fsQoSStatus
ARICENT-DIFFSERV-MIB ·
.1.3.6.1.4.1.29601.2.6.1.1.2
Object
scalar
r/w
Enumeration
Enables or Disables QoS Module in the system. When set as 'enabled', QoS module programs the hardware and starts Protocol Operation. When set as 'disabled', it stops protocol operation by deleting the hardware configuration. If any mib table supports global configurations (less-specific) at runtime and H/W supports more-specific configurations, then appropriate behaviour may take effect in H/W only after next status change of this object.
Context
- MIB
- ARICENT-DIFFSERV-MIB
- OID
.1.3.6.1.4.1.29601.2.6.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsQoSSystem
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsQoSSystemControl Starts or shutdowns QoS Module in the system.
When set as 'start',resources required by QoS module are
allocated & QoS module starts running.
When shutdown, all the pools used by … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.1 |
| fsQoSEgressExpMapProfileTable This object specifies the table containing Egress MPLS Profile Table.
Currently table will store the internal Priority to Experimental value.
When this profile is mapped to an int… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.10 |
| fsQoSProfileMappingTable This object specifies the table that associates Dot1P or EXP ingress
and egress profiles on an interface.
When profiles are attached to a sub-interface, then the attachment will … | table | - | .1.3.6.1.4.1.29601.2.6.1.1.11 |
| fsQoSEgressExpDot1pMapProfileTable This object specifies the table containing Egress MPLS Profile Table.
Currently table will store the internal Priority to Experimental and DOT1P
value. When this profile is mapped… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.12 |
| fsQoSIngressDscpProfileTable This object specifies the table containing Ingress Dscp Profile Table.
Currently table will store the default DSCP Packet priority to
internal Priority.
Default Mapping Table
DSCP… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.13 |
| fsQoSIngressDscpMapProfileTable This object specifies the table containing Ingress Dscp Profile Table.
Currently table will store the user specified DSCP Packet priority to internal Priority.
Currently this Prof… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.14 |
| fsQoSTrcFlag This object is used to enable trace statements in QoS module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particula… | scalar | Unsigned32 | .1.3.6.1.4.1.29601.2.6.1.1.3 |
| fsQoSRateUnit This Object indicates the unit for the
Information Rate(CIR,PIR,PIR,PTR,CTR ...)values
based on target platform.
This Object specifies the unit alone. Value corresponding
to … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.4 |
| fsQoSRateGranularity This Object indicates the acceptable Granularity level
for configuring the Information Rate(CIR,PIR,PIR,PTR,
CTR ...)values for a target platform.
This Object specifies the Integ… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.6.1.1.5 |
| fsQoSVlanQueueingStatus This object is used to enable or disable Vlan Based Queueing
in the system. When set as 'enabled', QoS module programs the
hardware with the Hierarchical Scheduling Schema for Vl… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.9 |
| fsQoSIngressDot1pMapProfileTable This object specifies the table containing Ingress Dot1.p Profile Table.
Currently table will store the Dot1.p Packet priority to internal Priority.
Default mapping is given below… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.7 |
| fsQoSEgressDot1pMapProfileTable This object specifies the table containing Egress Dot1.p Profile Table.
Currently table will store the internal Priority to Dot1.p.
Default mapping is given below.
Internal Priori… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.8 |
| fsQoSIngressExpMapProfileTable This object specifies the table containing Ingress Experimental Profile Table.
Currently table will store the Experimental priority to internal Priority.
When this profile is mapp… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.9 |