alL2tpStatsTunnelControlOutOfWindow

ALTIGA-L2TP-STATS-MIB · .1.3.6.1.4.1.3076.2.1.2.16.2.1.18
MIB view Table view

Object

column SNMPv2-SMICounter32 
This object contains the number of control
packets that were received outside of the
offered receive window. It is implementation
specific as to whether these packets are queued
or discarded.

Context

MIB
ALTIGA-L2TP-STATS-MIB
OID
.1.3.6.1.4.1.3076.2.1.2.16.2.1.18
Type
column
Access
readonly
Status
current
Parent
alL2tpStatsTunnelEntry
Table
alL2tpStatsTunnelTable
Siblings
31

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alL2tpStatsTunnelRowStatus
The status of this row. Used to terminate the tunnel, cannot be used to create a tunnel.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3076.2.1.2.16.2.1.1
alL2tpStatsTunnelRemoteProtocolVersion
This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol r…
columnOctetString.1.3.6.1.4.1.3076.2.1.2.16.2.1.10
alL2tpStatsTunnelInitialRemoteRWS
This object contains the initial remote peer's receive window size as indicated by the tunnel peer (in the RWS AVP) during the tunnel establishment phase. If the tunnel is idle th…
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.11
alL2tpStatsTunnelBearerCapabilities
This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
columnEnumeration.1.3.6.1.4.1.3076.2.1.2.16.2.1.12
alL2tpStatsTunnelFramingCapabilities
This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
columnEnumeration.1.3.6.1.4.1.3076.2.1.2.16.2.1.13
alL2tpStatsTunnelControlRecvPackets
This object contains the number of control packets received on the tunnel.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.14
alL2tpStatsTunnelControlRecvDiscards
This object returns the number of received payload packets that were discarded.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.15
alL2tpStatsTunnelControlRecvZLB
This object returns a count of the number of Zero Length Body control packet acknowledgement packets that were received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.16
alL2tpStatsTunnelControlOutOfSequence
This object returns a count of the number of control packets that were not received in the correct order (as per the sequence number) on this tunnel.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.17
alL2tpStatsTunnelControlSendPackets
This object contains the number of control packets that were transmitted to the tunnel peer.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.19
alL2tpStatsTunnelPeerIpAddr
The peer's IP address for this tunnel.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.3076.2.1.2.16.2.1.2
alL2tpStatsTunnelControlSendZLB
This object contains the number of Zero Length Body control packets that were transmitted to the tunnel peer.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.20
alL2tpStatsTunnelControlAckTimeouts
This object returns a count of the number of control packet timeouts due to the lack of a timely acknowledgement from the tunnel peer.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.21
alL2tpStatsTunnelCurrentRemoteRWS
This object contains the current remote receive window size as determined by the local flow control mechanism employed.
columnUnsigned32.1.3.6.1.4.1.3076.2.1.2.16.2.1.22
alL2tpStatsTunnelSendSeq
This object contains the next send sequence number for the control channel.
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.23
alL2tpStatsTunnelSendSeqAck
This object contains the send sequence number that the tunnel peer has acknowledged for the control channel. The flow control state can be determined by subtracting the l2tpTunnel…
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.24
alL2tpStatsTunnelRecvSeq
This object contains the next receive sequence number expected to be received on this control channel.
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.25
alL2tpStatsTunnelRecvSeqAck
This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the control channel.
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.26
alL2tpStatsTunnelTotalSessions
This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.27
alL2tpStatsTunnelFailedSessions
This object contains the total number of sessions that were initiated but failed to reach the established phase.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.16.2.1.28
alL2tpStatsTunnelActiveSessions
This object contains the total number of sessions for this tunnel.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.3076.2.1.2.16.2.1.29
alL2tpStatsTunnelLocalTID
This object contains the local tunnel Identifier.
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.3
alL2tpStatsTunnelLastResultCode
This object contains the last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.30
alL2tpStatsTunnelLastErrorCode
This object contains the last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.31
alL2tpStatsTunnelLastErrorMessage
This object contains the last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3076.2.1.2.16.2.1.32
alL2tpStatsTunnelRemoteTID
This object contains the remote tunnel Identifier.
columnInteger32.1.3.6.1.4.1.3076.2.1.2.16.2.1.4
alL2tpStatsTunnelState
This field contains the current state of the control tunnel.
columnEnumeration.1.3.6.1.4.1.3076.2.1.2.16.2.1.5
alL2tpStatsTunnelInitiated
This object indicates whether the tunnel was initiated locally or by the remote tunnel peer.
columnEnumeration.1.3.6.1.4.1.3076.2.1.2.16.2.1.6
alL2tpStatsTunnelRemoteHostName
This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this object should maintain …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3076.2.1.2.16.2.1.7
alL2tpStatsTunnelRemoteVendorName
This object identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle this object should maintain its value from the last time it was connected.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3076.2.1.2.16.2.1.8
alL2tpStatsTunnelRemoteFirmwareRevision
This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connected.
columnOctetString.1.3.6.1.4.1.3076.2.1.2.16.2.1.9