fsQoSEgressDot1pMapProfileTable

ARICENT-DIFFSERV-MIB · .1.3.6.1.4.1.29601.2.6.1.1.8

MIB view Table view

Object

table

This object specifies the table containing Egress Dot1.p Profile Table.
Currently table will store the internal Priority to Dot1.p.
Default mapping is given below.
Internal Priority |    Dot 1.p
     0            |        0
     1            |        1
     2            |        2
     3            |        3
     4            |        4
     5            |        5
     6            |        6
     7            |        7
 Currently this Profile table is supported for BCM and its not supported for Marvell.
 Similarly , if any other Chipset supports profile concept, we can use new table
 else the user has to use Old Priority mapping table.

Context

MIB: ARICENT-DIFFSERV-MIB
OID: .1.3.6.1.4.1.29601.2.6.1.1.8
Type: table
Status: current
Parent: fsQoSSystem
Siblings: 13
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsQoSSystemControl Starts or shutdowns QoS Module in the system. When set as 'start',resources required by QoS module are allocated & QoS module starts running. When shutdown, all the pools used by …	scalar	Enumeration	`.1.3.6.1.4.1.29601.2.6.1.1.1`
fsQoSEgressExpMapProfileTable This object specifies the table containing Egress MPLS Profile Table. Currently table will store the internal Priority to Experimental value. When this profile is mapped to an int…	table	-	`.1.3.6.1.4.1.29601.2.6.1.1.10`
fsQoSProfileMappingTable This object specifies the table that associates Dot1P or EXP ingress and egress profiles on an interface. When profiles are attached to a sub-interface, then the attachment will …	table	-	`.1.3.6.1.4.1.29601.2.6.1.1.11`
fsQoSEgressExpDot1pMapProfileTable This object specifies the table containing Egress MPLS Profile Table. Currently table will store the internal Priority to Experimental and DOT1P value. When this profile is mapped…	table	-	`.1.3.6.1.4.1.29601.2.6.1.1.12`
fsQoSIngressDscpProfileTable This object specifies the table containing Ingress Dscp Profile Table. Currently table will store the default DSCP Packet priority to internal Priority. Default Mapping Table DSCP…	table	-	`.1.3.6.1.4.1.29601.2.6.1.1.13`
fsQoSIngressDscpMapProfileTable This object specifies the table containing Ingress Dscp Profile Table. Currently table will store the user specified DSCP Packet priority to internal Priority. Currently this Prof…	table	-	`.1.3.6.1.4.1.29601.2.6.1.1.14`
fsQoSStatus Enables or Disables QoS Module in the system. When set as 'enabled', QoS module programs the hardware and starts Protocol Operation. When set as 'disabled', it stops protocol oper…	scalar	Enumeration	`.1.3.6.1.4.1.29601.2.6.1.1.2`
fsQoSTrcFlag This object is used to enable trace statements in QoS module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents a particula…	scalar	Unsigned32	`.1.3.6.1.4.1.29601.2.6.1.1.3`
fsQoSRateUnit This Object indicates the unit for the Information Rate(CIR,PIR,PIR,PTR,CTR ...)values based on target platform. This Object specifies the unit alone. Value corresponding to …	scalar	Enumeration	`.1.3.6.1.4.1.29601.2.6.1.1.4`
fsQoSRateGranularity This Object indicates the acceptable Granularity level for configuring the Information Rate(CIR,PIR,PIR,PTR, CTR ...)values for a target platform. This Object specifies the Integ…	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.29601.2.6.1.1.5`
fsQoSVlanQueueingStatus This object is used to enable or disable Vlan Based Queueing in the system. When set as 'enabled', QoS module programs the hardware with the Hierarchical Scheduling Schema for Vl…	scalar	Enumeration	`.1.3.6.1.4.1.29601.2.6.1.1.9`
fsQoSIngressDot1pMapProfileTable This object specifies the table containing Ingress Dot1.p Profile Table. Currently table will store the Dot1.p Packet priority to internal Priority. Default mapping is given below…	table	-	`.1.3.6.1.4.1.29601.2.6.1.1.7`
fsQoSIngressExpMapProfileTable This object specifies the table containing Ingress Experimental Profile Table. Currently table will store the Experimental priority to internal Priority. When this profile is mapp…	table	-	`.1.3.6.1.4.1.29601.2.6.1.1.9`

Child Objects