brzaccVLWirelessTrapThreshold

ALVARION-DOT11-WLAN-MIB · .1.3.6.1.4.1.12394.1.1.6.4
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
Applicable to AU/BU only.
A wireless link quality threshold, expressed in % of retransmissions,
for sending the brzaccVLAUWirelessQualityTRAP.   
This trap indicate whether the quality has gone below or 
above the specified threshold.
The Threshold Range: 1 to 100 (%  retransmissions).

Context

MIB
ALVARION-DOT11-WLAN-MIB
OID
.1.3.6.1.4.1.12394.1.1.6.4
Type
scalar
Access
readwrite
Status
current
Parent
brzaccVLAirInterface
Siblings
28

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
brzaccVLESSIDParametersnode-.1.3.6.1.4.1.12394.1.1.6.1
brzaccVLMaxNumOfAssociations
Applicable to AU only. Not applicable to BreezeNET-B products. Sets the upper limit for the number of SUs that can be associated with the AU. Range: For regular AUs (AU-BS, AU-S…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.10
brzaccVLBestAunode-.1.3.6.1.4.1.12394.1.1.6.11
brzaccVLFrequencyDefinitionnode-.1.3.6.1.4.1.12394.1.1.6.12
brzaccVLATPCnode-.1.3.6.1.4.1.12394.1.1.6.13
brzaccVLCellDistanceParametersnode-.1.3.6.1.4.1.12394.1.1.6.15
brzaccVLScanningMode
Applicable to SU/RB only. The scanning mode. In cells where the DFS Option is enabled Scanning Mode is forced to Passive.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.16
brzaccVLAntennaGain
Applicable to all units. Read-write in units where brzaccVLAntennaGainChange is supported. Read-only in units where brzaccVLAntennaGainChange is not supported. The net gain (i…
scalarDisplayString.1.3.6.1.4.1.12394.1.1.6.17
brzaccVLSpectrumAnalysisParametersnode-.1.3.6.1.4.1.12394.1.1.6.18
brzaccVLMaxNumOfAssociationsLimit
Applicable to AU only. Not applicable to BreezeNET-B products. Shows the limit for the number of SUs that can be associated with the AU. For AU-BS, AU-SA, AU if Data Encryptio…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.19
brzaccVLMaximumCellRadius
Applicable to all units. For AU/BU: read-write. In units with SW version 2.0 and up - applicable only when the Cell Distance Mode is set to Manual. The highest distance from th…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.2
brzaccVLDisassociatenode-.1.3.6.1.4.1.12394.1.1.6.20
brzaccVLTxControl
Applicable to AU/BU only. Tx Control of the AU/BU. Starting with version 4.0 it is run-time. For SW version below 4.0 the unit reset itself. If set to ethernetStatusControl, the…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.21
brzaccVLLostBeaconsWatchdogThreshold
Applicable to AU/BU only. The number of unsuccessful consecutive transmissions beacons before Internal refresh is performed. 0 means that the lost beacons watchdog is not …
scalarInteger32.1.3.6.1.4.1.12394.1.1.6.22
brzaccVLTransmitPower
Applicable to all units with SW version 4.0 and higher. The uniform transmit power for all modulation levels. For a specific modulation level the effective transmit power (brzaccV…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.23
brzaccVLMaximumTxPower
Applicable to only SU/RB with SW version 4.0 and higher. The Maximum Transmit Power for all modulation levels. The Maximum Transmit Power for a specific modulation level is the m…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.24
brzaccVLCountryCodeParametersnode-.1.3.6.1.4.1.12394.1.1.6.25
brzaccVLNoiseImmunityParametersnode-.1.3.6.1.4.1.12394.1.1.6.26
brzaccVLNewTransmitPowerTable
Applicable to all units with SW version 5.1 and higher A table of transmit power parameters.
table-.1.3.6.1.4.1.12394.1.1.6.27
brzaccVLNewMaximumTransmitPowerTable
Applicable to SU/RB only. A table of maximum transmit power parameters.
table-.1.3.6.1.4.1.12394.1.1.6.28
brzaccVLNoiseFloorCalculationParametersnode-.1.3.6.1.4.1.12394.1.1.6.29
brzaccVLAIFS
Applicable to AU and SU. Not applicable to BreezeNET-B products. Not applicable if Wireless Link Prioritization is enabled. Arbitration Inter-Frame Spacing (AIFS) value, in slots.…
scalarInteger32.1.3.6.1.4.1.12394.1.1.6.3
brzaccVLNoiseFloorCalibrationParametersnode-.1.3.6.1.4.1.12394.1.1.6.30
brzaccVLInterferenceMitigationParametersnode-.1.3.6.1.4.1.12394.1.1.6.31
brzaccVLBeaconPeriod
Applicable only to AU VL. Range: 16-160 miliseconds.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.32
brzaccVLMaxBeaconsLost
Applicable only to AU VL. Range: 3-64.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.33
brzaccVLTransmitPowerTable
Applicable to all units. A table of transmit power parameters.
table-.1.3.6.1.4.1.12394.1.1.6.5
brzaccVLMaximumTransmitPowerTable
Applicable to SU/RB only. A table of maximum transmit power parameters.
table-.1.3.6.1.4.1.12394.1.1.6.6