apolloTrVolLowThreshold
APOLLO-MIB ·
.1.3.6.1.4.1.5395.3.7.5.1.48
Object
column
OctetString
Supply Voltage Low Threshold. Its value is expressed in Volt
Context
- MIB
- APOLLO-MIB
- OID
.1.3.6.1.4.1.5395.3.7.5.1.48- Type
- column
- Access
- readonly
- Status
- current
- Parent
- apolloTransEntry
- Table
- apolloTransTable
- Siblings
- 49
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apolloTrIfIndex This attribute will be the ifIndex of the lowest PIF available
on a port.In case, there are multiple PIF's on the same port,
all entries will report the same values. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.5395.3.7.5.1.1 |
| apolloInputDispersion Input Dispersion value of the Transceiver
plugged in this port | column | ps/nm Integer32 | .1.3.6.1.4.1.5395.3.7.5.1.10 |
| apolloInputOSNR Input OSNR value of the Transceiver plugged in this port.
Value will be expressed in db | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.11 |
| apolloInputPMD Input PMD[Polarization Mode Dispersion] value of the
Transceiver plugged in this port | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.12 |
| apolloInputNLP Input NLP[Non Liner Phenomenon] value of the
Transceiver plugged in this port | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.13 |
| apolloOutputDispersion Output Dispersion value of the Transceiver plugged in this port | column | ps/nm Integer32 | .1.3.6.1.4.1.5395.3.7.5.1.14 |
| apolloOutputOSNR Output OSNR value of the Transceiver plugged in this port.
Value will be expressed in db | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.15 |
| apolloOutputPMD Output PMD[Polarization Mode Dispersion] of the Transceiver
plugged in this port | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.16 |
| apolloOutputNLP Output NLP[Non Linear Phenomenon] of the Transceiver
plugged in this port | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.17 |
| apolloFrequencySpread Frequency Spread value of the Transceiver
plugged in this port | column | Enumeration | .1.3.6.1.4.1.5395.3.7.5.1.18 |
| apolloLineCode Line code value of the Transceiver plugged in this port | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.19 |
| apolloTrStatus This is a bit-map which is represented using a 32 bit number where
each bit represent alarm type as below:
0 represents the least significant bit and 31 represents the most signi… | column | Integer32 | .1.3.6.1.4.1.5395.3.7.5.1.2 |
| apolloMeasuredOSNR Measured OSNR value of the transceiver plugged in this port | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.20 |
| apolloTrTemperature Laser Temperature of the transceiver plugged in this port. Its
value is expressed in Cel | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.21 |
| apolloTrSupplyVoltage Supply Voltage of the transceiver plugged in this port. Its
value is expressed in Volt | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.22 |
| apolloTrRxPowerLane1 Rx Power Lane 1. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.23 |
| apolloTrRxPowerLane2 Rx Power Lane 2. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.24 |
| apolloTrRxPowerLane3 Rx Power Lane 3. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.25 |
| apolloTrRxPowerLane4 Rx Power Lane 4. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.26 |
| apolloTrRxPowLaneHighThreshold Rx Power Lane High Threshold. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.27 |
| apolloTrRxPowLaneLowThreshold Rx Power Lane Low Threshold. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.28 |
| apolloTrRxPowLaneHighWarn Rx Power Lane High Warning Threshold. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.29 |
| apolloTrType The actual type of Transceiver plugged in this port | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.3 |
| apolloTrRxPowLaneLowWarn Rx Power Lane Low Warning Threshold. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.30 |
| apolloTrTxPowerLane1 Tx Power Lane 1. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.31 |
| apolloTrTxPowerLane2 Tx Power Lane 2. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.32 |
| apolloTrTxPowerLane3 Tx Power Lane 3. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.33 |
| apolloTrTxPowerLane4 Tx Power Lane 4. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.34 |
| apolloTrTxPowLaneHighThreshold Tx Power Lane High Threshold. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.35 |
| apolloTrTxPowLaneLowThreshold Tx Power Lane Low Threshold. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.36 |
| apolloTrTxPowLaneHighWarn Tx Power Lane High Warning Threshold. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.37 |
| apolloTrTxPowLaneLowWarn Tx Power Lane Low Warning Threshold. Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.38 |
| apolloTrBiasHighThreshold Laser Bias High Threshold. Its value is expressed in mA | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.39 |
| apolloTrActTxState The actual laser state (On/OFF) of the Transceiver plugged in this port | column | Enumeration | .1.3.6.1.4.1.5395.3.7.5.1.4 |
| apolloTrBiasLowThreshold Laser Bias Low Threshold. Its value is expressed in mA | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.40 |
| apolloTrBiasHighWarn Laser Bias High Warning Threshold. Its value is expressed in mA | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.41 |
| apolloTrBiasLowWarn Laser Bias Low Warning Threshold. Its value is expressed in mA | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.42 |
| apolloTrTempHighThreshold Laser Temperature High Threshold. Its value is expressed in Cel | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.43 |
| apolloTrTempLowThreshold Laser Temperature Low Threshold. Its value is expressed in Cel | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.44 |
| apolloTrTempHighWarn Laser Temperature High Warning Threshold. Its value is expressed in Cel | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.45 |
| apolloTrTempLowWarn Laser Temperature Low Warning Threshold. Its value is expressed in Cel | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.46 |
| apolloTrVolHighThreshold Supply Voltage High Threshold. Its value is expressed in Volt | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.47 |
| apolloTrVolHighWarn Supply Voltage High Warning Threshold. Its value is expressed in Volt | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.49 |
| apolloTrRxPower Actual Rx Power received on the transceiver.Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.5 |
| apolloTrVolLowWarn Supply Voltage Low Warning Threshold. Its value is expressed in Volt | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.50 |
| apolloTrTxPower Actual Tx Power transmitted on the transceiver.Its value is expressed in dBm | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.6 |
| apolloTrBias Laser Bias of the transceiver plugged in this port. Its value is expressed in mA | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.7 |
| apolloTrOsnrMin Minimum OSNR value of the Transceiver plugged in this port.
Value will be expressed in db | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.8 |
| apolloTrOsnrMax Maximum OSNR value of the Transceiver plugged in this port.
Value will be expressed in db | column | OctetString | .1.3.6.1.4.1.5395.3.7.5.1.9 |