aluSecPlcyParamsConfigMatchIcmpCode
ALU-SECURITY-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.20
Object
column
r/w
Integer32
Icmp code to be matched. aluSecPlcyParamsConfigMatchIcmpCode complements the object aluSecPlcyParamsConfigMatchIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled.
Context
- MIB
- ALU-SECURITY-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aluSecPlcyParamsConfigEntry
- Table
- aluSecPlcyParamsConfigTable
- Siblings
- 31
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluSecPlcyParamsConfigRuleId The value of aluSecPlcyParamsConfigRuleId specifies the
index of the rule within the security policy. | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.1 |
| aluSecPlcyParamsConfigMatchDstIPOperator The operator specifies the manner in which
aluSecPlcyParamsConfigMatchDstIPAddrValue1 and
aluSecPlcyParamsConfigMatchDstIPAddrValue2
are to be used. The value of these below 2 ob… | column | TIPOperator | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.10 |
| aluSecPlcyParamsConfigMatchDstIPHostGroup The value of the object aluSecPlcyParamsConfigMatchDstIPHostGroup
specifies the host group name, where the group name is a collection
of IP addresses. When configured and activ… | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.11 |
| aluSecPlcyParamsConfigMatchProtocol IP protocol to match. set to -1 to disable matching IP protocol. If
the protocol is changed the protocol specific parameters are reset. | column | TIMETRA-TC-MIBTIpProtocol | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.12 |
| aluSecPlcyParamsConfigMatchSrcPortValue1 Source TCP/UDP port value. | column | TIMETRA-TC-MIBTTcpUdpPort | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.13 |
| aluSecPlcyParamsConfigMatchSrcPortValue2 Source TCP/UDP port value. | column | TIMETRA-TC-MIBTTcpUdpPort | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.14 |
| aluSecPlcyParamsConfigMatchSrcPortOp Source TCP/UDP port operator. | column | TIMETRA-TC-MIBTOperator | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.15 |
| aluSecPlcyParamsConfigMatchDstPortValue1 Destination TCP/UDP port value. | column | TIMETRA-TC-MIBTTcpUdpPort | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.16 |
| aluSecPlcyParamsConfigMatchDstPortValue2 Destination TCP/UDP port value. | column | TIMETRA-TC-MIBTTcpUdpPort | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.17 |
| aluSecPlcyParamsConfigMatchDstPortOp Destination TCP/UDP port operator. | column | TIMETRA-TC-MIBTOperator | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.18 |
| aluSecPlcyParamsConfigMatchAppGroup The value of the object aluSecPlcyParamsConfigMatchAppGroup
specifies the application group name, where the group name is a
collection of protocol-id/src port/dest port. When c… | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.19 |
| aluSecPlcyParamsConfigRowStatus The value of aluSecPlcyParamsConfigRowStatus specifies the
row status. It allows entries to be created and deleted in the
aluSecPlcyParamsConfigTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.2 |
| aluSecPlcyParamsConfigMatchIcmpType Icmp type to be matched. aluSecPlcyParamsConfigMatchIcmpType
complements the object aluSecPlcyParamsConfigMatchIcmpCode.
Both of them need to be set to actually
enable ICMP matc… | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.21 |
| aluSecPlcyParamsConfigMatchIgmpType Type of IGMP to be configured | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.22 |
| aluSecPlcyParamsConfigMatchFlowDirection This object specifies the direction of the packet flow
for which the security filter is to be applied.
in is equivalent to ingress flow,
out is equivalent to egress flow,
both is … | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.23 |
| aluSecPlcyParamsConfigProfileId The value of the object specifies profile of this flow | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.24 |
| aluSecPlcyParamsConfigConcurrentFlowLimit The value of the object specifies the number of sessions (flows)
that can be active concurrently. | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.25 |
| aluSecPlcyParamsConfigCreateRevDirFlow The value of aluSecPlcyParamsConfigCreateRevDirFlow specifies
whether return direction of the session is created or not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.26 |
| aluSecPlcyParamsConfigAction This object specifies whether the packet needs to be
passed or dropped if it satisfies the rule condition. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.27 |
| aluSecPlcyParamsConfigMatchLocal The value of aluSecPlcyParamsConfigMatchLocal specifies
whether to match traffic destined to node | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.28 |
| aluSecPlcyParamsConfigActionNatDstIPAddr The value of the object aluSecPlcyParamsConfigActionNatDstIPAddr
specifies the Dst IP address of the packet after NAT has been
performed | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.29 |
| aluSecPlcyParamsConfigDescription Description of this rule. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.3 |
| aluSecPlcyParamsConfigActionNatDstPort NAT Destination TCP/UDP port value. | column | TIMETRA-TC-MIBTTcpUdpPort | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.30 |
| aluSecPlcyParamsConfigLogControl Log control for this rule. There are three options:
(1) suppress - (DEFAULT) Any events generated from this
rule will be suppressed.
(2) zone - Send any event… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.31 |
| aluSecPlcyParamsConfigLogId Log for policy to be logged. This can only be set | column | TSecurityLogId | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.32 |
| aluSecPlcyParamsConfigMatchSrcIPAddrValue1 The value of the object aluSecPlcyParamsConfigMatchSrcIPAddrValue1
specifies the source IP address of the packets to be filltered.
When configured and activated, This filter will … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.4 |
| aluSecPlcyParamsConfigMatchSrcIPAddrValue2 The value of the object aluSecPlcyParamsConfigMatchSrcIPAddrValue2
specifies the source IP address of the packets to be filltered.
When configured and activated, This filter will… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.5 |
| aluSecPlcyParamsConfigMatchSrcIPOperator The operator specifies the manner in which
aluSecPlcyParamsConfigMatchSrcIPAddrValue1 and
aluSecPlcyParamsConfigMatchSrcIPAddrValue2
are to be used. The value of these below 2 ob… | column | TIPOperator | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.6 |
| aluSecPlcyParamsConfigMatchSrcIPHostGroup The value of the object aluSecPlcyParamsConfigMatchSrcIPHostGroup
specifies the host group name, where the group name is a collection
of IP addresses. When configured and activ… | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.7 |
| aluSecPlcyParamsConfigMatchDstIPAddrValue1 The value of the object aluSecPlcyParamsConfigMatchDstIPAddrValue1
specifies the source IP address of the packets to be filltered.
When configured and activated, This filter will … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.8 |
| aluSecPlcyParamsConfigMatchDstIPAddrValue2 The value of the object aluSecPlcyParamsConfigMatchDstIPAddrValue2
specifies the source IP address of the packets to be filltered.
When configured and activated, This filter will… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.6.1.2.2.17.1.9.1.9 |