aluPtpClockHw
ALU-PTPV2-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.4
Object
The unique value which identifies the MDA slot within
the system which is perfoming IEEE 1588 PTP event message
time or frequency recovery processing.
This object is derived when the aluPtpClockIpInterface object
is a non-loopback IP interface. The aluPtpClockHw will
be set to the MDA number of the physical port or '0'
when no physical port is defined.
This object can not be modified if aluPtpClockType is set to
'endToEndTransparent (3)'.
This object must be configured by the user when the
aluPtpClockIpInterface is a loopback IP interface.
Context
- MIB
- ALU-PTPV2-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aluPtpClockEntry
- Table
- aluPtpClockTable
- Siblings
- 14
Syntax
TIMETRA-CHASSIS-MIBTmnxHwIndexOrZero
- Source
- TIMETRA-CHASSIS-MIBTmnxHwIndexOrZero
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluPtpClockIndex The unique value which identifies this IEEE 1588 PTP clock. | column | Alu1588PtpClockIndex | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.1 |
| aluPtpClockTimeRefPriority The value of aluPtpClockTimeRefPriority indicates the relative
priority order of the clock to be used as a source of system time.
The aluPtpClockTimeRefPriority cannot be set to a… | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.10 |
| aluPtpClockAdminFreqSource The value of aluPtpClockAdminFreqSource is the preferred source of
frequency timing for PTP ports that are in the master state.
The default value of aluPtpClockAd… | column | Alu1588PtpFreqSource | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.11 |
| aluPtpClockOperFreqSource The value of aluPtpClockOperFreqSource is the current source of
frequency timing for PTP master ports and for PTP time recovery.
This object is 'unknown(0)' when th… | column | Alu1588PtpFreqSource | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.12 |
| aluPtpClockUseNodeTime The value of aluPtpClockUseNodeTime specifies whether the PTP clock
will utilize the node system time as its time source. This time
is used by ptp-ports in the master state.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.13 |
| aluPtpClockSyncCertaintyState The value of aluPtpClockSyncCertaintyState indicates the
synchronization certainty state of the clock. When the clock is
acting as a Grandmaster (ie. a master only ordinary clock … | column | Alu1588PtpSyncCertaintyState | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.14 |
| aluPtpClockTxWhileUncertain The aluPtpClockTxWhileUncertain specifies whether the PTP clock will
transmit Announce packets while the aluPtpClockSyncCertaintyState is
'uncertain(2)'. A value of 'false(2)' ind… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.15 |
| aluPtpClockRowStatus Row Status of the entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.2 |
| aluPtpClockIpInterface The value of aluPtpClockIpInterface indicates the ip
interface of the IEEE 1588 PTP ordinary/boundary clock. This
interface is used to determine the source IPv4 and/or IPv6
addres… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.3 |
| aluPtpClockProfile The value of aluPtpClockProfile specifies the conformance of the PTP
system to either the default IEEE 1588-2008 behavior, or one of the
ITU-T profiles.
When aluPtp… | column | Alu1588PtpProfile | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.5 |
| aluPtpClockAdminState The value of aluPtpClockAdminState specifies whether PTP 1588 is
enabled on the system. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.6 |
| aluPtpClockDynamicPeers The value of aluPtpClockDynamicPeers specifies whether PTP 1588 allows
peers to be dynamically learned.
aluPtpClockDynamicPeers can not be modified if aluPtpClockTy… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.7 |
| aluPtpClockForwardWeight The value of aluPtpClockForwardWeight represents the percentage that the
forward direction data path is used in the calculations related to
updates to the clock recovery DCO. A … | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.8 |
| aluPtpClockRecoveryState The value of aluPtpClockRecoveryState indicates the
current clock synchronization state of the clock derived from
the IEEE 1588 PTP event messages.
This object is u… | column | Alu1588PtpClockRecoveryState | .1.3.6.1.4.1.6527.6.1.2.2.12.1.2.1.9 |