fsDhcp6RlyIfRelayState
ARICENT-DHCPv6-RELAY-MIB ·
.1.3.6.1.4.1.29601.2.41.2.1.1.19
Object
column
r/w
Enumeration
This object identifies whether the server is configured dynamically , statically or both has been set to an interface
Context
- MIB
- ARICENT-DHCPv6-RELAY-MIB
- OID
.1.3.6.1.4.1.29601.2.41.2.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsDhcp6RlyIfEntry
- Table
- fsDhcp6RlyIfTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | dynamic |
2 | static |
3 | both |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsDhcp6RlyIfIndex This object identifies the unique Interface Index
value mapped to this Server Address Table.. | column | Integer32 | .1.3.6.1.4.1.29601.2.41.2.1.1.1 |
| fsDhcp6RlyIfInvalidPktIn This object identifies the number of Invalid messages
received on the Interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.41.2.1.1.10 |
| fsDhcp6RlyIfCounterRest This object is used to reset all the statistics counter objects present
in this table. This will be done by setting the value of this column to
'true(1)'.
This column always reads… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.41.2.1.1.11 |
| fsDhcp6RlyIfRowStatus This object is used to create/delete a row in the interface table.
when the interface is deleted from the system the corresponding
row from this table will also be deleted. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.41.2.1.1.12 |
| fsDhcp6RlyIfRemoteIdOption This object is used to specify which parameter has to be included
as remote-id in the outgoing relay-fwd message.
DUID (DHCP Unique Identifier) : If fsDhcp6RlyIfRem… | column | Enumeration | .1.3.6.1.4.1.29601.2.41.2.1.1.13 |
| fsDhcp6RlyIfRemoteIdDUID This object is used to define the appropriate DUID for DHCPv6
Relay Agent.
Any communicating device (in dhcpv6 perspective) have a unique
DHCPv6 identifier (DUID). … | column | OctetString | .1.3.6.1.4.1.29601.2.41.2.1.1.14 |
| fsDhcp6RlyIfRemoteIdOptionValue This object is used to get the current value of the remote-id option
(specified by fsDhcp6RlyIfRemoteIdOption object ), which is being used as
remote-id in dhcpv6 relay agent.
… | column | OctetString | .1.3.6.1.4.1.29601.2.41.2.1.1.15 |
| fsDhcp6RlyIfRemoteIdUserDefined This object is used to configure the administrative specific unique ascii
value for DHCPv6 Relay Agent.
DHCPv6 servers can use this value to make decisions about th… | column | OctetString | .1.3.6.1.4.1.29601.2.41.2.1.1.16 |
| fsDhcp6RlyIfRelayForwOut This object identifies the number of RELAY FORWARD messages
transmitted on the Interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.41.2.1.1.17 |
| fsDhcp6RlyIfRelayReplyOut This object identifies the number of RELAY REPLY messages
transmitted on the Interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.41.2.1.1.18 |
| fsDhcp6RlyIfHopThreshold A maximum hop count, a relay agent allow to pass through it. If
the HopCount in the DHCP Message is greater than the
fsDhcp6RlyHopsThreshold packet get dropped at the Relay Agent | column | Integer32 | .1.3.6.1.4.1.29601.2.41.2.1.1.3 |
| fsDhcp6RlyIfInformIn This object identifies the number of INFORMATION REQUEST messages
received on the Interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.41.2.1.1.4 |
| fsDhcp6RlyIfRelayForwIn This object identifies the number of RELAY FORWARD messages
received on the Interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.41.2.1.1.5 |
| fsDhcp6RlyIfRelayReplyIn This object identifies the number of RELAY REPLY messages
received on the Interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.41.2.1.1.6 |