fsMIY1731MepAvailabilityStatus
ARICENT-ECFM-Y1731-MI-MIB ·
.1.3.6.1.4.1.29601.2.7.1.2.16.1.1
Object
column
r/w
FsY1731TransmitStatus
This object specifies an Enumerated value set to 'start' to initiate Avilability Measurement
and 'stop' to stop Availability Measurement.
'ready' and 'notReady' indicates whether Availability Measurement
can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
Context
- MIB
- ARICENT-ECFM-Y1731-MI-MIB
- OID
.1.3.6.1.4.1.29601.2.7.1.2.16.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIY1731MepAvailabilityEntry
- Table
- fsMIY1731MepAvailabilityTable
- Siblings
- 17
Syntax
FsY1731TransmitStatus
- Source
- FsY1731TransmitStatus
- Base type
Enumeration
Values & Constraints
Type Values
0 | ready |
1 | notReady |
2 | start |
3 | stop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIY1731MepAvailabilityDestMepId This object specifies an indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Asso… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.7.1.2.16.1.10 |
| fsMIY1731MepAvailabilityDestIsMepId This object when True indicates that MEPID of the target MEP is used for
LMM transmission during Availability Measurement.
False indicates that unicast destination MAC address of … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.16.1.11 |
| fsMIY1731MepAvailabilityType This object specifies the defStatic indicates that the algorithm for Availability Measurement
is static window algorithm. The availability measurement will be
conducted as per ME… | column | FsY1731AvailabilityType | .1.3.6.1.4.1.29601.2.7.1.2.16.1.12 |
| fsMIY1731MepAvailabilitySchldDownInitTime This object specifies the Time when Scheduled down time is initiated, denotes the beginning of
time interval agreed upon by both the Subscriber and Service Provider
during which… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.16.1.13 |
| fsMIY1731MepAvailabilitySchldDownEndTime This object specifies the Time when Scheduled down time is ending, denotes the ending of
time interval agreed upon by both the Subscriber and Service Provider
during which a servi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.16.1.14 |
| fsMIY1731MepAvailabilityPriority This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.16.1.15 |
| fsMIY1731MepAvailabilityDropEnable This object specifies the Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.16.1.16 |
| fsMIY1731MepAvailabilityPercentage This object specifies the percentage of Availability
If fsMIY1731MepAvailabilityType is selected as defStatic,
this object contains the Availability Performance met… | column | OctetString | .1.3.6.1.4.1.29601.2.7.1.2.16.1.17 |
| fsMIY1731MepAvailabilityRowStatus This object specifies the status of MEP Availability Table row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.7.1.2.16.1.18 |
| fsMIY1731MepAvailabilityResultOK This object specifies the result of the operation:
- true Initiating Availability measurement by sending
LM Message (LMM) is successful.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.16.1.2 |
| fsMIY1731MepAvailabilityInterval This object specifies a time interval much smaller than Deadline,
Interval between two successive LMM transmissions to be used by the MEP
for calculating Availability. | column | FsY1731AvailabilityInterval | .1.3.6.1.4.1.29601.2.7.1.2.16.1.3 |
| fsMIY1731MepAvailabilityDeadline This object specifies a timeout, in seconds, the Time interval to conduct
the availability functionality | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.16.1.4 |
| fsMIY1731MepAvailabilityLowerThreshold This object specifies the Availability frame loss ratio threshold, the lower threshold used to define
an interval as available. If far-end loss ratio is lesser than
configured l… | column | OctetString | .1.3.6.1.4.1.29601.2.7.1.2.16.1.5 |
| fsMIY1731MepAvailabilityUpperThreshold This object specifies the Unavailability frame loss ratio threshold, the upper threshold to define
an interval as unavailable. If far-end loss ratio is greater than
configured up… | column | OctetString | .1.3.6.1.4.1.29601.2.7.1.2.16.1.6 |
| fsMIY1731MepAvailabilityModestAreaIsAvailable This object specifies whether the area between upper and lower
threshold is referred as available or unavailable.
True - If Calculated Frame loss ration falls
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.7.1.2.16.1.7 |
| fsMIY1731MepAvailabilityWindowSize This object specifies the Number of consecutive small time intervals for assessing availability | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.7.1.2.16.1.8 |
| fsMIY1731MepAvailabilityDestMacAddress This object specifies the Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for Availability Measurement. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.7.1.2.16.1.9 |