattern to be included in the Test TLV of
the TST message.
Maximum frame size supported by ECFM is 9K,
following is the calcu… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.43 |
| fsMIY1731MepTransmitTstDestType This object specifies the TST Destination Types (unicast,MEPID,Multicast) | column | FsY1731DestType | .1.3.6.1.4.1.29601.2.7.1.2.4.1.44 |
| fsMIY1731MepTransmitTstDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmi… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.45 |
| fsMIY1731MepTransmitTstDestMepId This object specifies the Maintenance Entity Group End Point Identifier of another
MEP in the same Maintenance Association to which the TST is
to be sent.
This address will be use… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.7.1.2.4.1.46 |
| fsMIY1731MepTransmitTstSeqNumber This object specifies the Sequence number to be sent in the TST message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.47 |
| fsMIY1731MepTransmitTstPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted TST frame. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.48 |
| fsMIY1731MepTransmitTstDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted TST frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.49 |
| fsMIY1731MepCcmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted CCM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.5 |
| fsMIY1731MepTransmitTstMessages This object specifies the number of Test messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.50 |
| fsMIY1731MepTransmitTstStatus This object specifies an Enumerated value set to 'start' to initiate TST transmission
and 'stop' to stop TST transmission.
'ready' and 'notReady' indicates whether TST can be ini… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.51 |
| fsMIY1731MepTransmitTstResultOK This object specifies the result of the operation:
- true The Test Message(s) will be
(or has been) sent.
- false The Test Message(s) will n… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.52 |
| fsMIY1731MepTransmitTstInterval This object specifies the Interval between two successive TST transmissions to be used by the
MEP.
fsMIY1731MepTransmitTstIntervalType is used as units for this object.
… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.53 |
| fsMIY1731MepTransmitTstIntervalType This object specifies the Units of fsMIY1731MepTransmitTstInterval to be used by the
MEP for TSTs transmission. | column | FsY1731TimeIntervalType | .1.3.6.1.4.1.29601.2.7.1.2.4.1.54 |
| fsMIY1731MepTransmitTstDeadline This object specifies the Specify a timeout(in seconds), before test exits. Test exits, if
configured number of messages are sent before timeout. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.55 |
| fsMIY1731MepBitErroredTstIn This object specifies the number of bit-errored TST messages received.
Reception of invalid TST message is considered as bit-errored TST
messages. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.56 |
| fsMIY1731MepValidTstIn This object specifies the Number of valid TST messages received. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.57 |
| fsMIY1731MepTstOut This object specifies the Number of TST messages transmitted. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.58 |
| fsMIY1731MepTransmitLmmStatus This object specifies an Enumerated value set to 'start' to initiate LM transmission
and 'stop' to stop LM transmission.
'ready' and 'notReady' indicates whether LM can be initia… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.59 |
| fsMIY1731MepCcmPriority This object is used to configure CCM Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority value to be… | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.6 |
| fsMIY1731MepTransmitLmmResultOK This object specifies the result of the operation:
- true The Loss measurement Message (LMM) will be (or has been) sent.
- false The Loss measur… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.60 |
| fsMIY1731MepTransmitLmmInterval This object specifies the Interval between two successive LMM transmissions to be used by the MEP. | column | FsY1731LmmInterval | .1.3.6.1.4.1.29601.2.7.1.2.4.1.61 |
| fsMIY1731MepTransmitLmmDeadline This object specifies a timeout, in seconds, before loss measurement exits.
Loss Measurement exits, if configured number of messages are sent
before timeout. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.62 |
| fsMIY1731MepTransmitLmmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.63 |
| fsMIY1731MepTransmitLmmPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.64 |
| fsMIY1731MepTransmitLmmDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for LMM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.65 |
| fsMIY1731MepTransmitLmmDestMepId This object specifies an indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Asso… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.7.1.2.4.1.66 |
| fsMIY1731MepTransmitLmmDestIsMepId This object specifies the True indicates that MEPID of the target MEP is used for
LM frame transmission.
False indicates that unicast destination MAC address of the
target MEP is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.67 |
| fsMIY1731MepTransmitLmmMessages This object specifies the number of LMM messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.68 |
| fsMIY1731MepTxFCf This object specifies the counter of in-profile data frames transmitted towards its
peer MEP transmitted in the last CCM or LMM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.69 |
| fsMIY1731MepMulticastLbmRecvCapability This object specifies the administrative status of Multicast LBM frame reception. This enables
or disables the capability of MEP to process the multicast LBM.
A va… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.7 |
| fsMIY1731MepRxFCb This object specifies the counter of in-profile data frames received from its peer MEP at the
time of receiving the last CCM frame. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.70 |
| fsMIY1731MepTxFCb This object specifies the value of fsMIY1731MepTxFCf field in the last CCM or LMR frame
received from its peer MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.71 |
| fsMIY1731MepNearEndFrameLossThreshold This object specifies the Threshold value for the near-end frame loss.
Notification is sent to Management Application if calculated near-end
frame loss exceeds configured thresho… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.72 |
| fsMIY1731MepFarEndFrameLossThreshold This object specifies the Threshold value for the far-end frame loss.
Notification is sent to Management Application if calculated far-end
frame loss exceeds configured threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.73 |
| fsMIY1731MepTransmitDmStatus This object specifies an Enumerated value set to 'start' to initiate 1DM or DMM transmission
and 'stop' to stop 1DM or DMM transmission.
'ready' and 'notReady' indicates whether … | column | FsY1731TransmitStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.74 |
| fsMIY1731MepTransmitDmResultOK This object specifies the Indicates the result of the operation:
- true The Delay measurement Message (1DM or DMM) will be
(or has been) sent.
- false… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.75 |
| fsMIY1731MepTransmitDmType This object specifies the Type of delay measurement to be initiated:
- oneWay(1) Measurement (by 1DM) is calculated at destination end.
- twoWay(2) Measurement … | column | Enumeration | .1.3.6.1.4.1.29601.2.7.1.2.4.1.76 |
| fsMIY1731MepTransmitDmInterval This object specifies the Interval between two successive DM messages
(1DM or DMM) transmissions to be used by the MEP. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.77 |
| fsMIY1731MepTransmitDmMessages This object specifies the number of DM (1DM or DMM) messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.78 |
| fsMIY1731MepTransmitDmmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted DMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.79 |
| fsMIY1731MepLoopbackCapability This object specifies the administrative status of Loopback (ping) capability.
This enables or disables capability of MEP to initiate and process
Loopback (ping) operation.
A v… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.8 |
| fsMIY1731MepTransmit1DmDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.80 |
| fsMIY1731MepTransmitDmmPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted DMM frame. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.81 |
| fsMIY1731MepTransmit1DmPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame. | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.82 |
| fsMIY1731MepTransmitDmDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for 1DM or DMM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.83 |
| fsMIY1731MepTransmitDmDestMepId This object specifies an indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Asso… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.7.1.2.4.1.84 |
| fsMIY1731MepTransmitDmDestIsMepId This object when True indicates that MEPID of the target MEP is used for
Delay frame transmission.
False indicates that unicast destination MAC address of the
targe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.85 |
| fsMIY1731MepTransmitDmDeadline This object specifies a timeout, in seconds, before Delay Measurement operation exits.
Delay Measurement operation exits, if configured number of messages are
sent before timeout. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.86 |
| fsMIY1731MepDmrOptionalFields This object specifies whether to include optional fields in the DMR Frame or not.
True indicates optional fields are to be included and False indicates
optional fields are not in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.87 |
| fsMIY1731Mep1DmRecvCapability This object specifies the administrative status of 1DM Frame reception. This enables
or disables the capability of MEP to process the 1DM Frames.
A value of 'enabled' (1) indica… | column | Enumeration | .1.3.6.1.4.1.29601.2.7.1.2.4.1.88 |
| fsMIY1731MepFrameDelayThreshold This object specifies the Threshold (in microseconds) for the Frame delay.
Notification is sent to Management application if calculated frame delay
exceeds configured threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.89 |
| fsMIY1731MepLbmCurrentTransId This object specifies the current LBM Transaction. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.9 |
| fsMIY1731MepAisCapability This object specifies the administrative status of AIS capability.This enables or disables
transmission of AIS frames.
A value of 'enabled' (1) indicates AIS fr… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.29601.2.7.1.2.4.1.90 |
| fsMIY1731MepAisCondition This object specifies the MEP is in AIS condition.
AIS condition occurs when it receives an AIS frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.91 |
| fsMIY1731MepAisInterval This object specifies the Interval between two successive AIS transmissions. | column | FsY1731AisLckInterval | .1.3.6.1.4.1.29601.2.7.1.2.4.1.92 |
| fsMIY1731MepAisPeriod This object specifies the Time (in seconds) for which AIS Capability (fsMIY1731MepAisCapability)
is enabled. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.93 |
| fsMIY1731MepAisPriority This object is used for configuring AIS Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority value to… | column | Integer32 | .1.3.6.1.4.1.29601.2.7.1.2.4.1.94 |
| fsMIY1731MepAisDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted AIS frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.95 |
| fsMIY1731MepAisDestIsMulticast This object specifies an Enumerated value set to indicate the type of AIS transmission,
unicast or multicast.
'true' indicates that AIS(s) are to be transmitted as multicast,
'fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.96 |
| fsMIY1731MepAisClientMacAddress This object specifies a unicast destination MAC address of the Client MEP to which AIS frame
is to send.
This object is not supported on MEPs created over MPLS-TP n… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.97 |
| fsMIY1731MepLckDestIsMulticast This object specifies an Enumerated value set to indicate the type of LCK transmission,
unicast or multicast.
'true' indicates that LCK signals are to be transmitted as multicast… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.4.1.98 |
| fsMIY1731MepLckClientMacAddress This object specifies a unicast destination MAC address of the Client MEP to which AIS frame
is to send. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.4.1.99 |