aluMcPeerFwKeepAliveIntvl
ALU-SECURITY-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.5
Object
column
r/w
deci-seconds Unsigned32
The value of aluMcPeerFwKeepAliveIntvl specifies the interval at which
keep-alive messages are exchanged between two peers participating
in a multi-chassis end-point tunnel (MC-FW).
These keep-alive messages are used to determine remote-node failures.
Context
- MIB
- ALU-SECURITY-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- deci-seconds
- Parent
- aluMcPeerFwEntry
- Table
- aluMcPeerFwTable
- Siblings
- 23
Syntax
deci-seconds Unsigned32
Values & Constraints
Object Constraints
range: 5-500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluMcPeerFwRowStatus The value of aluMcPeerFwRowStatus is used for creation/deletion of
multi-chassis peer end-points. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.1 |
| aluMcPeerFwPeerLastStateChge The value of aluMcPeerFwPeerLastStateChge indicates the sysUpTime
at the time of the last operational state change for this
multi-chassis end-point peer.
If no cha… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.10 |
| aluMcPeerFwRefCount The value of aluMcPeerFwRefCount indicates how many service end-points
are referencing this multi-chassis firewall peer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.11 |
| aluMcPeerFwEncryption The value of aluMcPeerFwEncryption specifies whether encryption
is enabled for this multi-chassis firewall peer. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.12 |
| aluMcPeerFwEncryptionAuthAlg The value of aluMcPeerFwEncryptionAuthAlg specifies the hashing
algorithm used for the AH (Authentication Header) protocol's
authentication function. | column | AluMcFwAuthAlgorithm | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.13 |
| aluMcPeerFwEncryptionEncrAlg The value of aluMcPeerFwEncryptionEncrAlg specifies the
encryptiontion algorithm to be used. Encryptiontion only applies
to ESP(Encapsulating Security Payload) configurations. | column | AluMcFwEncrAlgorithm | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.14 |
| aluMcPeerFwEncryptionActOutSa The value of aluMcPeerFwEncryptionActOutSa specifies the SPI
to be used when performing encryption and authentication
on egressing packets using this MC firewall peer. | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.15 |
| aluMcPeerFwEncryptionSpi1 The value of aluMcPeerFwEncryptionSpi1 specifies the spi of the first security association.
spi 0 means that this security association is invalid | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.16 |
| aluMcPeerFwEncryptionSpiAuthKey1 The value of aluMcPeerFwEncryptionSpiAuthKey1 specifies the key used
for the authentication algorithm defined by the
aluMcPeerFwEncryptionAuthAlg.
The length of the… | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.17 |
| aluMcPeerFwEncryptionSpiEncrKey1 The value of aluMcPeerFwEncryptionSpiEncrKey1 specifies the key used
for the encryption algorithm defined by the
aluMcPeerFwEncryptionEncrAlg.
The length of the key… | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.18 |
| aluMcPeerFwEncryptionSpi2 The value of aluMcPeerFwEncryptionSpi2 specifies the spi of the second security association.
spi 0 means that this security association is invalid | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.19 |
| aluMcPeerFwLastChanged The value of aluMcPeerFwLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last … | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.2 |
| aluMcPeerFwEncryptionSpiAuthKey2 The value of aluMcPeerFwEncryptionSpiAuthKey2 specifies the key used
for the authentication algorithm defined by the
aluMcPeerFwEncryptionAuthAlg.
The length of the… | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.20 |
| aluMcPeerFwEncryptionSpiEncrKey2 The value of aluMcPeerFwEncryptionSpiEncrKey2 specifies the key used
for the encryption algorithm defined by the
aluMcPeerFwEncryptionEncrAlg.
The length of the key… | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.21 |
| aluMcPeerFwElectionRole The value of aluMcPeerFwElectionRole indicates the role
of this multi-chassis firewall peer. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.22 |
| aluMcPeerFwPolicySync The value of aluMcPeerFwPolicySync indicates the state of the
Policy Synchronization flag on this multi-chassis firewall peer. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.23 |
| aluMcPeerFwSessionDBSync The value of aluMcPeerFwSessionDBSync indicates the state of the
Session Database Synchronization flag on this multi-chassis firewall peer. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.24 |
| aluMcPeerFwAdminState The value of aluMcPeerFwAdminState specifies the administrative state
of this multi-chassis peer end-point. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.3 |
| aluMcPeerFwSysPriority The value of aluMcPeerFwSysPriority specifies the system priority
of this multi-chassis peer end-point. | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.4 |
| aluMcPeerFwHoldOnNbrFail The value of aluMcPeerFwHoldOnNbrFail specifies the number of
keep-alive intervals that the local peer will wait for packets from the
multi-chassis end-point peer before assuming … | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.6 |
| aluMcPeerFwBootTimer The value of aluMcPeerFwBootTimer specifies the time the multi-chassis
end-point protocol keeps trying the establish a connection before
assuming a failure of the remote-peer.
… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.7 |
| aluMcPeerFwBfd The value of aluMcPeerFwBfd specifies whether bi-directional
forwarding detection (BFD) is configured for this multi-chassis
end-point peering tunnel. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.8 |
| aluMcPeerFwOperState The value of aluMcPeerFwOperState indicates the operational
status of this multi-chassis end-point peer. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.17.6.2.1.9 |