pethPsePortType
ALU-POWER-ETHERNET-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.13
Object
column
r/w
Enumeration
A manager will set the value of this variable to a value that indicates the type of the device that is connected to theport. This value can be the result of the mapping the address of the station connected to the port and of the value of the pethPdPortType of the respective PD port.
Context
- MIB
- ALU-POWER-ETHERNET-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pethPsePortEntry
- Table
- pethPsePortTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | telephone |
3 | webcam |
4 | wireless |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pethPsePortGroupIndex This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is connected.
Group means box in the stack, module in a rack and the value 1
MUST be … | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.1 |
| pethPsePortPowerMaintenanceStatus The value ok(1) indicates the Power Maintenance
Signature is present and the overcurrent condition has not been
detected.
The value overCurrent (2) indicates an overcurrent condit… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.10 |
| pethPsePortMPSAbsentCounter Counts the number of times that the
pethPsePortPowerMaintenanceStatus attribute changes from any
value to the value mPSAbsent(3). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.11 |
| pethPsePortOverCurrentCounter Counts the number of times that the aPSEPowerCurrentStatus
attribute changes from any value to the value overCurrent(2). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.12 |
| pethPsePortPowerClassifications Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.14 |
| pethPsePortIndex This variable uniquely identifies the power Ethernet PSE
port within group pethPseGroupIndex to which the
power Ethernet PSE entry is connected. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.2 |
| pethPsePortAdminEnable Enables power supply on this port.
Setting this object at a value enable(1) enables power
and detection mechanism for this port.
Setting this object at a value disable(2) disables… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.3 |
| pethPsePortPowerPairsControlAbility Describes the capability of controlling the power pairs
functionality to switch pins for sourcing power.
The value true indicate that the device has the capability
to control the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.4 |
| pethPsePortPowerPairs Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) means that the signal pairs
only are in… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.5 |
| pethPsePortPowerDetectionControl Controls the power detection mechanism of the port.
Setting the value auto(1) enables the power detection
mechanism of the port.
Setting the value test(2) puts the port in a
testm… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.6 |
| pethPsePortDetectionStatus Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram is in
the state IDLE
A value of searching(2)- indicates tha… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.7 |
| pethPsePortPowerPriority This object controls the priority of the port from the point
of view of a power management algorithm. The priority that
is set by this variable could be used by a control mechanis… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.8 |