apolloIfStatus

This attribute intends to address generic failures and
failures that are not reflected by technology-specific MIBs.
Bit positions meaning shall be context sensitive (i.e., per ifType)
              
 Bit zero is set to indicate 'No Failure' regardless of
 the IfType
              
For IfType = OtnOtu following are the alarms and the bit positions 
that will be set (assuming bit positions start from 0)
Trail Trace ID Mismatch(1),Loss Of Frame(2),Signal Degraded (3),
Loss of Multi Frame(4),Backward Defect Indication(5),
Equipment plugged out(6),Installed equipment differs from the configured one(7)
Built-in test: HW failed(8),Built-in test: HW degraded(9),
Built-in test: HW slightly degraded(10),High Temperature(11),
Input power greater than predetermined threshold(12),
Input power lower than predetermined threshold(13),
Output power greater than predetermined threshold(14),
Output power lower than predetermined threshold(15),
Transceiver bias out of range(16),Wavelength mismatch(17),
Loss of Signal(18),LF(19),RF(20),
Broadcast Packets 15M(21),Multicast Packets 15M(22),
Group Address To MAC Ambiguity 15M(23),
IGMP Query At Access 15M(24),Rx Error Octets 15M(25),
Priority 0 Random Drop Octets Alarm 15M(26),
Priority 1 Random Drop Octets Alarm 15M(27),
Priority 2 Random Drop Octets Alarm 15M(28),
Priority 3 Random Drop Octets Alarm 15M(29),
Priority 4 Random Drop Octets Alarm 15M(30),
Priority 5 Random Drop Octets Alarm 15M(31),
Priority 6 Random Drop Octets Alarm 15M(32),
Priority 7 Random Drop Octets Alarm 15M(33),
Tx Utilization Percent 15M(34),OAM Discovery Failed(35),
OAM Remote Link Fault(36),OAM Remote Link Event(37),
OAM Local Link Event(38),Loss of Data(39),
Threshold Crossing Alert: Near End Errored Seconds, 15 minutes(40),
Threshold Crossing Alert: Near End Severely Errored Seconds, 15 minutes(41),
Threshold Crossing Alert: Near End Background Block Errors, 15 minutes(42),
Threshold Crossing Alert: Far End Errored Seconds, 15 minutes(43),
Threshold Crossing Alert: Far End Severely Errored Seconds, 15 minutes(44),
Threshold Crossing Alert: Far End Background Block Errors, 15 minutes(45),
Threshold Crossing Alert: Near end Corrected errors, 15 minutes(46),
Threshold Crossing Alert: Near End Errored seconds, 1 Day(47),
Threshold Crossing Alert: Near End Severely Errored seconds, 1 Day(48),
Threshold Crossing Alert: Near End Background Block Errors, 1 Day(49),
Threshold Crossing Alert: Far End Errored seconds, 1 Day(50),
Threshold Crossing Alert: Far End Severely Errored seconds, 1 Day(51),
Threshold Crossing Alert: Far End Background Block Errors, 1 Day(52),
Threshold Crossing Alert: Near end Corrected errors, 1 Day(53),
Generic AIS(54),Remote Client Signal Failure(55),
Alarm Indication Signal(56),ODU-Lck Signal(57),
Payload Type Mismatch(58),Unavailable Time(59),
ODU Loss of Signal At Client Port(60),
Missing Fiber Connectivity (61),
High Pre Fec BER (62),
Rx Signal Power High (63),
Rx Signal Power Low (64),
Missing Or Invalid License Key (65),
OTUA LOF (66),
OTUA LOMF (67),
OTUA DEG (68),
OTUA BDI (69),
OTUA High Pre-Fec BER (70)
              
For IfType = OtnOdu following are the alarms and the bit positions 
that will be set (assuming bit positions start from 0)
Alarm Indication Signal(1),ODU-Lck Signal(2),Open Connection indication(3),
Trail Trace ID Mismatch(4),Signal Degraded(5),
Backward Defect Indication(6),Payload Type Mismatch(7)
Generic AIS(8),ODU Loss of Signal At Client Port(9),
ODU Msi Mismatch(10),Low Order ODU Msi Mismatch(11),
Threshold Crossing Alert: Near End Errored Seconds, 15 minutes(12),
Threshold Crossing Alert: Near End Severely Errored Seconds, 15 minutes(13),
Threshold Crossing Alert: Near End Background Block Errors, 15 minutes(14),
Threshold Crossing Alert: Far End Errored Seconds, 15 minutes(15),
Threshold Crossing Alert: Far End Severely Errored Seconds, 15 minutes(16),
Threshold Crossing Alert: Far End Background Block Errors, 15 minutes(17),
Threshold Crossing Alert: Near End Errored seconds, 1 Day(18),
Threshold Crossing Alert: Near End Severely Errored seconds, 1 Day(19),
Threshold Crossing Alert: Near End Background Block Errors, 1 Day(20),
Threshold Crossing Alert: Far End Errored seconds, 1 Day(21),
Threshold Crossing Alert: Far End Severely Errored seconds, 1 Day(22),
Threshold Crossing Alert: Far End Background Block Errors, 1 Day(23),
Unavailable Time(24),Threshold Crossing Alert: Test Sequence Errors, 15 minutes(25),
Threshold Crossing Alert: Test Sequence Errors, 1 day(26),
Key Replacement Failed For 5 months due to IV overflow(27)
Key Rotation Failed (28)
Mic Errors 15M (29)
Decryption Errors 15M (30)
Remote Port Failed (31)
DH Group Mismatch (32)
              
For IfType = EtherPhy following are the alarms and the bit positions 
that will be set (assuming bit positions start from 0)
Broadcast Packets 15M (1),Multicast Packets 15M (2),
Group Address To MAC Ambiguity 15M (3),IGMP Query At Access 15M (4),
Rx Error Octets 15M (5),Tx Utilization Percent 15M (6),
OAM Local Link Event (7),Auto-Negotiation Failed (8),
Ethernet Link Down (9),OAM Discovery Failed (10),
OAM Lost Link (11),OAM Remote Link Fault (12),
OAM Remote Link Fault (13),LF (14),RF (15),
Priority 0 Random Drop Octets Alarm 15M (16),
Priority 1 Random Drop Octets Alarm 15M (17),
Priority 2 Random Drop Octets Alarm 15M (18),
Priority 3 Random Drop Octets Alarm 15M (19),
Priority 4 Random Drop Octets Alarm 15M (20),
Priority 5 Random Drop Octets Alarm 15M (21),
Priority 6 Random Drop Octets Alarm 15M (22),
Priority 7 Random Drop Octets Alarm 15M (23),
Equipment plugged out(24),
Installed equipment differs from the configured one (25),
Built-in test: HW failed(26),Built-in test: HW degraded(27),
Built-in test: HW slightly degraded(28),High Temperature(29),
Input power greater than predetermined threshold(30),
Input power lower than predetermined threshold(31),
Output power greater than predetermined threshold(32),
Output power lower than predetermined threshold(33),
Transceiver bias out of range(34),
Wavelength mismatch(35),Loss of Signal(36)
              
For IfType = UllInterface following are the alarms and the bit positions 
that will be set (assuming bit positions start from 0)
Equipment plugged out(1),Installed equipment differs from the configured one(2)
Built-in test: HW failed(3),Built-in test: HW degraded(4),
Built-in test: HW slightly degraded(5),High Temperature(6),
Input power greater than predetermined threshold(7),
Input power lower than predetermined threshold(8),
Output power greater than predetermined threshold(9),
Output power lower than predetermined threshold(10),
Transceiver bias out of range(11),Wavelength mismatch(12),
Loss of Signal(13),
Threshold Crossing Alert: Near End Errored Seconds, 15 minutes(14),
Threshold Crossing Alert: Near End Severely Errored Seconds, 15 minutes(15),
Threshold Crossing Alert: Near End Background Block Errors, 15 minutes(16),
Threshold Crossing Alert: Far End Errored Seconds, 15 minutes(17),
Threshold Crossing Alert: Far End Severely Errored Seconds, 15 minutes(18),
Threshold Crossing Alert: Far End Background Block Errors, 15 minutes(19),
Threshold Crossing Alert: Near End Errored seconds, 1 Day(20),
Threshold Crossing Alert: Near End Severely Errored seconds, 1 Day(21),
Threshold Crossing Alert: Near End Background Block Errors, 1 Day(22),
Threshold Crossing Alert: Far End Errored seconds, 1 Day(23),
Threshold Crossing Alert: Far End Severely Errored seconds, 1 Day(24),
Threshold Crossing Alert: Far End Background Block Errors, 1 Day(25),
Unavailable Time(26)
              
For IfType = ETY and ETY-OC following are the alarms and the bit positions(assuming bit positions start from 0)
loss of signal (1),syncloss(2),hiber(3),localFail(4),remoteFail(5),gfpLfd(6),gfpUpim(7),gfpPtim(8),gfpExim(9),GfpCsf(10), EqptBitFail(11), EqptBitDegraded(12), EqptBitSlightlyDegraded(13), WavelengthMismatch(14), EqptMismatch(15), EqptOut(16), LaserBiasFault(17), RxPwrHigh(18), RxPwrLow(19), TxPwrHigh(20), TxPwrLow(21), TempHigh(22), PcsUat(23), PcsNeEs15M(24), PcsNeSes15M(25), PcsNeEs1D(26), PcsNeSes1D(27), PcsBip8Errors15M(28), PcsErroredBlock15M(29) , 
RxBadFrames15M (30), TxBadFrames15M (31), MissingFiberConnectivity (32), MissingOrInvalidLicenseKey (33), gfpUat (34), gfpNeEs15M (35), gfpNeSes15M (36)
              
For IfType = FC following are the alarms and the bit positions(assuming bit positions start from 0)
loss of signal (1),syncloss(2),hiber(3),localFail(4),remoteFail(5),gfpLfd(6),gfpUpim(7),gfpPtim(8),gfpExim(9),GfpCsf(10)
              
For IfType = OcInterface following are the alarms and the bit positions 
that will be set (assuming bit positions start from 0)
Equipment plugged out(1),Installed equipment differs from the configured one(2)
Built-in test: HW failed(3),Built-in test: HW degraded(4),
Built-in test: HW slightly degraded(5),High Temperature(6),
Input power greater than predetermined threshold(7),
Input power lower than predetermined threshold(8),
Output power greater than predetermined threshold(9),
Output power lower than predetermined threshold(10),
Transceiver bias out of range(11),Wavelength mismatch(12),
Loss of Signal(13),
Loss of Frame(14),
Trail Trace ID mismatch(15)
              
Threshold Crossing Alert: Near End Errored Seconds, 15 minutes(16),
Threshold Crossing Alert: Near End Severely Errored Seconds, 15 minutes(17),
Threshold Crossing Alert: Near End Code Violations, 15 minutes(18),
Threshold Crossing Alert: Near End Errored seconds, 1 Day(19),
Threshold Crossing Alert: Near End Severely Errored seconds, 1 Day(20),
Threshold Crossing Alert: Near End Severely Errored Seconds, 1 day(21),
Unavailable Time(22),
Fiber connectivity configuration is missing and it may impact traffic(23),
Low input OSNR(24)
MissingOrInvalidLicenseKey (25)
              
For IfType = FcInterface following are the alarms and the bit positions 
that will be set (assuming bit positions start from 0)
Equipment plugged out(1),Installed equipment differs from the configured one(2)
Built-in test: HW failed(3),Built-in test: HW degraded(4),
Built-in test: HW slightly degraded(5),High Temperature(6),
Input power greater than predetermined threshold(7),
Input power lower than predetermined threshold(8),
Output power greater than predetermined threshold(9),
Output power lower than predetermined threshold(10),
Transceiver bias out of range(11),Wavelength mismatch(12),
Loss of Signal(13),
Loss of synchronization(14),
Excessive Line Code Violations(15),
Local Fault(16),
GFP-T Loss of frame(17),
User Payload Identifier mismatch(18),
Payload Type Identifier mismatch alarm(19),
Extension header mismatch(20),
Client signal fail Far-end indication(21),
Threshold Crossing Alert: Near End Errored Seconds, 15 minutes(22),
Threshold Crossing Alert: Near End Severely Errored Seconds, 15 minutes(23),
Threshold Crossing Alert: Near End Background Block Errors, 15 minutes(24),
Threshold Crossing Alert: Near End Errored seconds, 1 Day(25),
Threshold Crossing Alert: Near End Severely Errored seconds, 1 Day(26),
Threshold Crossing Alert: Near End Severely Errored Seconds, 1 Day(27),
Threshold Crossing Alert: Near End Background Block Errors, 15 Day(28),
Unavailable Time(29),
Threshold Crossing Alert: PCS Near End Errored Seconds, 15 minutes(30),
Threshold Crossing Alert: PCS Near End Severely Errored Seconds, 15 minutes(31),
Threshold Crossing Alert: PCS Near End Background Block Errors, 15 minutes(32),
Threshold Crossing Alert: PCS Near End Errored seconds, 1 Day(33),
Threshold Crossing Alert: PCS Near End Severely Errored seconds, 1 Day(34),
Threshold Crossing Alert: PCS Near End Severely Errored Seconds, 1 Day(35),
Threshold Crossing Alert: PCS Near End Background Block Errors, 15 Day(36),
PCS Unavailable Time(37),
Threshold Crossing Alert: GFP Near End Errored Seconds, 15 minutes(38),
Threshold Crossing Alert: GFP Near End Severely Errored Seconds, 15 minutes(39),
Threshold Crossing Alert: GFP Near End Background Block Errors, 15 minutes(40),
Threshold Crossing Alert: GFP Near End Errored seconds, 1 Day(41),
Threshold Crossing Alert: GFP Near End Severely Errored seconds, 1 Day(42),
Threshold Crossing Alert: GFP Near End Severely Errored Seconds, 1 Day(43),
Threshold Crossing Alert: GFP Near End Background Block Errors, 15 Day(44),
GFP Unavailable Time(45),
Fiber connectivity configuration is missing and it may impact traffic(46),
Low input OSNR(47),
PCS Errored Block (48),
MissingOrInvalidLicenseKey (49)

MIB

APOLLO-MIB

OID

.1.3.6.1.4.1.5395.3.7.4.1.6

Type

column

Access

readonly

Status

current

Parent

apolloIfEntry

Table

apolloIfTable

Siblings

7