fsBfdSessEncapType

ARICENT-BFD-MIB · .1.3.6.1.4.1.29601.2.53.2.1.1.7
MIB view Table view

Object

column r/w Enumeration 
This object specifies the encapsulation type of the 
BFD Control packets. In case of MPLS LSP/Tunnel, the 
encapsulation type should be set to mplsIp, which is the
default value for MPLS LSP/Tunnel.Note that for an MPLS
LSP/Tunnel,an IP return path, if present, will be used to 
send the BFD control packets, in case an MPLS LSP/Tunnel
return path is not available.
              
For MPLS-TP LSP/Tunnel any one of the following 
types: mplsIp, mplsAch or mplsAchIp is applicable, 
mplsAch being the default.For MPLS or MPLS-TP PW,
the encapsulation type should be set to vccvNegotiated, 
which is the default value for MPLS and 
MPLS-TP PW.

Context

MIB
ARICENT-BFD-MIB
OID
.1.3.6.1.4.1.29601.2.53.2.1.1.7
Type
column
Access
readwrite
Status
current
Parent
fsBfdSessionEntry
Table
fsBfdSessionTable
Siblings
13

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsBfdSessRole
This object specifies whether the system is playing the active(1) role or the passive(2) role for this BFD session. BFD session will not come up if both the ends of a path are co…
columnEnumeration.1.3.6.1.4.1.29601.2.53.2.1.1.1
fsBfdSessMapType
This object indicates the type of path being monitored by this BFD session entry.
columnFsSessionMapTypeTC.1.3.6.1.4.1.29601.2.53.2.1.1.10
fsBfdSessMapPointer
If fsBfdSessMapType is ldpipv4(1) or ldpipv6(2), then this object MUST contain zeroDotZero or point to an instance of the mplsXCEntry indicating the LDP-based LSP associated with…
columnSNMPv2-TCRowPointer.1.3.6.1.4.1.29601.2.53.2.1.1.11
fsBfdSessCardNumber
This object specifies the card number to which the BFD session is offloaded.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.53.2.1.1.12
fsBfdSessSlotNumber
This object specifies the slot number to which the BFD session is offloaded.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.53.2.1.1.13
fsBfdSessRegisteredClients
This object specifies the BFD clients who are all registered for the particular session. When each client register for the session, the bit corresponding to the Client ID will b…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.53.2.1.1.14
fsBfdSessMode
This object specifies whether the BFD session is running in Continuity Check(CC) or the Connectivity Verification(CV) mode. This object is always cc(1) if the value of fsBfdSessM…
columnEnumeration.1.3.6.1.4.1.29601.2.53.2.1.1.2
fsBfdSessRemoteDiscr
This object specifies the session discriminator that is to be used by the remote system for this BFD session. This object is configurable for both MPLS and MPLS-TP paths. …
columnUnsigned32.1.3.6.1.4.1.29601.2.53.2.1.1.3
fsBfdSessEXPValue
This object specifies the MPLS experimental field(traffic class field) value that should be sent in the MPLS header for the BFD control packets.
columnUnsigned32.1.3.6.1.4.1.29601.2.53.2.1.1.4
fsBfdSessTmrNegotiate
This object specifies if timer negotiation is required for the BFD session. When set to false, timer negotiation is disabled and if the value of the received DesiredMinTxInterval…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.29601.2.53.2.1.1.5
fsBfdSessOffld
This object specifies if the BFD session needs to be offloaded onto a specific hardware chipset or an external software component or a seperate CPU/Core. When set to true the BFD…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.29601.2.53.2.1.1.6
fsBfdSessAdminCtrlReq
This object specifies if an administrator control or intervention is required for the session due to an error specified by fsBfdSessAdminCtrlErrReason. This object will display …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.29601.2.53.2.1.1.8
fsBfdSessAdminCtrlErrReason
This object specifies the reason for an error in the BFD session. For instance, when offloading of a BFD session fails due to any reason, this object is set to the value sessOffl…
columnEnumeration.1.3.6.1.4.1.29601.2.53.2.1.1.9