fsEcfmLtrCacheStatus
ARICENT-ECFM-MIB ·
.1.3.6.1.4.1.2076.150.1.5
Object
scalar
r/w
Enumeration
The administrative status of LTR cache. This enables or disables caching of CFM data learned through trace route messages.
Context
- MIB
- ARICENT-ECFM-MIB
- OID
.1.3.6.1.4.1.2076.150.1.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsEcfmSystem
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsEcfmSystemControl The administrative system control status of Ethernet
CFM module. The value 'start' (1) indicates that all
resources required by ECFM module should be allocated
and ECFM should be… | scalar | Enumeration | .1.3.6.1.4.1.2076.150.1.1 |
| fsEcfmMipCcmDbStatus The administrative status of MIP CCM DB.
This enables or disables caching of data learned through CCM
messages | scalar | Enumeration | .1.3.6.1.4.1.2076.150.1.10 |
| fsEcfmMipCcmDbClear Indicates if the contents of MIP CCM DB are to be removed.
If set to true, then entries in trace route cache are removed,
and if set to false, the entries in the trace route are … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.150.1.11 |
| fsEcfmMipCcmDbSize Identifies the maximum number of entries for the MIP CCM DB table,
only if fsEcfmMipDbStatus is enabled. | scalar | Integer32 | .1.3.6.1.4.1.2076.150.1.12 |
| fsEcfmMipCcmDbHoldTime Identifies the time in hours for which MIP CCM DB table entries
are retained. | scalar | Integer32 | .1.3.6.1.4.1.2076.150.1.13 |
| fsEcfmMemoryFailureCount Identifies the number of memory allocation failures. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.14 |
| fsEcfmBufferFailureCount Identifies the number of buffer allocation failures. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.15 |
| fsEcfmUpCount Identifies the number of times module was enabled. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.16 |
| fsEcfmDownCount Identifies the number of times module was disabled. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.17 |
| fsEcfmNoDftCount Identifies the number of times no defect occurred in any MEP. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.18 |
| fsEcfmRdiDftCount Identifies the number of times RDI defect occurred in any MEP. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.19 |
| fsEcfmModuleStatus The administrative module status of Ethernet CFM module.
This enables or disables ECFM in the system. A value of
'enabled' (1) indicates that ECFM is enabled in the device.
A va… | scalar | Enumeration | .1.3.6.1.4.1.2076.150.1.2 |
| fsEcfmMacStatusDftCount Identifies the number of times MAC status defect occurred in any MEP. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.20 |
| fsEcfmRemoteCcmDftCount Identifies the number of times remote CCM defect occurred in any MEP. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.21 |
| fsEcfmErrorCcmDftCount Identifies the number of times error CCM defect occurred in any MEP. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.22 |
| fsEcfmXconDftCount Identifies the number of times Xconn defect occurred in any MEP
filtering rules. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.150.1.23 |
| fsEcfmCrosscheckDelay To configure the number of CCMs to be missed, for which a device waits for the
remote maintenance end points(MEPs) to come up. If the user has not configured then we will use stan… | scalar | Integer32 | .1.3.6.1.4.1.2076.150.1.24 |
| fsEcfmMipDynamicEvaluationStatus This enables or disables the implicit evaluation and creation of MIPs
is purged. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.150.1.25 |
| fsEcfmMipTable The Maintenance Intermediate Point (MIP) table.
Each row in the table represents a different MIP.
A MIP consists two MIP Half Functions (MHFs) on a
single bridge port… | table | - | .1.3.6.1.4.1.2076.150.1.26 |
| fsEcfmMipCcmDbTable It is a list of every distinct {FID, source_address,
InterfaceIndex} triple from all of the CCMs presented
to all of the bridge's MIPs. Continuity Check Receivers
since the bridg… | table | - | .1.3.6.1.4.1.2076.150.1.27 |
| fsEcfmGlobalCcmOffload The administrative Global CCMOffloading status.
when value 'enable' (1) is set, then CCMOffloading will start for all the
MEPs in the system and will overwrite the per MEP offload… | scalar | Enumeration | .1.3.6.1.4.1.2076.150.1.28 |
| fsEcfmDynMipPreventionTable The Dynamic Maintenance Intermediate Point (MIP) Prevention table.
An entry in this table will restrict the automatic creation of
MIPs for the corresponding index (IfIndex, MD Le… | table | - | .1.3.6.1.4.1.2076.150.1.29 |
| fsEcfmOui The Organizational Unique Identifier of the local ECFM
Client. This will be sent in the Information CFMPDU in
Local Information TLV.
Default for this object will be the first th… | scalar | FsEcfmOuiType | .1.3.6.1.4.1.2076.150.1.3 |
| fsEcfmTraceOption This object is used to enable trace statements in
Ethernet CFM module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.150.1.4 |
| fsEcfmLtrCacheClear Indicates if the contents of trace route cache are to be removed.
If set to true then entries in trace route cache are removed,
and if set to false, the entries in trace route ca… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.150.1.6 |
| fsEcfmLtrCacheHoldTime Identifies the time in minutes for which CFM trace route cache entries
are retained. | scalar | Integer32 | .1.3.6.1.4.1.2076.150.1.7 |
| fsEcfmLtrCacheSize Identifies the maximum number of entries for the CFM trace route cache table,
only if fsEcfmLtrCacheStatus is enabled. | scalar | Integer32 | .1.3.6.1.4.1.2076.150.1.8 |
| fsEcfmPortTable List of port related parameters for ECFM module. | table | - | .1.3.6.1.4.1.2076.150.1.9 |