junidApsChanStatusSwitchoverSeconds
APS-MIB-JUNI ·
.1.3.6.1.4.1.4874.3.2.2.1.1.6.1.6
Object
column
SNMPv2-SMICounter32
The cumulative Protection Switching Duration (PSD) time in seconds. For a working channel, this is the cumulative number of seconds that service was carried on the protection line. For the protection line, this is the cumulative number of seconds that the protection line has been used to carry any working channel traffic. This information is only valid if revertive switching is enabled. The value 0 will be returned otherwise.
Context
- MIB
- APS-MIB-JUNI
- OID
.1.3.6.1.4.1.4874.3.2.2.1.1.6.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- junidApsChanStatusEntry
- Table
- junidApsChanStatusTable
- Siblings
- 5
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| junidApsChanStatusCurrent Indicates the current state of the port.
lockedOut
This bit, when applied to a working channel, indicates that
the channel is prevented from switchin… | column | Bits | .1.3.6.1.4.1.4874.3.2.2.1.1.6.1.1 |
| junidApsChanStatusSignalDegrades A count of Signal Degrade conditions. This
condition occurs when the line Bit Error Rate
exceeds the currently configured threshold. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.3.2.2.1.1.6.1.2 |
| junidApsChanStatusSignalFailures A count of Signal Failure conditions that have been
detected on the incoming signal. This condition occurs
when a loss of signal, loss of frame, AIS-L or a Line
bit error rate exc… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.3.2.2.1.1.6.1.3 |
| junidApsChanStatusSwitchovers The number of times this channel has switched to the protection
line. When queried with index value junidApsChanConfigNumber set to 0,
which is the protection line, this object wi… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.3.2.2.1.1.6.1.4 |
| junidApsChanStatusLastSwitchover The value of sysUpTime when this channel last completed a switch
to the protection line. If this channel has never switched to the
protection line, or this channel is the protecti… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4874.3.2.2.1.1.6.1.5 |