fsQoSProfileMappingTable
ARICENT-DIFFSERV-MIB ·
.1.3.6.1.4.1.29601.2.6.1.1.11
Object
table
This object specifies the table that associates Dot1P or EXP ingress and egress profiles on an interface. When profiles are attached to a sub-interface, then the attachment will have effect only for that sub-interface and its associated VLAN combination (PORT+VLAN). On an interface if both port based profile as well as PORT+VLAN based profiles are attached, the preference will be given for PORT+VLAN based profiles.
Context
- MIB
- ARICENT-DIFFSERV-MIB
- OID
.1.3.6.1.4.1.29601.2.6.1.1.11- Type
- table
- Status
- current
- Parent
- fsQoSSystem
- Siblings
- 13
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsQoSSystemControl Starts or shutdowns QoS Module in the system.
When set as 'start',resources required by QoS module are
allocated & QoS module starts running.
When shutdown, all the pools used by … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.1 |
| fsQoSEgressExpMapProfileTable This object specifies the table containing Egress MPLS Profile Table.
Currently table will store the internal Priority to Experimental value.
When this profile is mapped to an int… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.10 |
| fsQoSEgressExpDot1pMapProfileTable This object specifies the table containing Egress MPLS Profile Table.
Currently table will store the internal Priority to Experimental and DOT1P
value. When this profile is mapped… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.12 |
| fsQoSIngressDscpProfileTable This object specifies the table containing Ingress Dscp Profile Table.
Currently table will store the default DSCP Packet priority to
internal Priority.
Default Mapping Table
DSCP… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.13 |
| fsQoSIngressDscpMapProfileTable This object specifies the table containing Ingress Dscp Profile Table.
Currently table will store the user specified DSCP Packet priority to internal Priority.
Currently this Prof… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.14 |
| fsQoSStatus Enables or Disables QoS Module in the system.
When set as 'enabled', QoS module programs the hardware
and starts Protocol Operation.
When set as 'disabled', it stops protocol oper… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.2 |
| fsQoSTrcFlag This object is used to enable trace statements in QoS module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particula… | scalar | Unsigned32 | .1.3.6.1.4.1.29601.2.6.1.1.3 |
| fsQoSRateUnit This Object indicates the unit for the
Information Rate(CIR,PIR,PIR,PTR,CTR ...)values
based on target platform.
This Object specifies the unit alone. Value corresponding
to … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.4 |
| fsQoSRateGranularity This Object indicates the acceptable Granularity level
for configuring the Information Rate(CIR,PIR,PIR,PTR,
CTR ...)values for a target platform.
This Object specifies the Integ… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.6.1.1.5 |
| fsQoSVlanQueueingStatus This object is used to enable or disable Vlan Based Queueing
in the system. When set as 'enabled', QoS module programs the
hardware with the Hierarchical Scheduling Schema for Vl… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.9 |
| fsQoSIngressDot1pMapProfileTable This object specifies the table containing Ingress Dot1.p Profile Table.
Currently table will store the Dot1.p Packet priority to internal Priority.
Default mapping is given below… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.7 |
| fsQoSEgressDot1pMapProfileTable This object specifies the table containing Egress Dot1.p Profile Table.
Currently table will store the internal Priority to Dot1.p.
Default mapping is given below.
Internal Priori… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.8 |
| fsQoSIngressExpMapProfileTable This object specifies the table containing Ingress Experimental Profile Table.
Currently table will store the Experimental priority to internal Priority.
When this profile is mapp… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsQoSProfileMappingeEntry This object specifies the information controlling per port configuration for Priority Code Point
Encoding and Decoding. | row | - | .1.3.6.1.4.1.29601.2.6.1.1.11.1 |