fsDot11ACCurrentChannelBandwidth
ARICENT-DOT11AC-MIB ·
.1.3.6.1.4.1.29601.2.100.1.1.1.12
Object
column
r/w
Enumeration
This object specifies the operating channel width.
Context
- MIB
- ARICENT-DOT11AC-MIB
- OID
.1.3.6.1.4.1.29601.2.100.1.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsDot11ACConfigEntry
- Table
- fsDot11ACConfigTable
- Siblings
- 43
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | cbw20 |
1 | cbw40 |
2 | cbw80 |
3 | cbw160 |
4 | cbw80p80 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsDot11ACMaxMPDULength This object specifies the supported maximum MPDU size, and
is determined by device capabilities. | column | Enumeration | .1.3.6.1.4.1.29601.2.100.1.1.1.1 |
| fsDot11ACVHTTxHighestDataRateSupported This object specifies the highest data rate in Mb/s
that the STA is capable of transmitting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.10 |
| fsDot11ACVHTOBSSScanCount This object specifies the minimum number of scan operations performed on
a channel to detect another OBSS. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.11 |
| fsDot11ACCurrentChannelBandwidthConfig This object specifies the operating channel width and its
value that can be less than or equal to the status variable
(fsDot11ACCurrentChannelBandwidth) | column | Enumeration | .1.3.6.1.4.1.29601.2.100.1.1.1.13 |
| fsDot11ACCurrentChannelCenterFrequencyIndex0 This object specifies the channel center frequency such as
20 MHz, 40 MHz, 80 MHz or 160 MHz channel(Ed) where an
80+80 MHz channel(Ed), denotes the center frequency of frequency
… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.14 |
| fsDot11ACCurrentChannelCenterFrequencyIndex0Config This object specifies the channel
center frequency such as 20 MHz, 40 MHz, 80 MHz or 160
MHz channel(Ed), where an 80+80 MHz channel(Ed), denotes
the center frequency of frequency… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.15 |
| fsDot11ACCurrentChannelCenterFrequencyIndex1 This object specifies the channel
center frequency such as 20 MHz, 40 MHz, 80 MHz or 160
MHz channel(Ed), where an 80+80 MHz channel(Ed), denotes
the center frequency of frequency… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.16 |
| fsDot11ACVHTShortGIOptionIn80Implemented This object specifies that the device is capable of receiving
80 MHz short guard interval packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.17 |
| fsDot11ACVHTShortGIOptionIn80Activated This object specifies that the reception of 80 MHz short
guard interval packets is enabled. Changes
made while associated with an AP or while operating a BSS should
take effect on… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.18 |
| fsDot11ACVHTShortGIOptionIn160and80p80Implemented This object specifies that the device is capable of receiving
160 MHz and 80+80 MHz short guard interval packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.19 |
| fsDot11ACMaxMPDULengthConfig This object specifies the supported maximum MPDU size
and its maximum value can only be less than or equal to
device capability(fsDot11ACMaxMPDULength). | column | Enumeration | .1.3.6.1.4.1.29601.2.100.1.1.1.2 |
| fsDot11ACVHTShortGIOptionIn160and80p80Activated This object specifies that the reception of 160 MHz and
80+80 MHz short guard interval packets is enabled.
Changes take effect as soon as practical in the implementation. Change… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.20 |
| fsDot11ACVHTLDPCCodingOptionImplemented This object specifies that the LDPC coding option for VHT
packets is implemented. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.21 |
| fsDot11ACVHTLDPCCodingOptionActivated This object specifies that the LDPC coding option for VHT
packets is enabled.
Changes take effect as soon as practical in the implementation. Changes
made while associated with … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.22 |
| fsDot11ACVHTTxSTBCOptionImplemented This object specifies that the device is capable of transmitting
VHT PPDUs using STBC. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.23 |
| fsDot11ACVHTTxSTBCOptionActivated This object specifies that the entity's capability for
transmitting VHT PPDUs using STBC is enabled.
Changes take effect as soon as practical in the implementation. Changes
ma… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.24 |
| fsDot11ACVHTRxSTBCOptionImplemented This object specifies that the device is capable of receiving
VHT PPDUs using STBC. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.25 |
| fsDot11ACVHTRxSTBCOptionActivated This object specifies that the entity's capability for
receiving VHT PPDUs using STBC is enabled.
Changes take effect as soon as practical in the implementation. Changes
made … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.26 |
| fsDot11ACVHTMUMaxUsersImplemented This object specifies the maximum number of users to which the device
is capable of transmitting within a MU PPDU. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.27 |
| fsDot11ACVHTMUMaxNSTSPerUserImplemented This object specifies the maximum number of space-time streams per user
that the device is capable of transmitting within a MU PPDU. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.28 |
| fsDot11ACVHTMUMaxNSTSTotalImplemented This object specifies the maximum number of space-time streams for all
users that the device is capable of transmitting within a MU DU. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.29 |
| fsDot11ACVHTMaxRxAMPDUFactor This object specifies the maximum length of A-MPDU that the STA can
receive. The Maximum Rx A-MPDU defined by this field is equal to
2^(13+fsDot11ACVHTMaxRxAMPDUFactor) -1 octets. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.3 |
| fsDot11ACSuBeamFormer This object specifies the support for operation
as an SU beamformer where the value is set to
0 if not supported or is set to 1 if supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.100.1.1.1.30 |
| fsDot11ACSuBeamFormee This object specifies the support for operation
as an SU beamformee where the value is set to
0 if not supported or is set to 1 if supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.100.1.1.1.31 |
| fsDot11ACMuBeamFormer This object specifies the support for operation
as an MU beamformer where the value is
set to 0 if not supported or if SU Beamformer Capable
or if sent by a non-AP STA
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.100.1.1.1.32 |
| fsDot11ACMuBeamFormee This object specifies the support for operation
as an MU beamformee where the value is
set to 0 if not supported or if SU Beamformee Capable
or if sent by an AP
or is s… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.100.1.1.1.33 |
| fsDot11ACVHTLinkAdaption This object specifies whether or not the
STA supports link adaptation using VHT variant HT Control
field. If +HTC-VHT Capable is 1:
Set to 0 (No Feedback) if the STA does not
prov… | column | Integer32 | .1.3.6.1.4.1.29601.2.100.1.1.1.34 |
| fsDot11ACRxAntennaPattern This object specifies the possibility of Rx
antenna pattern change where the value is set
to 0 if Rx antenna pattern might change
during the lifetime of the current association.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.100.1.1.1.35 |
| fsDot11ACTxAntennaPattern This object specifies the possibility of Tx
antenna pattern change where the value is set
to 0 if Rx antenna pattern might change
during the lifetime of the current association.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.100.1.1.1.36 |
| fsDot11ACBasicMCSMap This object specifies the MCSs for each number of spatial
streams in VHT PPDUs that
are supported by all VHT STAs in the BSS (including IBSS and MBSS).
It is a bitmap of size 16 … | column | OctetString | .1.3.6.1.4.1.29601.2.100.1.1.1.37 |
| fsDot11ACVHTRxMCSMapConfig This object specifies the Rx MCS Map that is to be configured
to the access point from the controller.
Its value depends on the capability variable(fsDot11ACVHTRxMCSMap).
Each oct… | column | OctetString | .1.3.6.1.4.1.29601.2.100.1.1.1.38 |
| fsDot11ACVHTTxMCSMapConfig This object specifies the Tx MCS Map that is to be configured
to the access point from the controller.
Its value depends on the capability variable(fsDot11ACVHTTxMCSMap).
Each oct… | column | OctetString | .1.3.6.1.4.1.29601.2.100.1.1.1.39 |
| fsDot11ACVHTMaxRxAMPDUFactorConfig This object specifies the maximum length of A-MPDU that the STA can
receive. The Maximum Rx A-MPDU defined by this field is equal to
2^(13+fsDot11ACVHTMaxRxAMPDUFactorConfig) -1 o… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.4 |
| fsDot11ACCurrentChannelCenterFrequencyIndex1Config This object specifies the channel
center frequency such as 20 MHz, 40 MHz, 80 MHz or 160
MHz channel(Ed), where an 80+80 MHz channel(Ed),
denotes the center frequency of frequency… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.40 |
| fsDot11VHTOptionImplemented This object indicates whether the entity is VHT capable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.41 |
| fsDot11OperatingModeNotificationImplemented This object indicates whether the entity is
Operating Mode Notification capable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.42 |
| fsDot11ExtendedChannelSwitchActivated This object when true, indicates that the station implementation is
capable of supporting Extended Channel Switch Announcement. The capability
is disabled, otherwise. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.43 |
| fsDot11FragmentationThreshold This object specifies the current maximum size of the MPDU (in octets)
that may be delivered to the security encapsulation. This maximum size
does not apply when an MSDU is tran… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.44 |
| fsDot11ACVHTControlFieldSupported This object specifies that the station implementation is
capable of receiving the VHT variant HT Control field. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.5 |
| fsDot11ACVHTTXOPPowerSaveOptionImplemented This object specifies that the station implementation is
capable of TXOP Power Save operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.100.1.1.1.6 |
| fsDot11ACVHTRxMCSMap This object specifies the highest MCS supported (for Rx) on the number of
streams represented by the octet position (first octet represents 1
stream, second octet represents 2 str… | column | OctetString | .1.3.6.1.4.1.29601.2.100.1.1.1.7 |
| fsDot11ACVHTRxHighestDataRateSupported This object specifies the highest data rate in Mb/s
that the STA is capable of receiving. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.100.1.1.1.8 |
| fsDot11ACVHTTxMCSMap This object specifies the highest MCS supported (for Tx) on the number of
streams represented by the octet position (first octet represents 1
stream, second octet represents 2 str… | column | OctetString | .1.3.6.1.4.1.29601.2.100.1.1.1.9 |