brzaccVLInterferenceMitigationParameters
ALVARION-DOT11-WLAN-MIB ·
.1.3.6.1.4.1.12394.1.1.6.31
Object
node
No description available.
Context
- MIB
- ALVARION-DOT11-WLAN-MIB
- OID
.1.3.6.1.4.1.12394.1.1.6.31- Type
- node
- Parent
- brzaccVLAirInterface
- Siblings
- 28
- Children
- 16
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLESSIDParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.1 |
| brzaccVLMaxNumOfAssociations Applicable to AU only.
Not applicable to BreezeNET-B products.
Sets the upper limit for the number of SUs
that can be associated with the AU.
Range: For regular AUs (AU-BS, AU-S… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.10 |
| brzaccVLBestAu | node | - | .1.3.6.1.4.1.12394.1.1.6.11 |
| brzaccVLFrequencyDefinition | node | - | .1.3.6.1.4.1.12394.1.1.6.12 |
| brzaccVLATPC | node | - | .1.3.6.1.4.1.12394.1.1.6.13 |
| brzaccVLCellDistanceParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.15 |
| brzaccVLScanningMode Applicable to SU/RB only.
The scanning mode. In cells where the DFS Option is enabled
Scanning Mode is forced to Passive. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.16 |
| brzaccVLAntennaGain Applicable to all units. Read-write in units where
brzaccVLAntennaGainChange is supported.
Read-only in units where brzaccVLAntennaGainChange is not supported.
The net gain (i… | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.17 |
| brzaccVLSpectrumAnalysisParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.18 |
| brzaccVLMaxNumOfAssociationsLimit Applicable to AU only.
Not applicable to BreezeNET-B products.
Shows the limit for the number of SUs that can be associated
with the AU.
For AU-BS, AU-SA, AU if Data Encryptio… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.19 |
| brzaccVLMaximumCellRadius Applicable to all units.
For AU/BU: read-write. In units with SW version 2.0 and up -
applicable only when the Cell Distance Mode is set to Manual.
The highest distance from th… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.2 |
| brzaccVLDisassociate | node | - | .1.3.6.1.4.1.12394.1.1.6.20 |
| brzaccVLTxControl Applicable to AU/BU only.
Tx Control of the AU/BU.
Starting with version 4.0 it is run-time.
For SW version below 4.0 the unit reset itself.
If set to ethernetStatusControl, the… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.21 |
| brzaccVLLostBeaconsWatchdogThreshold Applicable to AU/BU only.
The number of unsuccessful consecutive transmissions beacons
before Internal refresh is performed.
0 means that the lost beacons watchdog is not
… | scalar | Integer32 | .1.3.6.1.4.1.12394.1.1.6.22 |
| brzaccVLTransmitPower Applicable to all units with SW version 4.0 and higher.
The uniform transmit power for all modulation levels. For a specific
modulation level the effective transmit power (brzaccV… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.23 |
| brzaccVLMaximumTxPower Applicable to only SU/RB with SW version 4.0 and higher.
The Maximum Transmit Power for all modulation levels.
The Maximum Transmit Power for a specific modulation level is the
m… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.24 |
| brzaccVLCountryCodeParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.25 |
| brzaccVLNoiseImmunityParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.26 |
| brzaccVLNewTransmitPowerTable Applicable to all units with SW version 5.1 and higher
A table of transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.27 |
| brzaccVLNewMaximumTransmitPowerTable Applicable to SU/RB only.
A table of maximum transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.28 |
| brzaccVLNoiseFloorCalculationParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.29 |
| brzaccVLAIFS Applicable to AU and SU. Not applicable to BreezeNET-B products.
Not applicable if Wireless Link Prioritization is enabled.
Arbitration Inter-Frame Spacing (AIFS) value, in slots.… | scalar | Integer32 | .1.3.6.1.4.1.12394.1.1.6.3 |
| brzaccVLNoiseFloorCalibrationParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.30 |
| brzaccVLBeaconPeriod Applicable only to AU VL.
Range: 16-160 miliseconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.32 |
| brzaccVLMaxBeaconsLost Applicable only to AU VL.
Range: 3-64. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.33 |
| brzaccVLWirelessTrapThreshold Applicable to AU/BU only.
A wireless link quality threshold, expressed in % of retransmissions,
for sending the brzaccVLAUWirelessQualityTRAP.
This trap indicate whether the qu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.4 |
| brzaccVLTransmitPowerTable Applicable to all units.
A table of transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.5 |
| brzaccVLMaximumTransmitPowerTable Applicable to SU/RB only.
A table of maximum transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.6 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLInterferenceMitigationChannelScanPeriod Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The period of time, in seconds, to stay on each channel to gather information,
when performing Interference Mitigation or S… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.31.1 |
| brzaccVLInterferenceMitigationDeleteStatisticsFile Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Deletes the Interference Mitigation statistics file. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.31.10 |
| brzaccVLInterferenceMitigationModel Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Specifies the Installation Model used by the cell. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.31.11 |
| brzaccVLInterferenceMitigationScanTime Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Displays the estimated value of the scan time. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.31.12 |
| brzaccVLInterferenceMitigationAUheight Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The Base Station height used in determining
the best noise floor in the Interference
Mitigation algorithm. Range: 0 - 300 met… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.31.13 |
| brzaccVLInterferenceMitigationAntennaGain Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The Antenna Gain of the pair unit (AU/SU),
expressed in dBi. Range: 10 - 17 dBi. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.31.14 |
| brzaccVLInterferenceMitigationMaxModulation Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The maximum modulation of the pair untit.
Range: 1 - 8. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.31.15 |
| brzaccVLInterferenceMitigationKeepLink Applicable to 900 MHz AU units, 2.4 GHz AU units and BNB10.
Activates the KeepLink procedure in order to not
lose SUs near the border of the cell | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.31.16 |
| brzaccVLInterferenceMitigationOutputTable Applicable to 900 MHz units, 2.4 GHz units and BNB10.
A table of Clear Channel Selection or Automatic Noise Floor Selection results. | table | - | .1.3.6.1.4.1.12394.1.1.6.31.17 |
| brzaccVLInterferenceMitigationAutomaticScanPeriod Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The period of time, in minutes, to execute automatic channel scanning,
when performing Interference Mitigation.
Range: 0 or … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.31.2 |
| brzaccVLInterferenceMitigationScanType Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The selected method for scanning,
when performing Interference Mitigation. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.31.3 |
| brzaccVLInterferenceMitigationScanMode Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The selected Optimization Criteria to choose the best result,
when performing Interference Mitigation:
1 = best throughput… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.31.4 |
| brzaccVLInterferenceMitigationDistance Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The desired value of Maximum Distance, utilized if
Optimization Criteria is set to best distance,
when performing Interferen… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.31.5 |
| brzaccVLInterferenceMitigationThroughput Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The desired value of Throughput, utilized if
Optimization Criteria is set to best throughput,
when performing Interference M… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.31.6 |
| brzaccVLInterferenceMitigationActivation Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Activates Interference Mitigation, the unit is automatically reset upon
activation. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.31.8 |
| brzaccVLInterferenceMitigationStatus Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Defines whether the unit is currently performing
an Interference Mitigation process.
Value currentlyBlocked means unit curre… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.31.9 |