alL2tpStatsTunnelBearerCapabilities
ALTIGA-L2TP-STATS-MIB ·
.1.3.6.1.4.1.3076.2.1.2.16.2.1.12
Object
column
Enumeration
This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
Context
- MIB
- ALTIGA-L2TP-STATS-MIB
- OID
.1.3.6.1.4.1.3076.2.1.2.16.2.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alL2tpStatsTunnelEntry
- Table
- alL2tpStatsTunnelTable
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | sync |
2 | async |
3 | syncAsync |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alL2tpStatsTunnelRowStatus The status of this row. Used to terminate the tunnel,
cannot be used to create a tunnel. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3076.2.1.2.16.2.1.1 |
| alL2tpStatsTunnelRemoteProtocolVersion This object describes the protocol version and
revision of the tunnel peers implementation. The
first octet contains the protocol version. The
second octet contains the protocol r… | column | OctetString | .1.3.6.1.4.1.3076.2.1.2.16.2.1.10 |
| alL2tpStatsTunnelInitialRemoteRWS This object contains the initial remote peer's
receive window size as indicated by the tunnel peer
(in the RWS AVP) during the tunnel establishment
phase. If the tunnel is idle th… | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.11 |
| alL2tpStatsTunnelFramingCapabilities This object describes the Framing Capabilities of
the tunnel peer. If the tunnel is idle this object
should maintain its value from the last time it was
connected. | column | Enumeration | .1.3.6.1.4.1.3076.2.1.2.16.2.1.13 |
| alL2tpStatsTunnelControlRecvPackets This object contains the number of control packets
received on the tunnel. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.14 |
| alL2tpStatsTunnelControlRecvDiscards This object returns the number of received payload
packets that were discarded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.15 |
| alL2tpStatsTunnelControlRecvZLB This object returns a count of the number of Zero
Length Body control packet acknowledgement packets
that were received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.16 |
| alL2tpStatsTunnelControlOutOfSequence This object returns a count of the number of
control packets that were not received in the
correct order (as per the sequence number) on
this tunnel. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.17 |
| alL2tpStatsTunnelControlOutOfWindow This object contains the number of control
packets that were received outside of the
offered receive window. It is implementation
specific as to whether these packets are queued
o… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.18 |
| alL2tpStatsTunnelControlSendPackets This object contains the number of control
packets that were transmitted to the tunnel
peer. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.19 |
| alL2tpStatsTunnelPeerIpAddr The peer's IP address for this tunnel. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3076.2.1.2.16.2.1.2 |
| alL2tpStatsTunnelControlSendZLB This object contains the number of Zero Length
Body control packets that were transmitted to
the tunnel peer. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.20 |
| alL2tpStatsTunnelControlAckTimeouts This object returns a count of the number of
control packet timeouts due to the lack of a
timely acknowledgement from the tunnel peer. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.21 |
| alL2tpStatsTunnelCurrentRemoteRWS This object contains the current remote receive
window size as determined by the local flow
control mechanism employed. | column | Unsigned32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.22 |
| alL2tpStatsTunnelSendSeq This object contains the next send sequence number
for the control channel. | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.23 |
| alL2tpStatsTunnelSendSeqAck This object contains the send sequence number that
the tunnel peer has acknowledged for the control
channel. The flow control state can be determined
by subtracting the l2tpTunnel… | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.24 |
| alL2tpStatsTunnelRecvSeq This object contains the next receive sequence
number expected to be received on this control
channel. | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.25 |
| alL2tpStatsTunnelRecvSeqAck This object contains the last receive sequence
number that was acknowledged back to the tunnel
peer for the control channel. | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.26 |
| alL2tpStatsTunnelTotalSessions This object contains the total number of sessions
that this tunnel has successfully connected through
to its tunnel peer since this tunnel was created. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.27 |
| alL2tpStatsTunnelFailedSessions This object contains the total number of sessions
that were initiated but failed to reach the
established phase. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.28 |
| alL2tpStatsTunnelActiveSessions This object contains the total number of sessions
for this tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.29 |
| alL2tpStatsTunnelLocalTID This object contains the local tunnel Identifier. | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.3 |
| alL2tpStatsTunnelLastResultCode This object contains the last value of the result
code as described in the Result Code AVP which
caused the tunnel to disconnect. | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.30 |
| alL2tpStatsTunnelLastErrorCode This object contains the last value of the error
code as described in the Result Code AVP which
caused the tunnel to disconnect. | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.31 |
| alL2tpStatsTunnelLastErrorMessage This object contains the last value of the optional
message as described in the Result Code AVP which
caused the tunnel to disconnect. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3076.2.1.2.16.2.1.32 |
| alL2tpStatsTunnelRemoteTID This object contains the remote tunnel Identifier. | column | Integer32 | .1.3.6.1.4.1.3076.2.1.2.16.2.1.4 |
| alL2tpStatsTunnelState This field contains the current state of the control
tunnel. | column | Enumeration | .1.3.6.1.4.1.3076.2.1.2.16.2.1.5 |
| alL2tpStatsTunnelInitiated This object indicates whether the tunnel was
initiated locally or by the remote tunnel peer. | column | Enumeration | .1.3.6.1.4.1.3076.2.1.2.16.2.1.6 |
| alL2tpStatsTunnelRemoteHostName This object contains the host name as discovered
during the tunnel establishment phase (via the Host
Name AVP) of the L2TP peer. If the tunnel is idle
this object should maintain … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3076.2.1.2.16.2.1.7 |
| alL2tpStatsTunnelRemoteVendorName This object identifies the vendor name of the peer's
L2TP implementation. If the tunnel is idle this
object should maintain its value from the last time
it was connected. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3076.2.1.2.16.2.1.8 |
| alL2tpStatsTunnelRemoteFirmwareRevision This object contains the tunnel peer's firmware
revision number. If the tunnel is idle this object
should maintain its value from the last time it
was connected. | column | OctetString | .1.3.6.1.4.1.3076.2.1.2.16.2.1.9 |