brzaccVLLostBeaconsWatchdogThreshold
ALVARION-DOT11-WLAN-MIB ·
.1.3.6.1.4.1.12394.1.1.6.22
Object
scalar
r/w
Integer32
Applicable to AU/BU only. The number of unsuccessful consecutive transmissions beacons before Internal refresh is performed. 0 means that the lost beacons watchdog is not used and internal refresh is not performed.
Context
- MIB
- ALVARION-DOT11-WLAN-MIB
- OID
.1.3.6.1.4.1.12394.1.1.6.22- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- brzaccVLAirInterface
- Siblings
- 28
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-0
range: 100-1000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLESSIDParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.1 |
| brzaccVLMaxNumOfAssociations Applicable to AU only.
Not applicable to BreezeNET-B products.
Sets the upper limit for the number of SUs
that can be associated with the AU.
Range: For regular AUs (AU-BS, AU-S… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.10 |
| brzaccVLBestAu | node | - | .1.3.6.1.4.1.12394.1.1.6.11 |
| brzaccVLFrequencyDefinition | node | - | .1.3.6.1.4.1.12394.1.1.6.12 |
| brzaccVLATPC | node | - | .1.3.6.1.4.1.12394.1.1.6.13 |
| brzaccVLCellDistanceParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.15 |
| brzaccVLScanningMode Applicable to SU/RB only.
The scanning mode. In cells where the DFS Option is enabled
Scanning Mode is forced to Passive. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.16 |
| brzaccVLAntennaGain Applicable to all units. Read-write in units where
brzaccVLAntennaGainChange is supported.
Read-only in units where brzaccVLAntennaGainChange is not supported.
The net gain (i… | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.17 |
| brzaccVLSpectrumAnalysisParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.18 |
| brzaccVLMaxNumOfAssociationsLimit Applicable to AU only.
Not applicable to BreezeNET-B products.
Shows the limit for the number of SUs that can be associated
with the AU.
For AU-BS, AU-SA, AU if Data Encryptio… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.19 |
| brzaccVLMaximumCellRadius Applicable to all units.
For AU/BU: read-write. In units with SW version 2.0 and up -
applicable only when the Cell Distance Mode is set to Manual.
The highest distance from th… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.2 |
| brzaccVLDisassociate | node | - | .1.3.6.1.4.1.12394.1.1.6.20 |
| brzaccVLTxControl Applicable to AU/BU only.
Tx Control of the AU/BU.
Starting with version 4.0 it is run-time.
For SW version below 4.0 the unit reset itself.
If set to ethernetStatusControl, the… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.21 |
| brzaccVLTransmitPower Applicable to all units with SW version 4.0 and higher.
The uniform transmit power for all modulation levels. For a specific
modulation level the effective transmit power (brzaccV… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.23 |
| brzaccVLMaximumTxPower Applicable to only SU/RB with SW version 4.0 and higher.
The Maximum Transmit Power for all modulation levels.
The Maximum Transmit Power for a specific modulation level is the
m… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.24 |
| brzaccVLCountryCodeParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.25 |
| brzaccVLNoiseImmunityParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.26 |
| brzaccVLNewTransmitPowerTable Applicable to all units with SW version 5.1 and higher
A table of transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.27 |
| brzaccVLNewMaximumTransmitPowerTable Applicable to SU/RB only.
A table of maximum transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.28 |
| brzaccVLNoiseFloorCalculationParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.29 |
| brzaccVLAIFS Applicable to AU and SU. Not applicable to BreezeNET-B products.
Not applicable if Wireless Link Prioritization is enabled.
Arbitration Inter-Frame Spacing (AIFS) value, in slots.… | scalar | Integer32 | .1.3.6.1.4.1.12394.1.1.6.3 |
| brzaccVLNoiseFloorCalibrationParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.30 |
| brzaccVLInterferenceMitigationParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.31 |
| brzaccVLBeaconPeriod Applicable only to AU VL.
Range: 16-160 miliseconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.32 |
| brzaccVLMaxBeaconsLost Applicable only to AU VL.
Range: 3-64. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.33 |
| brzaccVLWirelessTrapThreshold Applicable to AU/BU only.
A wireless link quality threshold, expressed in % of retransmissions,
for sending the brzaccVLAUWirelessQualityTRAP.
This trap indicate whether the qu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.4 |
| brzaccVLTransmitPowerTable Applicable to all units.
A table of transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.5 |
| brzaccVLMaximumTransmitPowerTable Applicable to SU/RB only.
A table of maximum transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.6 |