fsDhcp6RlyIfRemoteIdUserDefined

ARICENT-DHCPv6-RELAY-MIB · .1.3.6.1.4.1.29601.2.41.2.1.1.16
MIB view Table view

Object

column r/w OctetString 
This object is used to configure the administrative specific unique ascii
value for DHCPv6 Relay Agent.
              
DHCPv6 servers can use this value to make decisions about the
information such as addresses, delegated prefixes, configuration parameters etc,
that the client is to receive.
              
Relay Agent uses this unique ascii value to have a unique remote-id for its
enterprise number, as sequence of enterprise number followed by remote-id must
be globally unique.
              
DHCPv6 Relay String is a user defined parameter so it can be set to any
value within defined boundaries.
DHCPv6 Relay ascii value is a 128 octets long identifier which can have any
administrative configured ascii value representing the unique string.
              
This Object will be used only if value of fsDhcp6RlyIfRemoteIdOption object
is set as userDefined (4).

Context

MIB
ARICENT-DHCPv6-RELAY-MIB
OID
.1.3.6.1.4.1.29601.2.41.2.1.1.16
Type
column
Access
readwrite
Status
current
Parent
fsDhcp6RlyIfEntry
Table
fsDhcp6RlyIfTable
Siblings
14

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-128

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsDhcp6RlyIfIndex
This object identifies the unique Interface Index value mapped to this Server Address Table..
columnInteger32.1.3.6.1.4.1.29601.2.41.2.1.1.1
fsDhcp6RlyIfInvalidPktIn
This object identifies the number of Invalid messages received on the Interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.29601.2.41.2.1.1.10
fsDhcp6RlyIfCounterRest
This object is used to reset all the statistics counter objects present in this table. This will be done by setting the value of this column to 'true(1)'. This column always reads…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.29601.2.41.2.1.1.11
fsDhcp6RlyIfRowStatus
This object is used to create/delete a row in the interface table. when the interface is deleted from the system the corresponding row from this table will also be deleted.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.29601.2.41.2.1.1.12
fsDhcp6RlyIfRemoteIdOption
This object is used to specify which parameter has to be included as remote-id in the outgoing relay-fwd message. DUID (DHCP Unique Identifier) : If fsDhcp6RlyIfRem…
columnEnumeration.1.3.6.1.4.1.29601.2.41.2.1.1.13
fsDhcp6RlyIfRemoteIdDUID
This object is used to define the appropriate DUID for DHCPv6 Relay Agent. Any communicating device (in dhcpv6 perspective) have a unique DHCPv6 identifier (DUID). …
columnOctetString.1.3.6.1.4.1.29601.2.41.2.1.1.14
fsDhcp6RlyIfRemoteIdOptionValue
This object is used to get the current value of the remote-id option (specified by fsDhcp6RlyIfRemoteIdOption object ), which is being used as remote-id in dhcpv6 relay agent. …
columnOctetString.1.3.6.1.4.1.29601.2.41.2.1.1.15
fsDhcp6RlyIfRelayForwOut
This object identifies the number of RELAY FORWARD messages transmitted on the Interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.29601.2.41.2.1.1.17
fsDhcp6RlyIfRelayReplyOut
This object identifies the number of RELAY REPLY messages transmitted on the Interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.29601.2.41.2.1.1.18
fsDhcp6RlyIfRelayState
This object identifies whether the server is configured dynamically , statically or both has been set to an interface
columnEnumeration.1.3.6.1.4.1.29601.2.41.2.1.1.19
fsDhcp6RlyIfHopThreshold
A maximum hop count, a relay agent allow to pass through it. If the HopCount in the DHCP Message is greater than the fsDhcp6RlyHopsThreshold packet get dropped at the Relay Agent
columnInteger32.1.3.6.1.4.1.29601.2.41.2.1.1.3
fsDhcp6RlyIfInformIn
This object identifies the number of INFORMATION REQUEST messages received on the Interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.29601.2.41.2.1.1.4
fsDhcp6RlyIfRelayForwIn
This object identifies the number of RELAY FORWARD messages received on the Interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.29601.2.41.2.1.1.5
fsDhcp6RlyIfRelayReplyIn
This object identifies the number of RELAY REPLY messages received on the Interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.29601.2.41.2.1.1.6