fsQoSEgressExpDot1pMapProfileTable
ARICENT-DIFFSERV-MIB ·
.1.3.6.1.4.1.29601.2.6.1.1.12
Object
table
This object specifies the table containing Egress MPLS Profile Table.
Currently table will store the internal Priority to Experimental and DOT1P
value. When this profile is mapped to an interface, it will be applied to
all the tunnels created on top of that interface.
Default mapping is given below.
Internal Priority | Exp | DOT1P
0 | 0 | 0
1 | 1 | 1
2 | 2 | 2
3 | 3 | 3
4 | 4 | 4
5 | 5 | 5
6 | 6 | 6
7 | 7 | 7
This profile is meant only for egress. This creates a profile which maps internal
priority to both EXP and DOT1P for the specific label. This profile if mapped on
an interface, will be effective for all tunnels. This profile will not apply for
egress DOT1P mapping of the interface; if DOT1P profile alone need to be mapped
to the interface, then egress DOT1P profile needs to be attached separately.
Currently this Profile table is supported for BCM and its not supported for Marvell.
Similarly , if any other Chipset supports profile concept, we can use new table
else the user has to use Old Priority mapping table.
Context
- MIB
- ARICENT-DIFFSERV-MIB
- OID
.1.3.6.1.4.1.29601.2.6.1.1.12- Type
- table
- Status
- current
- Parent
- fsQoSSystem
- Siblings
- 13
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
Object Constraints
range: 0-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsQoSSystemControl Starts or shutdowns QoS Module in the system.
When set as 'start',resources required by QoS module are
allocated & QoS module starts running.
When shutdown, all the pools used by … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.1 |
| fsQoSEgressExpMapProfileTable This object specifies the table containing Egress MPLS Profile Table.
Currently table will store the internal Priority to Experimental value.
When this profile is mapped to an int… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.10 |
| fsQoSProfileMappingTable This object specifies the table that associates Dot1P or EXP ingress
and egress profiles on an interface.
When profiles are attached to a sub-interface, then the attachment will … | table | - | .1.3.6.1.4.1.29601.2.6.1.1.11 |
| fsQoSIngressDscpProfileTable This object specifies the table containing Ingress Dscp Profile Table.
Currently table will store the default DSCP Packet priority to
internal Priority.
Default Mapping Table
DSCP… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.13 |
| fsQoSIngressDscpMapProfileTable This object specifies the table containing Ingress Dscp Profile Table.
Currently table will store the user specified DSCP Packet priority to internal Priority.
Currently this Prof… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.14 |
| fsQoSStatus Enables or Disables QoS Module in the system.
When set as 'enabled', QoS module programs the hardware
and starts Protocol Operation.
When set as 'disabled', it stops protocol oper… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.2 |
| fsQoSTrcFlag This object is used to enable trace statements in QoS module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particula… | scalar | Unsigned32 | .1.3.6.1.4.1.29601.2.6.1.1.3 |
| fsQoSRateUnit This Object indicates the unit for the
Information Rate(CIR,PIR,PIR,PTR,CTR ...)values
based on target platform.
This Object specifies the unit alone. Value corresponding
to … | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.4 |
| fsQoSRateGranularity This Object indicates the acceptable Granularity level
for configuring the Information Rate(CIR,PIR,PIR,PTR,
CTR ...)values for a target platform.
This Object specifies the Integ… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.6.1.1.5 |
| fsQoSVlanQueueingStatus This object is used to enable or disable Vlan Based Queueing
in the system. When set as 'enabled', QoS module programs the
hardware with the Hierarchical Scheduling Schema for Vl… | scalar | Enumeration | .1.3.6.1.4.1.29601.2.6.1.1.9 |
| fsQoSIngressDot1pMapProfileTable This object specifies the table containing Ingress Dot1.p Profile Table.
Currently table will store the Dot1.p Packet priority to internal Priority.
Default mapping is given below… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.7 |
| fsQoSEgressDot1pMapProfileTable This object specifies the table containing Egress Dot1.p Profile Table.
Currently table will store the internal Priority to Dot1.p.
Default mapping is given below.
Internal Priori… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.8 |
| fsQoSIngressExpMapProfileTable This object specifies the table containing Ingress Experimental Profile Table.
Currently table will store the Experimental priority to internal Priority.
When this profile is mapp… | table | - | .1.3.6.1.4.1.29601.2.6.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsQoSEgressExpDot1pMapProfileEntry This object specifies the information controlling per Profile configuration for Internal Priority to Experimental Bit and DOT1P Priority. | row | - | .1.3.6.1.4.1.29601.2.6.1.1.12.1 |