apsStatusCurrentR

APS-R-MIB · .1.3.6.1.4.1.164.20.2.1.2.1.3

Object

column Bits

The current status of the APS group.
              
modeMismatch
              
Modes other than 1+1 unidirectional monitor protection line
K2 bit 5, which indicates the architecture  and K2 bits
6-8, which indicate if the mode is unidirectional or
bidirectional. A conflict between the current local mode
and the received K2 mode information constitutes a
mode mismatch.
              
channelMismatch
              
This bit indicates a  mismatch between the transmitted K1 channel
and the received K2 channel has been detected.
              
psbf
              
This bit indicates a Protection Switch Byte Failure (PSBF) is
in effect. This condition occurs when an invalid code or
persistently unacceptable codes in the K1 byte are received.
              
feplf
              
Modes other than 1+1 unidirectional monitor the K1 byte
for Far-End Protection-Line failures. A Far-End
Protection-Line defect is declared based on receiving
SF on the protection line.
              
extraTraffic
              
This bit indicates whether extra traffic is currently being
accepted on the protection line.

Context

MIB: APS-R-MIB
OID: .1.3.6.1.4.1.164.20.2.1.2.1.3
Type: column
Access: readonly
Status: current
Parent: apsStatusEntryR
Table: apsStatusTableR
Siblings: 6

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	modeMismatch
`1`	channelMismatch
`2`	psbf
`3`	feplf
`4`	extraTraffic

Related Objects

Sibling Objects

Object	Type	Syntax	OID
apsStatusK1K2RcvR The current value of the K1 and K2 bytes received on the protection channel.	column	ApsK1K2	`.1.3.6.1.4.1.164.20.2.1.2.1.1`
apsStatusK1K2TransR The current value of the K1 and K2 bytes transmitted on the protection channel.	column	ApsK1K2	`.1.3.6.1.4.1.164.20.2.1.2.1.2`
apsStatusModeMismatchesR A count of Mode Mismatch conditions.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.164.20.2.1.2.1.4`
apsStatusChannelMismatchesR A count of Channel Mismatch conditions.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.164.20.2.1.2.1.5`
apsStatusPSBFsR A count of Protection Switch Byte Failure conditions. This condition occurs when an invalid code or persistently unacceptable codes in the K1 byte are received.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.164.20.2.1.2.1.6`
apsStatusFEPLFsR A count of Far-End Protection-Line Failure conditions. This condition is declared based on receiving SF on the protection line in the K1 byte.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.164.20.2.1.2.1.7`