pethPsePortPowerClassifications

ALU-POWER-ETHERNET-MIB · .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.14

MIB view Table view

Object

column Enumeration

Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their power requirements.
              
The value is only valid while a valid PD is being detected as
indicated by the attribute pethPsePortDetectionStatus reporting
the value or deliveringPower(4).

Context

MIB: ALU-POWER-ETHERNET-MIB
OID: .1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.14
Type: column
Access: readonly
Status: current
Parent: pethPsePortEntry
Table: pethPsePortTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	class0
`2`	class1
`3`	class2
`4`	class3
`5`	class4

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pethPsePortGroupIndex This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be …	column	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.1`
pethPsePortPowerMaintenanceStatus The value ok(1) indicates the Power Maintenance Signature is present and the overcurrent condition has not been detected. The value overCurrent (2) indicates an overcurrent condit…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.10`
pethPsePortMPSAbsentCounter Counts the number of times that the pethPsePortPowerMaintenanceStatus attribute changes from any value to the value mPSAbsent(3).	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.11`
pethPsePortOverCurrentCounter Counts the number of times that the aPSEPowerCurrentStatus attribute changes from any value to the value overCurrent(2).	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.12`
pethPsePortType A manager will set the value of this variable to a value that indicates the type of the device that is connected to theport. This value can be the result of the mapping the addres…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.13`
pethPsePortIndex This variable uniquely identifies the power Ethernet PSE port within group pethPseGroupIndex to which the power Ethernet PSE entry is connected.	column	Integer32	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.2`
pethPsePortAdminEnable Enables power supply on this port. Setting this object at a value enable(1) enables power and detection mechanism for this port. Setting this object at a value disable(2) disables…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.3`
pethPsePortPowerPairsControlAbility Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate that the device has the capability to control the …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.4`
pethPsePortPowerPairs Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.5`
pethPsePortPowerDetectionControl Controls the power detection mechanism of the port. Setting the value auto(1) enables the power detection mechanism of the port. Setting the value test(2) puts the port in a testm…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.6`
pethPsePortDetectionStatus Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state IDLE A value of searching(2)- indicates tha…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.7`
pethPsePortPowerPriority This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanis…	column	Enumeration	`.1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.8`