fltNewCfgAclIpLength

ALTEON-CHEETAH-LAYER4-MIB · .1.3.6.1.4.1.1872.2.5.4.1.2.3.1.70
MIB view Table view

Object

column r/w Integer32 
Set the IP maximum packet length in bytes. A value can be either 0 
which indicates 'any' length or between 64 and 65535.

Context

MIB
ALTEON-CHEETAH-LAYER4-MIB
OID
.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.70
Type
column
Access
readwrite
Status
current
Parent
fltNewCfgTableEntry
Table
fltNewCfgTable
Siblings
81

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fltNewCfgIndx
The filtering table index.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.1
fltNewCfgRangeHighDstPort
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.10
fltNewCfgAction
The action for the filtering rule.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.11
fltNewCfgRedirPort
The real server port number used for redirection.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.12
fltNewCfgRedirGroup
The real server group to be redirected to.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.13
fltNewCfgLog
Enable or disable logging.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.14
fltNewCfgState
The state of this filtering rule.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.15
fltNewCfgDelete
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of…
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.16
fltNewCfgNat
The selection of destination or source or multicast for network address translation.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.17
fltNewCfgCache
Enable or disable caching sessions that match filter.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.18
fltNewCfgInvert
Turn the invert logic on or off for the filter entry.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.19
fltNewCfgSrcIp
The source IP address to be filtered.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.2
fltNewCfgClientProxy
Enable or disable client proxy.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.20
fltNewCfgTcpAck
Enable or disable filtering on matching TCP ACK and RST flag.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.21
fltNewCfgSrcMac
The source MAC address to be filtered.
columnSNMPv2-TCPhysAddress.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.23
fltNewCfgDstMac
The Destination MAC address to be filtered.
columnSNMPv2-TCPhysAddress.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.24
fltNewCfgFtpNatActive
Enable or disable FTP NAT for active ftp.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.25
fltNewCfgAclTcpUrg
Enable or disable TCP URG packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.26
fltNewCfgAclTcpAck
Enable or disable TCP ACK packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.27
fltNewCfgAclTcpPsh
Enable or disable TCP PSH packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.28
fltNewCfgAclTcpRst
Enable or disable TCP RST packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.29
fltNewCfgSrcIpMask
The source IP sub-net mask for filtering.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.3
fltNewCfgAclTcpSyn
Enable or disable TCP SYN packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.30
fltNewCfgAclTcpFin
Enable or disable TCP FIN packet.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.31
fltNewCfgAclIcmp
ICMP type to be filtered. A ICMP type of 255 indicates 'any'
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.32
fltNewCfgAclIpOption
Enable or disable IP option matching.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.33
fltNewCfgBwmContract
Filt default BW contract number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.34
fltNewCfgAclIpTos
The IP TOS value to be filtered.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.35
fltNewCfgAclIpTosMask
The IP TOS mask for filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.36
fltNewCfgAclIpTosNew
The new IP TOS value to over-write when filtering fired.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.37
fltNewCfgFwlb
Enable or disable filtering on firewall redirect hash method.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.38
fltNewCfgNatTimeout
The NAT session timeout. The timeout value should be an even number between 4 and 32768.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.39
fltNewCfgDstIp
The destination IP address to be filtered.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.4
fltNewCfgLinklb
Enable or disable WAN link load balancing.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.40
fltNewCfgWapRadiusSnoop
Enable or disable WAP RADIUS snooping.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.41
fltNewCfgSrcIpMac
Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.42
fltNewCfgDstIpMac
Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.43
fltNewCfgIdslbHash
Set hash parameter for intrusion detection server load balancing.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.44
fltNewCfgVlan
Set the VLAN assoicated with the filter.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.45
fltNewCfgName
The name of the filter.
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.46
fltNewCfgTcpRateLimit
Enable or disable protocol rate limiting.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.47
fltNewCfgTcpRateMaxConn
Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. In the case of ICMP and UDP, this is the maximum packets (number of packets in un…
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.48
fltNewCfgHash
Set hash parameter for the filter.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.49
fltNewCfgDstIpMask
The destination IP sub-net mask for filtering.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.5
fltNewCfgLayer7DenyState
Enable or disable layer 7 deny filtering.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.51
fltNewCfgLayer7DenyUrlBmap
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTE…
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.52
fltNewCfgLayer7DenyAddUrl
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.53
fltNewCfgLayer7DenyRemUrl
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.54
fltNewCfgGotoFilter
The filter ID for GOTO action in the new config.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.55
fltNewCfgRadiusWapPersist
Enable or disable Radius/WAP persistence.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.56
fltNewCfgPbind
Enable or disable filter persistent binding.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.57
fltNewCfgTimeWindow
The time window for protocol rate limiting (in seconds).
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.58
fltNewCfgHoldDuration
The hold down duration for protocol rate limiting (in minutes).
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.59
fltNewCfgProtocol
The protocol to be filtered.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.6
fltNewCfgPatternMatch
Enable or disable binary pattern matching.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.60
fltNewCfgLayer7DenyMatchAll
Enable or disable match-all criteria for L7 deny string matching.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.61
fltNewCfgProxyIp
The client proxy IP address for NAT and REDIR filter.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.62
fltNewCfgLayer7ParseAll
Enable or disable layer 7 lookup (parsing) of all packets.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.63
fltNewCfgSecurityParseAll
Enable or disable pattern string lookup (parsing) of all packets.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.64
fltNewCfgPatternMatchGroupBmap
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx x…
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.65
fltNewCfgAddPatternMatchGroup
The pattern match group to be added to the security filter. A zero is returned when read.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.66
fltNewCfgRemPatternMatchGroup
The pattern match group to be to be removed from the security filter. A zero is returned when read.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.67
fltNewCfg8021pBitsValue
The 802.1p bits value to match.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.68
fltNewCfg8021pBitsMatch
Enable or disable matching on 802.1p bits in the packets.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.69
fltNewCfgRangeHighSrcPort
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.7
fltNewCfgIdsGroup
The real server group for IDS load balancing. A value of 0 indicates 'none'.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.71
fltNewCfgEgressPip
Enable or disable pip selection based on egress port/vlan.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.72
fltNewCfgDbind
Enable or disable filter delayed binding.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.73
fltNewCfgRevBwmContract
Filt reverse session BWM contract number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.74
fltNewCfgReverse
Enable or disable creating session for reverse side traffic.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.75
fltNewCfgParseChn
Enable or disable chained pgroup match criteria for l7 filtering.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.76
fltNewCfgRtpBwmContract
BWM contract for SIP RTP traffic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.77
fltNewCfgSipParsing
Enable or disable SIP NAT.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.78
fltNewCfgSessionMirror
Enable or disable session mirroring.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.79
fltNewCfgRangeLowSrcPort
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.8
fltNewCfgIpVer
The type of IP address.
columnEnumeration.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.80
fltNewCfgIpv6Sip
The source IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:…
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.81
fltNewCfgIpv6Sprefix
The prefix length associated with source IP address .
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.82
fltNewCfgIpv6Dip
The destination IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx…
columnOctetString.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.83
fltNewCfgIpv6Dprefix
The prefix length associated with destination IP address .
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.84
fltNewCfgRangeLowDstPort
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
columnInteger32.1.3.6.1.4.1.1872.2.5.4.1.2.3.1.9