brzaccVLAdaptiveModulationHistorySize

ALVARION-DOT11-WLAN-MIB · .1.3.6.1.4.1.12394.1.1.10.9.7
MIB view Table view

Object

scalar r/w Integer32 
Applicable to all units with HW version C or higher. 
This value is used to compute the transmission time.
Not used in version 6.0 and higher.

Context

MIB
ALVARION-DOT11-WLAN-MIB
OID
.1.3.6.1.4.1.12394.1.1.10.9.7
Type
scalar
Access
readwrite
Status
current
Parent
brzaccVLAdaptiveModulationParams
Siblings
10

Syntax

Integer32

Values & Constraints

Object Constraints
range: 15-25

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
brzaccVLAdaptiveModulationAlgorithmOption
Applicable to all units. Enables/disables the adaptive modulation level decision mechanism.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.10.9.1
brzaccVLAdaptiveModulationAlgorithm
Applicable to all units with HW version C or higher. Defines the adaptive modulation algorithm used by the unit.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.10.9.10
brzaccVLAdaptiveModulationRetriesOnLowerModulations
Applicable to all units with HW version C or higher. It allows retransmissions at lower modulation levels.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.10.9.11
brzaccVLAdaptiveModulationRTSDurationMode
Applicable to all units with HW version C or higher. It defines the mode to calculate the value for RTS duration field.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.10.9.12
brzaccVLSoftwareRetrySupport
Applicable to all units. Read-only for units with version 2.0. Not applicable for units with SW version 3.0 and higher. The status of the Software Retry mechanism. Enabled whe…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.10.9.2
brzaccVLNumOfSoftwareRetries
Applicable to all units. Read-only for units with version 2.0. Not applicable for units with SW version 3.0 and higher. The maximum number of times to use the Software Retry me…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.10.9.3
brzaccVLMinIntervalBetweenAdaptiveModulationAlgorithmMessages
Applicable all units. The minimum interval between two consecutive AU/BU to SU/RB messages. Range: 1 to 3600 (Sec).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.10.9.4
brzaccVLAdaptiveModulationDecisionThresholds
Applicable to all units. Defines the setting of thresholds for the rate decision algorithm. high (2) should typically be used when the SNR is lower than 13dB.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.10.9.5
brzaccVLAdaptiveModulationPacketThresholdToTestUpRate
Applicable to all units with HW version C or higher. When the number of transmitted frames exceeds this number the upper modulations will be tested.
scalarInteger32.1.3.6.1.4.1.12394.1.1.10.9.8
brzaccVLAdaptiveModulationPacketNoOnUpperRate
Applicable to all units with HW version C or higher. The number of frames used on upper modulations.
scalarInteger32.1.3.6.1.4.1.12394.1.1.10.9.9