fsMIEcfmMepLowPrDef
ARICENT-ECFM-MI-MIB ·
.1.3.6.1.4.1.2076.160.1.0.7.1.10
Object
column
r/w
FsMIEcfmLowestAlarmPri
An integer value specifying the lowest priority defect that is allowed to generate fault alarm.
Context
- MIB
- ARICENT-ECFM-MI-MIB
- OID
.1.3.6.1.4.1.2076.160.1.0.7.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIEcfmMepEntry
- Table
- fsMIEcfmMepTable
- Siblings
- 45
Syntax
FsMIEcfmLowestAlarmPri
- Source
- FsMIEcfmLowestAlarmPri
- Base type
Enumeration
Values & Constraints
Type Values
1 | allDef |
2 | macRemErrXcon |
3 | remErrXcon |
4 | errXcon |
5 | xcon |
6 | noXcon |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIEcfmMepIdentifier Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
ass… | column | FsMIEcfmMepId | .1.3.6.1.4.1.2076.160.1.0.7.1.1 |
| fsMIEcfmMepFngAlarmTime The time that defects must be present before a Fault Alarm is
issued (fngAlarmTime. 20.33.3) (default 2.5s). | column | Integer32 | .1.3.6.1.4.1.2076.160.1.0.7.1.11 |
| fsMIEcfmMepFngResetTime The time that defects must be absent before re-enabling a
Fault Alarm (fngResetTime, 20.33.4) (default 10s). | column | Integer32 | .1.3.6.1.4.1.2076.160.1.0.7.1.12 |
| fsMIEcfmMepHighestPrDefect The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state. | column | FsMIEcfmHighestDefectPri | .1.3.6.1.4.1.2076.160.1.0.7.1.13 |
| fsMIEcfmMepDefects A vector of Boolean error conditions from Table 20-1, any of
which may be true:
DefRDICCM(1)
DefMACstatus(2)
DefRemoteCCM(3)
DefErrorCCM(4)
DefXconCCM(5) | column | FsMIEcfmMepDefects | .1.3.6.1.4.1.2076.160.1.0.7.1.14 |
| fsMIEcfmMepErrorCcmLastFailure The last-received CCM that triggered an DefErrorCCM fault. | column | OctetString | .1.3.6.1.4.1.2076.160.1.0.7.1.15 |
| fsMIEcfmMepXconCcmLastFailure The last-received CCM that triggered a DefXconCCM fault. | column | OctetString | .1.3.6.1.4.1.2076.160.1.0.7.1.16 |
| fsMIEcfmMepCcmSequenceErrors The total number of out-of-sequence CCMs received from all
remote MEPs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.17 |
| fsMIEcfmMepCciSentCcms Total number of Continuity Check messages transmitted. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.18 |
| fsMIEcfmMepNextLbmTransId Next sequence number/transaction identifier to be sent in a
Loopback message. This sequence number can be zero because
it wraps around. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.19 |
| fsMIEcfmMepIfIndex This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.
Upon … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2076.160.1.0.7.1.2 |
| fsMIEcfmMepLbrIn Total number of valid, in-order Loopback Replies received. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.20 |
| fsMIEcfmMepLbrInOutOfOrder The total number of valid, out-of-order Loopback Replies
received. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.21 |
| fsMIEcfmMepLbrBadMsdu (optional) The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM (20.2.3). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.22 |
| fsMIEcfmMepLtmNextSeqNumber Next transaction identifier/sequence number to be sent in a
Linktrace message. This sequence number can be zero because
it wraps around. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.23 |
| fsMIEcfmMepUnexpLtrIn The total number of unexpected LTRs received (20.39.1). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.24 |
| fsMIEcfmMepLbrOut Total number of Loopback Replies transmitted. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.25 |
| fsMIEcfmMepTransmitLbmStatus A Enumerated value set to 'transmit'to initiate LBM transmission.
Set to 'ready' or 'notReady' by the MEP Loopback Initiator State Machine. | column | FsMIEcfmTransmitStatus | .1.3.6.1.4.1.2076.160.1.0.7.1.26 |
| fsMIEcfmMepTransmitLbmDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIEcfmMepTransmitLbmDestIsMepId is 'false… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2076.160.1.0.7.1.27 |
| fsMIEcfmMepTransmitLbmDestMepId The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the c… | column | FsMIEcfmMepIdOrZero | .1.3.6.1.4.1.2076.160.1.0.7.1.28 |
| fsMIEcfmMepTransmitLbmDestIsMepId True indicates that MEPID of the target MEP is used for
Loopback transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmis… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.160.1.0.7.1.29 |
| fsMIEcfmMepDirection The direction in which the MEP faces on the Bridge port. | column | FsMIEcfmMpDirection | .1.3.6.1.4.1.2076.160.1.0.7.1.3 |
| fsMIEcfmMepTransmitLbmMessages The number of Loopback messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.2076.160.1.0.7.1.30 |
| fsMIEcfmMepTransmitLbmDataTlv An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent. | column | OctetString | .1.3.6.1.4.1.2076.160.1.0.7.1.31 |
| fsMIEcfmMepTransmitLbmVlanPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
The default value is CCM priority. | column | Integer32 | .1.3.6.1.4.1.2076.160.1.0.7.1.32 |
| fsMIEcfmMepTransmitLbmVlanDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.
For more information about VLAN Drop Enable, please check
IEEE 802.1ad. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.160.1.0.7.1.33 |
| fsMIEcfmMepTransmitLbmResultOK Indicates the result of the operation:
- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.160.1.0.7.1.34 |
| fsMIEcfmMepTransmitLbmSeqNumber The Loopback Transaction Identifier
(fsMIEcfmMepNextLbmTransId) of the first LBM (to be) sent.
The value returned is undefined if
fsMIEcfmMepTransmitLbmResultOK is false. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.35 |
| fsMIEcfmMepTransmitLtmStatus A Enumerated value set to 'transmit' to initiate LTM transmission.
Set to 'ready' or 'notReady' by the MEP Linktrace Initiator State
Machine. | column | FsMIEcfmTransmitStatus | .1.3.6.1.4.1.2076.160.1.0.7.1.36 |
| fsMIEcfmMepTransmitLtmFlags The flags field for LTMs transmitted by the MEP. | column | Bits | .1.3.6.1.4.1.2076.160.1.0.7.1.37 |
| fsMIEcfmMepTransmitLtmTargetMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIEcfmMepTransmitLtmTargetIsMepId is 'fal… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2076.160.1.0.7.1.38 |
| fsMIEcfmMepTransmitLtmTargetMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | FsMIEcfmMepIdOrZero | .1.3.6.1.4.1.2076.160.1.0.7.1.39 |
| fsMIEcfmMepPrimaryVid An integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or t… | column | Unsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.4 |
| fsMIEcfmMepTransmitLtmTargetIsMepId True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.160.1.0.7.1.40 |
| fsMIEcfmMepTransmitLtmTtl The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each Linktrace Responder that
hand… | column | Unsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.41 |
| fsMIEcfmMepTransmitLtmResult Indicates the result of the operation:
- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.160.1.0.7.1.42 |
| fsMIEcfmMepTransmitLtmSeqNumber The LTM Transaction Identifier
(fsMIEcfmMepLtmNextSeqNumber) of the LTM sent.
The value returned is undefined if
fsMIEcfmMepTransmitLtmResult is false. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.43 |
| fsMIEcfmMepTransmitLtmEgressIdentifier Identifies the MEP Linktrace Initiator that is originating,
or the Linktrace Responder that is forwarding, this LTM.
The low-order six octets contain a 48-bit IEEE MAC address
uni… | column | OctetString | .1.3.6.1.4.1.2076.160.1.0.7.1.44 |
| fsMIEcfmMepRowStatus The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.160.1.0.7.1.45 |
| fsMIEcfmMepCcmOffload The administrative MEP CCMOffloading status.
when value 'enabled' (1) is set The CCM Offloading starts for
the MEP in the system.when value 'disabled' (2) is set then
CCMOffload… | column | Enumeration | .1.3.6.1.4.1.2076.160.1.0.7.1.46 |
| fsMIEcfmMepActive Administrative state of the MEP
A Boolean indicating the administrative state of the MEP.
True indicates that the MEP is to function normally, and
fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.160.1.0.7.1.5 |
| fsMIEcfmMepFngState Current state of the MEP Fault Notification Generator
State Machine. | column | FsMIEcfmFngState | .1.3.6.1.4.1.2076.160.1.0.7.1.6 |
| fsMIEcfmMepCciEnabled If set to true, the MEP will generate CCM messages. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.160.1.0.7.1.7 |
| fsMIEcfmMepCcmLtmPriority The priority value for CCMs and LTMs transmitted by the MEP.
Default Value in the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The man… | column | Unsigned32 | .1.3.6.1.4.1.2076.160.1.0.7.1.8 |
| fsMIEcfmMepMacAddress MAC address of the MEP. For MEPs that do not possess a MAC address
this value will be all zeros. Such a MEP will be present in the
MPLS TP transport networks. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2076.160.1.0.7.1.9 |