slbCurCfgGroupHealthCheckUrl
ALTEON-CHEETAH-LAYER4-MIB ·
.1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.6
Object
column
OctetString
The specific content which is examined during health checks. The content depends on the type of health check.
Context
- MIB
- ALTEON-CHEETAH-LAYER4-MIB
- OID
.1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- slbCurCfgGroupEntry
- Table
- slbCurCfgGroupTable
- Siblings
- 18
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-127
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slbCurCfgGroupIndex The group number for which the information pertains. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.1 |
| slbCurCfgGroupVipHealthCheck Enable or disable VIP health checking in DSR mode. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.10 |
| slbCurCfgGroupIdsState Enable or disable intrusion detection. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.11 |
| slbCurCfgGroupIdsPort The intrusion detection port. A value of 1 is invalid. | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.12 |
| slbCurCfgGroupIdsFlood Enable or disable intrusion detection group flood. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.13 |
| slbCurCfgGroupMinmissHash 24|32 number of ip bits used for minmisses hash in the
current_configuration block. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.14 |
| slbCurCfgGroupPhashMask IP address mask used by the persistent hash metric. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.15 |
| slbCurCfgGroupRmetric The metric used to select next rport in server. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.16 |
| slbCurCfgGroupHealthCheckFormula The formula used to state the actual health of a virtual service.
It allows user to use the symbols of '(', ')', '|', '&' to
construct a formula to state the health of the server… | column | OctetString | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.17 |
| slbCurCfgGroupOperatorAccess Enable or disable access to this group for operator. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.18 |
| slbCurCfgGroupWlm The Workload Manager for this Group. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.19 |
| slbCurCfgGroupRealServers The Real servers in the group. The servers are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...… | column | OctetString | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.2 |
| slbCurCfgGroupMetric The metric used to select next server in group. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.3 |
| slbCurCfgGroupBackupServer The backup real server for this group. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.4 |
| slbCurCfgGroupBackupGroup The backup real server group for this group. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.5 |
| slbCurCfgGroupHealthCheckLayer The OSI layer at which servers are health checked.
From version 29.0.0.0 the following values are not supported:
snmp2-snmp5, script1-script64. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.7 |
| slbCurCfgGroupName The name of the real server group. | column | OctetString | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.8 |
| slbCurCfgGroupRealThreshold The minimum number of real servers available. If at any time, the
number reaches this minimum limit, a SYSLOG ALERT message is send to
to the configured syslog servers stating t… | column | Integer32 | .1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.9 |