fsbgp4mpePeerExtEBGPHopLimit
ARICENT-BGP-MIB ·
.1.3.6.1.4.1.2076.41.21.1.6
Object
column
r/w
Integer32
This objects enables the BGP4 Speaker to accept or attempt connections to external peers residing on network that are not directly connected and seperated by a maximum hop limit as configured by this object. For the internal peers, this object has no effect.
Context
- MIB
- ARICENT-BGP-MIB
- OID
.1.3.6.1.4.1.2076.41.21.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsbgp4MpePeerExtEntry
- Table
- fsbgp4MpePeerExtTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsbgp4mpePeerExtPeerType The Type of the remote peer | column | InetAddressType | .1.3.6.1.4.1.2076.41.21.1.1 |
| fsbgp4mpePeerExtTcpRcvBufSize This object configures the tcp window size on the receiver side. | column | Integer32 | .1.3.6.1.4.1.2076.41.21.1.10 |
| fsbgp4mpePeerExtLclAddress This object specifies which address should be used as the source address
of the TCP session initiated with the Peer. By default this object takes
value as 0 and the source address… | column | InetAddress | .1.3.6.1.4.1.2076.41.21.1.11 |
| fsbgp4mpePeerExtNetworkAddress This object specifies the remote peer's network address. TCP connection is
established using the peer's remote-address. If the peer's remote-address
is a IPv4 address, the peer's … | column | InetAddress | .1.3.6.1.4.1.2076.41.21.1.12 |
| fsbgp4mpePeerExtGateway This object specifies the gateway router's address that will be used as
nexthop in the routes advertised to the peer. This ensures that the
traffic coming from this peer is rou… | column | InetAddress | .1.3.6.1.4.1.2076.41.21.1.13 |
| fsbgp4mpePeerExtCommSendStatus Community Send status of the peer.
o none - is for read-only
o send - send communities to this peer
o donotsend - do not send communities to this peer. | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.14 |
| fsbgp4mpePeerExtECommSendStatus Extended Community Send status of the peer.
o none - is for read-only
o send - send extended communities to this peer
o donotsend - do not send extended communities to… | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.15 |
| fsbgp4mpePeerExtPassive This object is used to set a peer connection to be passive, that means
the speaker will not initiate the session with that peer instead it
waits for the remote peer to initiate th… | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.16 |
| fsbgp4mpePeerExtDefaultOriginate If this object is set to enable/disable the advertisement of the default
route to the peer. This object overrides the global default
route configuration (fsbgp4DefaultOriginate) a… | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.17 |
| fsbgp4mpePeerExtActivateMPCapability This object is set to activate the corresponding MP Capability.
If any of MP Capability is activate, then this capability should
be negotiated while establishing session with this… | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.18 |
| fsbgp4mpePeerExtDeactivateMPCapability This object is set to deactivate the corresponding MP Capability.
If any of MP Capability is deactivate, then this capability should
not be negotiated while establishing session w… | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.19 |
| fsbgp4mpePeerExtPeerRemoteAddr The remote IP address of this entry's BGP peer. | column | InetAddress | .1.3.6.1.4.1.2076.41.21.1.2 |
| fsbgp4mpePeerExtMplsVpnVrfAssociated Denotes the VRF associated with the CE peer. If the Vrf Name
is not configured, the peer will be normal peer.
with respect to this VRF. | column | OctetString | .1.3.6.1.4.1.2076.41.21.1.20 |
| fsbgp4mpePeerExtMplsVpnCERouteTargetAdvt This variable is used to inform whether the PE can receive Route
Targets from CE, or PE can send Route Targets(RT) to CE router.
By default sending RT to CE and receiving RT from … | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.21 |
| fsbgp4mpePeerExtMplsVpnCESiteOfOrigin Site Of Origin for the site connected CE peer | column | OctetString | .1.3.6.1.4.1.2076.41.21.1.22 |
| fsbgp4mpePeerExtOverrideCapability If this object is set to enable/disable the override capability for the BGP Peer | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.24 |
| fsbgp4mpePeerExtConfigurePeer This object is used to create or delete a peer. If called with create
and no matching peer exists, then a new peer entry will be created. The
admin status of this newly created pe… | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.3 |
| fsbgp4mpePeerExtPeerRemoteAs The remote autonomous system number of the Peer. The peer admin status
can be made up only if this object is configured for a valid AS number.
When OPEN message is received from t… | column | Unsigned32 | .1.3.6.1.4.1.2076.41.21.1.4 |
| fsbgp4mpePeerExtEBGPMultiHop This objects enables the BGP4 Speaker to accept or attempt
connections to external peers residing on network that are not directly
connected. By default, only directly connected E… | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.5 |
| fsbgp4mpePeerExtNextHopSelf This object specifies how the next hop attribute sent in the update
messages to this peer has to be generated. When the object takes the
value of self,the next Hop attribute wil… | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.7 |
| fsbgp4mpePeerExtRflClient This object specifies whether the peer is Client peer or Non-Client
peer. By default, the peer is created as Non-Client Peer. | column | Enumeration | .1.3.6.1.4.1.2076.41.21.1.8 |
| fsbgp4mpePeerExtTcpSendBufSize This object configures the tcp window size on the sender side. | column | Integer32 | .1.3.6.1.4.1.2076.41.21.1.9 |