brzaccVLMinContentionWindow
ALVARION-DOT11-WLAN-MIB ·
.1.3.6.1.4.1.12394.1.1.10.3
Object
Applicable to SU and AU. For units bearing SW version 4.0 and above applicable to BreezeNET-B products, for previous SW versions not applicable to BreezeNET-B products. The initial value to be used by the contention window calculation algorithm. Value must be 0 or power of 2 minus 1 (7,15,31...). Range: 0 to 1023, excluding 1 and 3. BreezeNET-B products with SW version below 4.0 return 65535.
Context
- MIB
- ALVARION-DOT11-WLAN-MIB
- OID
.1.3.6.1.4.1.12394.1.1.10.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- brzaccVLPerformanceParams
- Siblings
- 12
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLRTSThreshold Applicable to SU and AU.
Not applicable to BreezeNET-B products.
The minimum frame size that requires an RTS/CTS handshake.
Range: For units bearing SW version 3.0 a… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.10.1 |
| brzaccVLBurstMode | node | - | .1.3.6.1.4.1.12394.1.1.10.10 |
| brzaccVLConcatenationParameters | node | - | .1.3.6.1.4.1.12394.1.1.10.11 |
| brzaccVLControlModulationLevel Applicable to all units wits software version 6.0 and higher.
The modulation level for control frames.
basicRates(1) means the all control frames will be sent at basic rate and
mo… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.10.13 |
| brzaccVLEthernetFrameSize Applicable only for BNB-10 products.
The maximum frame size used on Ethernet port. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.10.14 |
| brzaccVLRunningEthernetFrameSize Applicable only for BNB-10 products.
The frame size used on Ethernet port. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.10.15 |
| brzaccVLMaxContentionWindow Applicable to SU and AU.
For units bearing SW version 4.0 and above applicable to
BreezeNET-B products, for previous SW versions not applicable
to BreezeNET-B products.
The ma… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.10.4 |
| brzaccVLMaximumModulationLevel Applicable to all units.
If the Adaptive Modulation algorithm is enabled, it sets the
Maximum Modulation Level to be used.
If The Modulation algorithm is disabled, it sets the Fi… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.10.5 |
| brzaccVLMulticastModulationLevel Applicable to AU/BU only.
The modulation level for multicast and broadcast data frames.
The range is 1 to 8.
8 is not applicable for units with HW revision A. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.10.6 |
| brzaccVLAvgSNRMemoryFactor Applicable to all units.
The weight of history in average SNR calculation.
The higher is the value, the higher is the weight of history.
Range: -1 (Disregard History) to 32. | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.10.7 |
| brzaccVLHardwareRetries Applicable to all units.
Not applicable if Wireless Link Prioritization is enabled.
The maximum number of trials to transmit an unacknowledged
frame in each Hardware Retrial phas… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.10.8 |
| brzaccVLAdaptiveModulationParams | node | - | .1.3.6.1.4.1.12394.1.1.10.9 |