tmnxTestHdResProfPayLdId
ALU-OAM-TEST-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.4
Object
column
SNMPv2-SMICounter64
The Testhead profile Pay Load Ids used for this test. It is same as tmnxTestHdSessPayLdId which is a 64 bit integer, every 8 bits represents a payload. For this release, we support up to 4 payloads per test session. So only 32 bits will be used. With each 8 bits, one bit will be set to represent the payload indexes used for the payload. e.g 0x020104 means payload 3,1 and 2 are used
Context
- MIB
- ALU-OAM-TEST-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tmnxTestHdResultsEntry
- Table
- tmnxTestHdResultsTable
- Siblings
- 44
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxTestHdOwnerName The owner name index of the Test head test. | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.1 |
| tmnxTestHdResMeasuredLatency The Latency measured for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.10 |
| tmnxTestHdResLatencyAccptanceResult The Latency Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.11 |
| tmnxTestHdResMeasuredJitter The Jitter measured for this test | column | microseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.12 |
| tmnxTestHdResJitterAccptanceResult The Jitter Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.13 |
| tmnxTestHdResSapPortId The sap port id ID used in for this test run. | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.14 |
| tmnxTestHdResSapEncapValue The sap encap value used in this test run. | column | TIMETRA-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.15 |
| tmnxTestHdResFLRAccptanceResult The FLR Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.16 |
| tmnxTestHdResMinLatency The Latency measured minimum for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.17 |
| tmnxTestHdResMaxLatency The Latency measured maximum for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.18 |
| tmnxTestHdResThruputAccptanceResult The Thruput Acceptance test result for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.19 |
| tmnxTestHdTestName The test name index of the Test head test. | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.2 |
| tmnxTestHdResInProfTransCount The total number of in profile packets injected | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.20 |
| tmnxTestHdResInProfRecvCount The total number of in profile packets received | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.21 |
| tmnxTestHdResInProfMeasuredThruput The in profile throughput measured for this test | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.22 |
| tmnxTestHdResInProfMeasuredFLR The in profile frame loss ratio measured for this test, if
set to -1 tmnxTestHdResInProfMeasuredFLR is not applicable
for this test | column | 10000th of a percent SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.23 |
| tmnxTestHdResInProfMeasuredLatency The in profile Latency measured for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.24 |
| tmnxTestHdResInProfLatencyAccptanceResult The in profile Latency Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.25 |
| tmnxTestHdResInProfMeasuredJitter The in profile Jitter measured for this test | column | microseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.26 |
| tmnxTestHdResInProfJitterAccptanceResult The in profile Jitter Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.27 |
| tmnxTestHdResInProfFLRAccptanceResult The in profile FLR Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.28 |
| tmnxTestHdResInProfMinLatency The in profile Latency measured minimum for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.29 |
| tmnxTestHdResProfId The Testhead profile Id used for this test | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.3 |
| tmnxTestHdResInProfMaxLatency The in profile Latency measured maximum for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.30 |
| tmnxTestHdResInProfThruputAccptanceResult The Thruput Acceptance test result for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.31 |
| tmnxTestHdResOutProfTransCount The total number of out profile packets injected | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.32 |
| tmnxTestHdResOutProfRecvCount The total number of out profile packets received | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.33 |
| tmnxTestHdResOutProfMeasuredThruput The out profile throughput measured for this test | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.34 |
| tmnxTestHdResOutProfMeasuredFLR The out profile frame loss ratio measured for this test, if
set to -1 tmnxTestHdResOutProfMeasuredFLR is not applicable
for this test | column | 10000th of a percent SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.35 |
| tmnxTestHdResOutProfMeasuredLatency The out profile Latency measured for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.36 |
| tmnxTestHdResOutProfLatencyAccptanceResult The out profile Latency Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.37 |
| tmnxTestHdResOutProfMeasuredJitter The out profile Jitter measured for this test | column | microseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.38 |
| tmnxTestHdResOutProfJitterAccptanceResult The out profile Jitter Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.39 |
| tmnxTestHdResOutProfFLRAccptanceResult The out profile FLR Acceptance for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.40 |
| tmnxTestHdResOutProfMinLatency The out profile Latency measured minimum for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.41 |
| tmnxTestHdResOutProfMaxLatency The out profile Latency measured maximum for this test | column | microseconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.42 |
| tmnxTestHdResOutProfThruputAccptanceResult The out profile Thruput Acceptance test result for this test | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.43 |
| tmnxTestHdResMarkerPktBandwidth The bandwidth (kbps) consumed by marker packets | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.44 |
| tmnxTestHdResOperThruput oper throughput at sap ingress as an aggregate value of
all payload throughput used for this test | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.45 |
| tmnxTestHdResProfAccCritId The Testhead profile Acceptance Criteria Id used
for this test | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.5 |
| tmnxTestHdResTransCount The total number of packets injected | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.6 |
| tmnxTestHdResRecvCount The total number of packets received | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.7 |
| tmnxTestHdResMeasuredThruput The throughput measured for this test | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.8 |
| tmnxTestHdResMeasuredFLR The frame loss ratio measured for this test, if
set to -1 tmnxTestHdResMeasuredFLR is not applicable
for this test | column | 10000th of a percent SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.21.1.5.1.9 |