pethPsePortPowerPriority

ALU-POWER-ETHERNET-MIB · .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.8

MIB view Table view

Object

column r/w Enumeration

This object controls the priority of the port from the point
of view of a power management algorithm. The priority that
is set by this variable could be used by a control mechanism
that prevents over current situations by disconnecting first
ports with lower power priority. Ports that connect devices
critical to the operation of the network - like the E911
telephones ports - should be set to higher priority.

Context

MIB: ALU-POWER-ETHERNET-MIB
OID: .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.8
Type: column
Access: readwrite
Status: current
Parent: pethPsePortEntry
Table: pethPsePortTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	critical
`2`	high
`3`	low

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pethPsePortGroupIndex This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be …	column	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.1`
pethPsePortPowerMaintenanceStatus The value ok(1) indicates the Power Maintenance Signature is present and the overcurrent condition has not been detected. The value overCurrent (2) indicates an overcurrent condit…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.10`
pethPsePortMPSAbsentCounter Counts the number of times that the pethPsePortPowerMaintenanceStatus attribute changes from any value to the value mPSAbsent(3).	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.11`
pethPsePortOverCurrentCounter Counts the number of times that the aPSEPowerCurrentStatus attribute changes from any value to the value overCurrent(2).	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.12`
pethPsePortType A manager will set the value of this variable to a value that indicates the type of the device that is connected to theport. This value can be the result of the mapping the addres…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.13`
pethPsePortPowerClassifications Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.14`
pethPsePortIndex This variable uniquely identifies the power Ethernet PSE port within group pethPseGroupIndex to which the power Ethernet PSE entry is connected.	column	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.2`
pethPsePortAdminEnable Enables power supply on this port. Setting this object at a value enable(1) enables power and detection mechanism for this port. Setting this object at a value disable(2) disables…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.3`
pethPsePortPowerPairsControlAbility Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate that the device has the capability to control the …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.4`
pethPsePortPowerPairs Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.5`
pethPsePortPowerDetectionControl Controls the power detection mechanism of the port. Setting the value auto(1) enables the power detection mechanism of the port. Setting the value test(2) puts the port in a testm…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.6`
pethPsePortDetectionStatus Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state IDLE A value of searching(2)- indicates tha…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.7`