brzaccVLNoiseFloorCalibrationParameters

ALVARION-DOT11-WLAN-MIB · .1.3.6.1.4.1.12394.1.1.6.30
MIB view Table view

Object

node

No description available.

Context

MIB
ALVARION-DOT11-WLAN-MIB
OID
.1.3.6.1.4.1.12394.1.1.6.30
Type
node
Parent
brzaccVLAirInterface
Siblings
28
Children
6

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
brzaccVLESSIDParametersnode-.1.3.6.1.4.1.12394.1.1.6.1
brzaccVLMaxNumOfAssociations
Applicable to AU only. Not applicable to BreezeNET-B products. Sets the upper limit for the number of SUs that can be associated with the AU. Range: For regular AUs (AU-BS, AU-S…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.10
brzaccVLBestAunode-.1.3.6.1.4.1.12394.1.1.6.11
brzaccVLFrequencyDefinitionnode-.1.3.6.1.4.1.12394.1.1.6.12
brzaccVLATPCnode-.1.3.6.1.4.1.12394.1.1.6.13
brzaccVLCellDistanceParametersnode-.1.3.6.1.4.1.12394.1.1.6.15
brzaccVLScanningMode
Applicable to SU/RB only. The scanning mode. In cells where the DFS Option is enabled Scanning Mode is forced to Passive.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.16
brzaccVLAntennaGain
Applicable to all units. Read-write in units where brzaccVLAntennaGainChange is supported. Read-only in units where brzaccVLAntennaGainChange is not supported. The net gain (i…
scalarDisplayString.1.3.6.1.4.1.12394.1.1.6.17
brzaccVLSpectrumAnalysisParametersnode-.1.3.6.1.4.1.12394.1.1.6.18
brzaccVLMaxNumOfAssociationsLimit
Applicable to AU only. Not applicable to BreezeNET-B products. Shows the limit for the number of SUs that can be associated with the AU. For AU-BS, AU-SA, AU if Data Encryptio…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.19
brzaccVLMaximumCellRadius
Applicable to all units. For AU/BU: read-write. In units with SW version 2.0 and up - applicable only when the Cell Distance Mode is set to Manual. The highest distance from th…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.2
brzaccVLDisassociatenode-.1.3.6.1.4.1.12394.1.1.6.20
brzaccVLTxControl
Applicable to AU/BU only. Tx Control of the AU/BU. Starting with version 4.0 it is run-time. For SW version below 4.0 the unit reset itself. If set to ethernetStatusControl, the…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.21
brzaccVLLostBeaconsWatchdogThreshold
Applicable to AU/BU only. The number of unsuccessful consecutive transmissions beacons before Internal refresh is performed. 0 means that the lost beacons watchdog is not …
scalarInteger32.1.3.6.1.4.1.12394.1.1.6.22
brzaccVLTransmitPower
Applicable to all units with SW version 4.0 and higher. The uniform transmit power for all modulation levels. For a specific modulation level the effective transmit power (brzaccV…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.23
brzaccVLMaximumTxPower
Applicable to only SU/RB with SW version 4.0 and higher. The Maximum Transmit Power for all modulation levels. The Maximum Transmit Power for a specific modulation level is the m…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.24
brzaccVLCountryCodeParametersnode-.1.3.6.1.4.1.12394.1.1.6.25
brzaccVLNoiseImmunityParametersnode-.1.3.6.1.4.1.12394.1.1.6.26
brzaccVLNewTransmitPowerTable
Applicable to all units with SW version 5.1 and higher A table of transmit power parameters.
table-.1.3.6.1.4.1.12394.1.1.6.27
brzaccVLNewMaximumTransmitPowerTable
Applicable to SU/RB only. A table of maximum transmit power parameters.
table-.1.3.6.1.4.1.12394.1.1.6.28
brzaccVLNoiseFloorCalculationParametersnode-.1.3.6.1.4.1.12394.1.1.6.29
brzaccVLAIFS
Applicable to AU and SU. Not applicable to BreezeNET-B products. Not applicable if Wireless Link Prioritization is enabled. Arbitration Inter-Frame Spacing (AIFS) value, in slots.…
scalarInteger32.1.3.6.1.4.1.12394.1.1.6.3
brzaccVLInterferenceMitigationParametersnode-.1.3.6.1.4.1.12394.1.1.6.31
brzaccVLBeaconPeriod
Applicable only to AU VL. Range: 16-160 miliseconds.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.32
brzaccVLMaxBeaconsLost
Applicable only to AU VL. Range: 3-64.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.33
brzaccVLWirelessTrapThreshold
Applicable to AU/BU only. A wireless link quality threshold, expressed in % of retransmissions, for sending the brzaccVLAUWirelessQualityTRAP. This trap indicate whether the qu…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.4
brzaccVLTransmitPowerTable
Applicable to all units. A table of transmit power parameters.
table-.1.3.6.1.4.1.12394.1.1.6.5
brzaccVLMaximumTransmitPowerTable
Applicable to SU/RB only. A table of maximum transmit power parameters.
table-.1.3.6.1.4.1.12394.1.1.6.6
Child Objects
ObjectTypeSyntaxOID
brzaccVLNoiseFloorRunCalibration
Not applicable to 900 MHz units. Start calibration process for Noise Floor Indication. The unit will rest itself, will perform calibration and after that will reset again. The s…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.30.1
brzaccVLNoiseFloorFieldCalibrationStatus
Applicable to all units. Defines weather the unit is currently under performing a noise floor indication calibration.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.30.2
brzaccVLNoiseFloorLastFieldCalibrationResult
Applicable to all units. Return the status of last calibration of Noise Floor Indication that was performed.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.30.3
brzaccVLNoiseFloorBandwidthUsedForLastFieldCalibration
Applicable to all units. Return the bandwidth used for last successful calibration of Noise Floor Indication.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.30.4
brzaccVLNoiseFloorAvailableCalibrationOptions
Applicable to all units. Indicates what types of Noise Floor Indication calibration are available: notCalibrated: means that the unit is not calibrated factoryOnly: means that the…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.30.5
brzaccVLNoiseFloorUseCalibration
Not applicable to 900 MHz units. Select if the Noise Floor reported by the unit is using the calibration of Noise Floor Indication. The value that can be choose are according wit…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.30.6