brzaccVLDFSMoveFreq
ALVARION-DOT11-WLAN-MIB ·
.1.3.6.1.4.1.12394.1.1.14.11
Object
scalar
SNMPv2-SMIInteger32
Applicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLTrapDFSMoveFreq New to support a resolution of 0.5 MHz). The new frequency in MHz after detecting radar on a previous channel.
Context
- MIB
- ALVARION-DOT11-WLAN-MIB
- OID
.1.3.6.1.4.1.12394.1.1.14.11- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- brzaccVLTraps
- Siblings
- 19
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLTrapSUMacAddr Applicable to AU/BU only.
SU/RB MAC Address. | scalar | MacAddress | .1.3.6.1.4.1.12394.1.1.14.1 |
| brzaccVLTrapFtpOrTftpStatus Applicable to all units.
The status of the last FTP/TFTP loading procedure. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.14.10 |
| brzaccVLDFSMoveFreqNew Applicable to AU/BU.
The new frequency in MHz after detecting radar on a previous channel.
(Replaces brzaccVLDFSMoveFreq to support a resolution of 0.5 MHz for
units with HW re… | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.14.12 |
| brzaccVLEthBroadcastThresholdExceeded Applicable to all units.
The number of packets that are dropped by the ethernet broadcast/multicast limiter. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.14.13 |
| brzaccVLTrapSubscriberType Applicable to AUS only.
The type of subscriber that was rejected by AUS | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.14.14 |
| brzaccVLTrapMACAddress Applicable to BU/RB only.
The MAC address of the BNET B unit whose type has been changed | scalar | MacAddress | .1.3.6.1.4.1.12394.1.1.14.15 |
| brzaccVLNewUnitTypeTrap Applicable to BU/RB only.
The new type of the BNET B unit. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.14.16 |
| brzaccVLTrapSWVersion The SW version of the SU that tries to associate
with a station that has Wireless Link Prioritization Enabled | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.14.17 |
| brzaccVLTrapSequenceNumber Apllicable to AU/BU only.
Trap Variable indicating the sequence number of the last trap generated. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.14.18 |
| brzaccVLTrapUnitMacAddr Applicable to all units.
The MAC Address of the unit that is initiating the trap. | scalar | MacAddress | .1.3.6.1.4.1.12394.1.1.14.19 |
| brzaccVLTrapParameterGroupCode Applicable to AU/BU only.
The code of group parameter that was changed. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.14.20 |
| brzaccVLTrapNewIP Applicable to AU/BU only.
The code of group parameter that was changed. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.12394.1.1.14.21 |
| brzaccVLTrapText Textual string for future use. | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.14.3 |
| brzaccVLTrapToggle Applicable to AU/BU only.
An On/Off toggle status. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.14.4 |
| brzaccVLTrapParameterChanged Not applicable starting with version 5.0.
Applicable to all units.
A modification to one of the parameters related to CIR/MIR,
IP Filtering or VLAN. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.14.5 |
| brzaccVLTrapAccessRights Applicable to all units.
The access rights used for login. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.14.6 |
| brzaccVLTrapLog Applicable to all units.
Login or logout to the Monitor program via Telnet. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.14.7 |
| brzaccVLTrapTelnetUserIpAddress Applicable to all units.
The IP address of a Telnet user. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.12394.1.1.14.8 |
| brzaccVLTrapRTx Applicable to AU/BU only.
Retransmissions as a percentage of total transmissions. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.14.9 |